Ceramics bonding using solder glass frit

被引：0
|
作者：
Z. Sun
D. Pan
J. Wei
C. K. Wong
机构：
[1] Singapore Institute of Manufacturing Technology,
来源：
Journal of Electronic Materials | 2004年 / 33卷
关键词：
Ceramics; bonding; surface treatment; solder glass frit; processing parameters; surface roughness; surface-contact angle;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Ceramics bonding is becoming an important technology and has found wide applications in different engineering and electronic industries. In this paper, furnace bonding of ceramics using solder glass frit was investigated with emphasis on the effects of surface treatment and bonding conditions on bonding strength. Alumina (Al2O3) sheet and SCHOTT solder glass G017-393 were used as the base and brazing filler materials, respectively. Chemical surface treatments using various acids were tested. The results reveal the effects of spreading and voids on bonding strength. An optimum bonding strength can be produced by an appropriate combination of bonded glass-frit density and spreading area. Bonding strength is not only related to surface-contact angle but also surface roughness. The study shows that high-quality ceramics bonding or sealing can be achieved with the application of appropriate bonding conditions.
引用
收藏
页码：1516 / 1523
页数：7
相关论文
共 50 条
  • [31] A Novel Technique for the Connection of Ceramic and Titanium Implant Components Using Glass Solder Bonding
    Mick, Enrico
    Tinschert, Joachim
    Mitrovic, Aurica
    Bader, Rainer
    MATERIALS, 2015, 8 (07): : 4287 - 4298
  • [32] Glass frit bonding with controlled width and height using a two-step wet silicon etching procedure
    Liu Yifang
    Chen Daner
    Lin Liwei
    Zheng Gaofeng
    Zheng Jianyi
    Wang Lingyun
    Sun Daoheng
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2016, 26 (03)
  • [33] Microwave Characterization of a Wafer-Level Packaging Approach for RF MEMS Devices Using Glass Frit Bonding
    Comart, Ilker
    Topalli, Kagan
    Demir, Simsek
    Akin, Tayfun
    IEEE SENSORS JOURNAL, 2014, 14 (06) : 2006 - 2011
  • [34] Sintering process of mixed solvent system frit to improve the performance of the film in glass/glass laser bonding
    Li, Yi
    Tian, Rui
    Yin, Luqiao
    Zhang, Jianhua
    2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 103 - 107
  • [35] Enhanced bonding strength of Al2O3/AlN ceramics joined via glass frit with gradient thermal expansion coefficient
    Ji, Yanru
    Fu, Renli
    Lv, Jinling
    Zhang, Xinyao
    Chen, Xudong
    Li, Guojun
    Liu, Xuhai
    CERAMICS INTERNATIONAL, 2020, 46 (08) : 12806 - 12811
  • [36] Warpage and Stress Optimization of Wafer-level Package of MEMS with Glass Frit Bonding
    Xu, Gaowei
    Zhu, Chunsheng
    Ye, Jiaotuo
    Li, Heng
    Gai, Wei
    Luo, Le
    2014 15TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2014, : 1075 - 1079
  • [37] Glass Frit Wafer Bonding for Encapsulating Monolithic Integrated CMOS-MEMS Devices
    Knechtel, R.
    Zellmer, M.
    Schikowski, M.
    Behmueller, M.
    Van Buggenhout, C.
    Petropoulos, A.
    SEMICONDUCTOR WAFER BONDING: SCIENCE, TECHNOLOGY, AND APPLICATIONS 15, 2018, 86 (05): : 111 - 118
  • [38] Effect of the viscosity of organic carrier on the quality of laser-assisted glass frit bonding
    Li, Yi
    Xiao, Yanyi
    Wang, Wen
    Yin, Luqiao
    Zhang, Jianhua
    2016 17TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2016, : 1146 - 1150
  • [39] Optimization of laser-assisted glass frit bonding process by response surface methodology
    Wang, Wen
    Xiao, Yanyi
    Wu, Xingyang
    Zhang, Jianhua
    OPTICS AND LASER TECHNOLOGY, 2016, 77 : 111 - 115
  • [40] Effect of Process Variables on Glass Frit Wafer Bonding in MEMS Wafer Level Packaging
    Sridharan, S.
    Henry, J.
    Maloney, J.
    Gardner, B.
    Mason, K.
    Dragoi, V.
    Burggraf, J.
    Pabo, E.
    Cakmak, E.
    MICROELECTROMECHANCIAL SYSTEMS - MATERIALS AND DEVICES II, 2009, 1139 : 133 - +
12345