Low-pressure Cu-Cu bonding using in-situ surface-modified microscale Cu particles for power device packaging

被引：117

作者：

Liu, Xiangdong ^{[1
,2
]}

Nishikawa, Hiroshi ^{[1
]}

机构：

[1] Osaka Univ, Joining & Welding Res Inst, 11-1 Mihogaoka, Osaka 5670047, Japan

[2] Osaka Univ, Grad Sch Engn, 2-1 Yamadaoka, Suita, Osaka 5650871, Japan

来源：

SCRIPTA MATERIALIA | 2016年 / 120卷

关键词：

Sintering; Surface modification; Copper; Oxides; Oxidation-reduction bonding; NANOPARTICLES; COPPER; ELECTRONICS; OXIDATION; PASTE;

D O I：

10.1016/j.scriptamat.2016.04.018

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

An oxidation-reduction bonding (ORB) was applied to achieve Cu-Cu bonding with microscale Cu particle paste. During sintering at 300 degrees C, Cu2O nanoparticles were homogeneously formed on the surface of the microscale Cu particles through a thermal oxidation, and were subsequently reduced to Cu nanotextured surface in formic acid atmosphere. This in-situ surface modification significantly enhances the sinterability of the microscale Cu particles, leading to a well-sintered microstructure and a three times higher bonding strength than that of the bonding joints prepared with non-oxidation bonding (NOB). (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：80 / 84

页数：5

共 50 条

[31] Robust Cu-Cu Bonding with Multiscale Coralloid Nano-Cu3Sn Paste for High-Power Electronics Packaging
Guo, Longjun
Liu, Wei
Ji, Xiaoliang
Zhong, Ying
Hang, Chunjin
Wang, Chunqing
ACS APPLIED ELECTRONIC MATERIALS, 2022, 4 (07) : 3457 - 3469
[32] Low-Pressure Sintering Bonding with Cu and CuO Flake Paste for Power Devices
Park, S. W.
Uwataki, R.
Nagao, S.
Sugahara, T.
Katoh, Y.
Ishino, H.
Sugiura, K.
Tsuruta, K.
Suganuma, K.
2014 IEEE 64TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2014, : 1179 - 1182
[33] Low Temperature Cu-Cu Bonding Using Ag Nanostructure for 3D Integration
Liu, Ziyu
Cai, Jian
Wang, Qian
Tan, Lin
Hun, Yang
ECS SOLID STATE LETTERS, 2015, 4 (10) : P75 - P76
[34] Low Temperature Fine-pitch Cu-Cu Bonding Using Au Nanoparticles as Intermediate
Fang, Jun-Peng
Cai, Jian
Wang, Qian
Shi, Xiu-Yu
Zheng, Kai
Zhou, Yi-Kang
IEEE 72ND ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2022), 2022, : 701 - 706
[35] Low-Temperature Cu-Cu Bonding by Using Cu2O Nanoparticle Coated Hierarchical Structure
Liu, Jiaxin
Mou, Yun
Liu, Jinglong
Peng, Yang
Chen, Mingxiang
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2022, 12 (05): : 878 - 882
[36] Glycerol surface pretreatment enabled Cu-Cu low-temperature direct bonding in ambient air
Yang, Wenhua
Lu, Kang
Tan, Zhenling
Xie, Chao
Huang, Zhixiang
MATERIALS LETTERS, 2025, 378
[37] Simulation Analysis of Structure Design for Low Temperature Cu-Cu Direct Bonding in Heterogeneous Integration and Advanced Packaging Systems
Pan, Yu-Ming
Yang, Yu-Tao
Chou, Tzu-Chieh
Yu, Ting-Yang
Yang, Kai-Ming
Ko, Cheng-Ta
Chen, Yu-Hua
Tseng, Tzyy-Jang
Chen, Kuan-Neng
2018 13TH INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE (IMPACT), 2018, : 111 - 114
[38] A Low-Cost Passivation for Low Temperature Cu-Cu Bonding Using PVD-Deposited Cu3N
Hung, Tzu-Heng
Liu, Ping-Jung
Wang, Chiao-Yen
Chung, Tsai-Fu
Chen, Kuan-Neng
IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY, 2023, 11 : 473 - 479
[39] Novel Ag salt paste for large area Cu-Cu bonding in low temperature low pressure and air condition
Chen, Chuantong
Zhang, Bowen
Suganuma, Katsuaki
Sekiguchi, Takuya
IEEE 72ND ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2022), 2022, : 1126 - 1132
[40] Low-Temperature Cu-Cu Bonding Using Silver Nanoparticles Fabricated by Physical Vapor Deposition
Wu, Zijian
Cai, Jian
Wang, Junqiang
Geng, Zhiting
Wang, Qian
JOURNAL OF ELECTRONIC MATERIALS, 2018, 47 (02) : 988 - 993

← 1 2 3 4 5 →