Low-pressure Cu-Cu bonding using in-situ surface-modified microscale Cu particles for power device packaging

被引：117

作者：

Liu, Xiangdong ^{[1
,2
]}

Nishikawa, Hiroshi ^{[1
]}

机构：

[1] Osaka Univ, Joining & Welding Res Inst, 11-1 Mihogaoka, Osaka 5670047, Japan

[2] Osaka Univ, Grad Sch Engn, 2-1 Yamadaoka, Suita, Osaka 5650871, Japan

来源：

SCRIPTA MATERIALIA | 2016年 / 120卷

关键词：

Sintering; Surface modification; Copper; Oxides; Oxidation-reduction bonding; NANOPARTICLES; COPPER; ELECTRONICS; OXIDATION; PASTE;

D O I：

10.1016/j.scriptamat.2016.04.018

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

An oxidation-reduction bonding (ORB) was applied to achieve Cu-Cu bonding with microscale Cu particle paste. During sintering at 300 degrees C, Cu2O nanoparticles were homogeneously formed on the surface of the microscale Cu particles through a thermal oxidation, and were subsequently reduced to Cu nanotextured surface in formic acid atmosphere. This in-situ surface modification significantly enhances the sinterability of the microscale Cu particles, leading to a well-sintered microstructure and a three times higher bonding strength than that of the bonding joints prepared with non-oxidation bonding (NOB). (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：80 / 84

页数：5

共 50 条

[41] Low-Temperature Cu-Cu Bonding Using Silver Nanoparticles Fabricated by Physical Vapor Deposition
Zijian Wu
Jian Cai
Junqiang Wang
Zhiting Geng
Qian Wang
Journal of Electronic Materials, 2018, 47 : 988 - 993
[42] Direct Cu-Cu bonding by low-temperature sintering using three-dimensional nanostructured plated Cu films
Arai, Susumu
Nakajima, Soichiro
Shimizu, Masahiro
Horita, Masaomi
Aizawa, Mitsuhiro
Kiyoshi, Oi
MATERIALS TODAY COMMUNICATIONS, 2023, 35
[43] The study of Cu-Cu low temperature bonding using formic acid treatment with/without Pt catalyst
Yang, Wenhua
Lu, Yangting
Tadatomo, Suga
2016 17TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2016, : 784 - 787
[44] Low Temperature Cu-Cu Bonding with Electroless Deposited Metal Passivation for Fine-Pitch 3D Packaging
Huang, Yuan-Chiu
Liu, Demin
Hsiung, Kuma
Chou, Tzu-Chieh
Hu, Han-Wen
Sundarrajan, Arvind
Chang, Hsin Chi
Pan, Yi-Yu
Weng, Ming-Wei
Chen, Kuan-Neng
IEEE 71ST ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2021), 2021, : 377 - 382
[45] Low temperature and low pressure bonding of plateless Cu-Cu substrates by Ag-based transient liquid phase sintering
Muhammad, Khairi Faiz
Yamamoto, Takehiro
Yoshida, Makoto
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2017, 28 (13) : 9351 - 9362
[46] Effect of Various Parameters on the Shear Strength of Solid-State Nanoporous Cu Bonding in Cu–Cu Disks for Power Device Packaging
Byungho Park
Duy Le Han
Mikiko Saito
Jun Mizuno
Hiroshi Nishikawa
Journal of Electronic Materials, 2022, 51 : 3851 - 3862
[47] Cu-Cu diffusion bonding enhancement at low temperature by surface passivation using self-assembled monolayer of alkane-thiol
Tan, C. S.
Lim, D. F.
Singh, S. G.
Goulet, S. K.
Bergkvist, M.
APPLIED PHYSICS LETTERS, 2009, 95 (19)
[48] Ultra-thin Ti passivation mediated breakthrough in high quality Cu-Cu bonding at low temperature and pressure
Panigrahi, Asisa Kumar
Bonam, Satish
Ghosh, Tamal
Singh, Shiv Govind
Vanjari, Siva Rama Krishna
MATERIALS LETTERS, 2016, 169 : 269 - 272
[49] Fine-Pitch 30 μm Cu-Cu Bonding by Using Low Temperature Microfluidic Electroless Interconnection
Lin, Yung-Sheng
Hung, Yun-Ching
Kao, Chin-Li
Lai, Chung-Hung
Shih, Po-Shao
Huang, Jeng-Hau
Tarng, David
Kao, C. Robert
IEEE 72ND ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2022), 2022, : 177 - 181
[50] Low temperature Cu-Cu direct bonding for 3D-IC by using fine crystal layer
Sakai, Taiji
Imaizumi, Nobuhiro
Miyajima, Toyoo
2012 2ND IEEE CPMT SYMPOSIUM JAPAN, 2012,

← 1 2 3 4 5 →