Microstructure and strengthening mechanism of Si3N4/Invar joint brazed with TiNp-doped filler

被引：40
|
作者：
Wang, Tianpeng [1 ]
Liu, Chunfeng [1 ]
Leinenbach, Christian [2 ]
Zhang, Jie [1 ]
机构：
[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China
[2] Swiss Fed Labs Mat Sci & Technol, Lab Joining Technol & Corros, Empa, CH-8600 Dubendorf, Switzerland
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2016年 / 650卷
基金：
中国国家自然科学基金;
关键词：
Si3N4; ceramic; Inver alloy; Brazing; Composite filler; Nanoindentation; METAL-MATRIX COMPOSITES; SILICON-NITRIDE; INTERFACIAL MICROSTRUCTURE; TITANIUM CARBIDE; CARBON-FIBERS; TC4; ALLOY; FE-NI; SYSTEM; SI3N4; NANOSTRUCTURE;
D O I：
10.1016/j.msea.2015.10.038
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ag-Cu-Ti+TiNp composite filler was developed to braze Si3N4 ceramic to Invar alloy, and subsequently the effect of TiNp content on the microstructure and mechanical properties of the joints was investigated. The typical microstructure of the brazed joints is Si3N4/TiN+Ti2N+TiSi+Fe2Ti/Ag(s.s)+Cu(s.s)+TiNp/wavelike Fe2Ti+Ni3Ti/Ag-Cu eutectic/Invar alloy. With the increase of TiNp content, the reaction layers near the Si3N4 become thinner, and Ag-Cu eutectic appears less and finer between the ceramic and wavelike intermetallics. The maximum shear strength increases from 63 MPa to 229 MPa with the optimum TiNp content of 2 vol%, compared with the case without TiNp. The hardness and elastic modulus of the reaction phases were characterized by nanoindentation to reveal the strengthen of brazing seam. The following reasons are believed to strengthen the brazed joint: the thermal expansion coefficient (CTE) reduction of the composite filler, appropriate thickness of the Si3N4/braze reaction layer, the strengthen of the braze. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码：469 / 477
页数：9
相关论文
共 50 条
  • [41] Microstructure and Properties of Si3N4 Ceramics and 304 Stainless Steel Brazed Joint with Cu/Ag-Cu/Ti Laminated Filler Metal
    Xu, X. P.
    Liu, Q. M.
    Xia, C. Z.
    Zou, J. S.
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2018, 37 (06) : 597 - 602
  • [42] Effect of holding time on microstructure and mechanical properties of Si3N4/Si3N4 joints brazed with Au58.7Ni36.5V4.8 filler alloy
    Sun, Y.
    Zhang, J.
    Fan, G. H.
    He, Y. M.
    Shibayanagi, T.
    JOURNAL OF MATERIALS SCIENCE, 2011, 46 (17) : 5830 - 5837
  • [43] Interfacial microstructure and joining properties of TiAl/Si3N4 brazed joints
    Song, X. G.
    Cao, J.
    Li, C.
    Feng, J. C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (22-23): : 7030 - 7035
  • [44] Effect of holding time on microstructure and mechanical properties of Si3N4/Si3N4 joints brazed with Au58.7Ni36.5V4.8 filler alloy
    Y. Sun
    J. Zhang
    G. H. Fan
    Y. M. He
    T. Shibayanagi
    Journal of Materials Science, 2011, 46 : 5830 - 5837
  • [45] Research on the Strengthening Mechanism of MWCNTs-Cuf Composite Interlayer for Si3N4/TC4 Brazed Joints
    Li, B.
    Cao, L.
    Liu, Q.
    Gao, J.
    Li, R.
    WELDING JOURNAL, 2025, 104 (01)
  • [46] y Microstructure and Mechanical Properties of the Joint between Si3N4 and Mo Brazed by Near-Eutectic Ag-Cu-In-Ti Filler Alloy
    Zhao, Tong
    Mo, Defeng
    Shi, Xinmin
    Sun, Wen
    Li, Xue
    Gong, Haimei
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (21)
  • [47] Microstructure of brazed joints between mechanically metallized Si3N4 and stainless steel
    Rubens Maribondo Do Nascimento
    Antonio Eduardo Martinelli
    Augusto José De Almeida Buschinelli
    Uwe Reisgen
    Josef Remmel
    Journal of Materials Science, 2005, 40 : 4549 - 4556
  • [48] Microstructure of brazed joints between mechanically metallized Si3N4 and stainless steel
    Do Nascimento, RM
    Martinelli, AE
    JOURNAL OF MATERIALS SCIENCE, 2005, 40 (17) : 4549 - 4556
  • [49] Effect of active metal on bonding characteristics and interfacial structure of the Si3N4/Si3N4 joints brazed by Ag-Cu filler metal
    Morizono, Yasuhiro
    Nakata, Takashi
    Nishida, Minoru
    Chiba, Akira
    Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan, 1995, 103 (1200): : 810 - 815
  • [50] Brazed joint of chemically Ni-plated Si3N4 ceramics to metal
    Yin, Shengyi
    Cailiao Kexue yu Gongyi/Material Science and Technology, 2000, 8 (01): : 40 - 43
12345