Microstructure and strengthening mechanism of Si3N4/Invar joint brazed with TiNp-doped filler

被引：40
|
作者：
Wang, Tianpeng [1 ]
Liu, Chunfeng [1 ]
Leinenbach, Christian [2 ]
Zhang, Jie [1 ]
机构：
[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China
[2] Swiss Fed Labs Mat Sci & Technol, Lab Joining Technol & Corros, Empa, CH-8600 Dubendorf, Switzerland
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2016年 / 650卷
基金：
中国国家自然科学基金;
关键词：
Si3N4; ceramic; Inver alloy; Brazing; Composite filler; Nanoindentation; METAL-MATRIX COMPOSITES; SILICON-NITRIDE; INTERFACIAL MICROSTRUCTURE; TITANIUM CARBIDE; CARBON-FIBERS; TC4; ALLOY; FE-NI; SYSTEM; SI3N4; NANOSTRUCTURE;
D O I：
10.1016/j.msea.2015.10.038
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ag-Cu-Ti+TiNp composite filler was developed to braze Si3N4 ceramic to Invar alloy, and subsequently the effect of TiNp content on the microstructure and mechanical properties of the joints was investigated. The typical microstructure of the brazed joints is Si3N4/TiN+Ti2N+TiSi+Fe2Ti/Ag(s.s)+Cu(s.s)+TiNp/wavelike Fe2Ti+Ni3Ti/Ag-Cu eutectic/Invar alloy. With the increase of TiNp content, the reaction layers near the Si3N4 become thinner, and Ag-Cu eutectic appears less and finer between the ceramic and wavelike intermetallics. The maximum shear strength increases from 63 MPa to 229 MPa with the optimum TiNp content of 2 vol%, compared with the case without TiNp. The hardness and elastic modulus of the reaction phases were characterized by nanoindentation to reveal the strengthen of brazing seam. The following reasons are believed to strengthen the brazed joint: the thermal expansion coefficient (CTE) reduction of the composite filler, appropriate thickness of the Si3N4/braze reaction layer, the strengthen of the braze. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码：469 / 477
页数：9
相关论文
共 50 条
  • [21] Ag effect on microstructures and strength of Si3N4/Si3N4 joint brazed with Cu-Ag-Ti filler metals
    Tamai, F
    Naka, M
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1996, 15 (15) : 1353 - 1354
  • [22] Interfacial microstructure of Si3N4/Si3N4 brazing joint with Cu-Zn-Ti filler alloy
    Zhang, J.
    Zhang, X. M.
    Zhou, Y.
    Naka, M.
    Svetlana, Atroshenko
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 495 (1-2): : 271 - 275
  • [23] Microstructure and properties of the Si3N4/Si3N4 brazing joint
    Zhang, J
    Naka, N
    Zhou, Y
    Lei, TQ
    MECHANICS AND MATERIAL ENGINEERING FOR SCIENCE AND EXPERIMENTS, 2001, : 222 - 225
  • [24] Effect of Ti content on microstructure and strength of Si3N4/Si3N4 joints brazed with Cu-Pd-Ti filler metals
    Liu, C. F.
    Zhang, J.
    Zhou, Y.
    Meng, Q. C.
    Naka, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 491 (1-2): : 483 - 487
  • [25] Ti effect on microstructure and strength of Si3N4/Si3N4 and SiC/SiC joints brazed with Cu-Ag-Ti filler metals
    Tamai, T
    Naka, M
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1996, 15 (14) : 1203 - 1204
  • [26] Microstructure and mechanical strength of the active metal brazed Si3N4/Cu joint with AgCuTi/Cu foam/AgCuTi composite filler
    Wang, Ying
    Feng, Wei
    Zhang, Ruizhi
    Liu, Ruxia
    Xiao, Yong
    Luo, Guoqiang
    Shen, Qiang
    Zhang, Jian
    WELDING IN THE WORLD, 2025,
  • [27] Effect of brazing temperature on microstructure and mechanical properties of Si3N4/Si3N4 joints brazed with Ag–Cu–Ti + Mo composite filler
    Y. M. He
    J. Zhang
    X. Wang
    Y. Sun
    Journal of Materials Science, 2011, 46 : 2796 - 2804
  • [28] Microstructure evolution of the Si3N4/Si3N4 joints brazed using Au-Ni-V filler alloys with different V content
    Sun, Y.
    Zhang, J.
    Zhang, H. W.
    Fan, G. H.
    He, Y. M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (33) : 8407 - 8412
  • [29] Interfacial reaction and growth behavior of reaction layer of Si3N4/Si3N4 joint brazed by Cu-Zn-Ti filler alloy
    Zhang, J
    Zhou, Y
    Naka, M
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 : 261 - 265
  • [30] Effect of Ti content on the microstructure and properties of Si3N4/Si3N4 joint brazed using Cu-Zn-Ti alloy
    Naka, M.
    Zhang, J
    Fang, H.Y.
    Acta Metallurgica Sinica (English Letters), 2000, 13 (01) : 23 - 27
12345