Microstructure and strengthening mechanism of Si3N4/Invar joint brazed with TiNp-doped filler

被引：40
|
作者：
Wang, Tianpeng [1 ]
Liu, Chunfeng [1 ]
Leinenbach, Christian [2 ]
Zhang, Jie [1 ]
机构：
[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China
[2] Swiss Fed Labs Mat Sci & Technol, Lab Joining Technol & Corros, Empa, CH-8600 Dubendorf, Switzerland
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2016年 / 650卷
基金：
中国国家自然科学基金;
关键词：
Si3N4; ceramic; Inver alloy; Brazing; Composite filler; Nanoindentation; METAL-MATRIX COMPOSITES; SILICON-NITRIDE; INTERFACIAL MICROSTRUCTURE; TITANIUM CARBIDE; CARBON-FIBERS; TC4; ALLOY; FE-NI; SYSTEM; SI3N4; NANOSTRUCTURE;
D O I：
10.1016/j.msea.2015.10.038
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ag-Cu-Ti+TiNp composite filler was developed to braze Si3N4 ceramic to Invar alloy, and subsequently the effect of TiNp content on the microstructure and mechanical properties of the joints was investigated. The typical microstructure of the brazed joints is Si3N4/TiN+Ti2N+TiSi+Fe2Ti/Ag(s.s)+Cu(s.s)+TiNp/wavelike Fe2Ti+Ni3Ti/Ag-Cu eutectic/Invar alloy. With the increase of TiNp content, the reaction layers near the Si3N4 become thinner, and Ag-Cu eutectic appears less and finer between the ceramic and wavelike intermetallics. The maximum shear strength increases from 63 MPa to 229 MPa with the optimum TiNp content of 2 vol%, compared with the case without TiNp. The hardness and elastic modulus of the reaction phases were characterized by nanoindentation to reveal the strengthen of brazing seam. The following reasons are believed to strengthen the brazed joint: the thermal expansion coefficient (CTE) reduction of the composite filler, appropriate thickness of the Si3N4/braze reaction layer, the strengthen of the braze. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码：469 / 477
页数：9
相关论文
共 50 条
  • [31] EFFECT OF Ti CONTENT ON THE MICROSTRUCTURE AND PROPERTIES OF Si3n4/Si3N4 JOINT BRAZED USING Cu-Zn-Ti ALLOY
    M. Naka
    J. Zhang
    H. Y. Fang (1.Joining and Welding Research Institute
    ActaMetallurgicaSinica(EnglishLetters), 2000, (01) : 23 - 27
  • [32] Interfacial structure and strength of Si3N4 ceramics joint brazed with amorphous filler metal and Cu layer
    Zou, Jiasheng
    Zeng, Peng
    Xu, Xiangping
    Hanjie Xuebao/Transactions of the China Welding Institution, 2012, 33 (11): : 47 - 50
  • [33] Effect of Si3N4-particles addition in Ag-Cu-Ti filler alloy on Si3N4/TiAl brazed joint
    Song, X. G.
    Cao, J.
    Wang, Y. F.
    Feng, J. C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (15): : 5135 - 5140
  • [34] Effect of Ti Content on Microstructure and Mechanical Properties of Si3N4/Si3N4 Joints Brazed with Ag-Cu-Ti plus Mo Composite Filler
    Zhang, Jie
    He, Yanming
    PRICM 7, PTS 1-3, 2010, 654-656 : 2018 - 2021
  • [35] Effect of brazing temperature on microstructure and mechanical properties of Si3N4/Si3N4 joints brazed with Ag-Cu-Ti plus Mo composite filler
    He, Y. M.
    Zhang, J.
    Wang, X.
    Sun, Y.
    JOURNAL OF MATERIALS SCIENCE, 2011, 46 (08) : 2796 - 2804
  • [36] Laser surface nanostructuring for reliable Si3N4/Si3N4 and Si3N4/Invar joined components
    Salvo, Milena
    Casalegno, Valentina
    Suess, Manuela
    Gozzelino, Laura
    Wilhelmi, Christian
    CERAMICS INTERNATIONAL, 2018, 44 (16) : 20596 - 20597
  • [37] Laser surface nanostructuring for reliable Si3N4/Si3N4 and Si3N4/Invar joined components
    Salvo, Milena
    Casalegno, Valentina
    Suess, Manuela
    Gozzelino, Laura
    Wilhelmi, Christian
    CERAMICS INTERNATIONAL, 2018, 44 (11) : 12081 - 12087
  • [38] Reaction phases in SiC/SiC or Si3N4/Si3N4 joint brazed with Cu-Ti alloys
    Tamai, T
    Naka, M
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1996, 15 (12) : 1025 - 1027
  • [39] Properties and fracture processes of Si3N4/Si3N4 joints brazed using Cu-Zn-Ti filler alloy
    Zhang, J
    Naka, M
    Fang, HY
    Zhou, Y
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2004, 9 (02) : 158 - 162
  • [40] A TEM analysis of the Si3N4/Si3N4 joint with a Cu-Zn-Ti filler metal
    Zhang, J
    Liu, CF
    Naka, M
    Meng, QC
    Zhou, Y
    JOURNAL OF MATERIALS SCIENCE, 2004, 39 (14) : 4587 - 4591
12345