Ceramics bonding using solder glass frit

被引：0
|
作者：
Z. Sun
D. Pan
J. Wei
C. K. Wong
机构：
[1] Singapore Institute of Manufacturing Technology,
来源：
Journal of Electronic Materials | 2004年 / 33卷
关键词：
Ceramics; bonding; surface treatment; solder glass frit; processing parameters; surface roughness; surface-contact angle;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Ceramics bonding is becoming an important technology and has found wide applications in different engineering and electronic industries. In this paper, furnace bonding of ceramics using solder glass frit was investigated with emphasis on the effects of surface treatment and bonding conditions on bonding strength. Alumina (Al2O3) sheet and SCHOTT solder glass G017-393 were used as the base and brazing filler materials, respectively. Chemical surface treatments using various acids were tested. The results reveal the effects of spreading and voids on bonding strength. An optimum bonding strength can be produced by an appropriate combination of bonded glass-frit density and spreading area. Bonding strength is not only related to surface-contact angle but also surface roughness. The study shows that high-quality ceramics bonding or sealing can be achieved with the application of appropriate bonding conditions.
引用
收藏
页码：1516 / 1523
页数：7
相关论文
共 50 条
  • [41] Wafer level vacuum packaging of scanning micro-mirrors using glass-frit and anodic bonding methods
    Langa, S.
    Drabe, C.
    Kunath, C.
    Dreyhaupt, A.
    Schenk, H.
    RELIABILITY, PACKAGING, TESTING, AND CHARACTERIZATION OF MOEMS/MEMS AND NANODEVICES XII, 2013, 8614
  • [42] Laser-assisted Glass Frit Bonding Combined With Blue Light-shielding
    Yang, Yanan
    Li, Yi
    Yang, Jun
    Yin, Luqiao
    Chen, Longlong
    Zhang, Jianhua
    ICEPT2019: THE 2019 20TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, 2019,
  • [43] Void Suppression in Glass Frit Bonding Via Three-Step Annealing Process
    Liu, Yifang
    Chen, Junyu
    Jiang, Jiaxin
    Zheng, Gaofeng
    MICROMACHINES, 2022, 13 (12)
  • [44] Effect of frit size on sintering, crystallization and electrical properties of wollastonite glass-ceramics
    Mohammadi, M.
    Alizadeh, P.
    Atlasbaf, Z.
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2011, 357 (01) : 150 - 156
  • [45] Evaluation of an experimental glass frit free thick film metallization for AlN-ceramics
    Smetana, W
    Reicher, R
    INFORMACIJE MIDEM-JOURNAL OF MICROELECTRONICS ELECTRONIC COMPONENTS AND MATERIALS, 1997, 27 (04): : 260 - 266
  • [46] NEW FRIT SEALS FOR THE BONDING OF GLASS-CERAMICS OF ABOUT ZERO COEFFICIENT OF THERMAL-EXPANSION, AND OF VITREOUS SILICA AND BOROSILICATE GLASSES OF LOW CTE
    SACK, W
    KIEFER, W
    GLASS TECHNOLOGY, 1984, 25 (02): : 63 - 63
  • [47] Study of glass frit induced stiction using a micromirror array
    Ling, F. Z.
    De Coster, J.
    Witvrouw, A.
    Cells, J.
    De Wolf, I.
    MICROELECTRONICS RELIABILITY, 2012, 52 (9-10) : 2256 - 2260
  • [48] Effect of high-temperature glass frit bonding process on performance of polysilicon strain gauges
    Kim, Yongdae
    Kwon, Sejin
    MICRO & NANO LETTERS, 2012, 7 (09): : 932 - 935
  • [49] Effect of passivation on frit glass bonding method for wafer level hermetic sealing on MEMS devices
    Chong, SC
    Zhang, XL
    Mohanraj, S
    Premachandran, CS
    Ranganathan, N
    PROCEEDINGS OF 5TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE, 2003, : 307 - 310
  • [50] Effect of frit added in Ag-paste on warpage of multilayered glass-ceramics substrate
    Moriya, Yoichi
    Yamade, Yoshiaki
    Shin-Ya, Ryuji
    Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan, 1999, 107 (1252): : 1211 - 1215
12345