ELECTROMAGNETIC METAL LEVEL SENSOR IN A BILLET MOLD

被引：0
|
作者：
Terekhin, I. V. [1 ]
Romanov, S. A. [2 ]
Savin, I. S. [1 ]
机构：
[1] NPO Tekhnoap LLC, Lytkarino, Moscow Region, Russia
[2] JSC NLMK Ural, Revda, Sverdlovsk Regi, Russia
来源：
METALLURGIST | 2018年 / 62卷 / 7-8期
关键词：
continuous casting; billet mold; metal level; level control; electromagnetic sensor; radioisotope sensor; built-in sensor;
D O I：
10.1007/s11015-018-0715-x
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A new electromagnetic metal level sensor for a billet mold is considered in comparison with radioisotope level sensor. Comparative characteristics of the sensors in the process of casting with oil were obtained during demonstration testing of electromagnetic sensor at two metallurgical plants. In the process of operation, it was shown that electromagnetic metal level sensor has somewhat better characteristics as compared to radioisotope sensor. Utilization of electromagnetic sensor instead of radioisotope sensor allowed reducing the fluctuations of metal level and withdrawal rate in comparison with stabilization based on the radioisotope sensor at both plants.
引用
收藏
页码：729 / 737
页数：9
相关论文
共 50 条
  • [41] Simulating Calculation of Frictional Force between Mold and Billet
    Xu Guangming
    Cui Jianzhong
    Na Xinjie
    Journal of Iron and Steel Research(International), 1998, 5 (01) : 13 - 16
  • [42] Three-Dimensional Magnetohydrodynamic Calculation for Coupling Multiphase Flow in Round Billet Continuous Casting Mold With Electromagnetic Stirring
    Yu Haiqi
    Zhu Miaoyong
    IEEE TRANSACTIONS ON MAGNETICS, 2010, 46 (01) : 82 - 86
  • [43] Effects of Mold Powder Chemistry on Shell Growth, Momentum and Heat Transfer in a Billet Mold
    Najera-Bastida, A.
    Morales, R. D.
    Garcia-Demedices, L.
    Zarate-Gutierrez, R.
    Rodriguez-Avila, J.
    STEEL RESEARCH INTERNATIONAL, 2011, 82 (04) : 301 - 312
  • [44] Effect of electromagnetic swirling flow in slide-gate SEN on flow field in square billet continuous casting mold
    Geng, Dianqiao
    Lei, Hong
    He, Jicheng
    Liu, Haitao
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2012, 25 (05) : 347 - 356
  • [45] MOLD LEVEL CONTROLLING SYSTEM USING ELECTROMAGNETIC BRAKE IN SLAB CASTER
    NAGAI, J
    KODAMA, M
    NIRA, M
    MIYAHARA, K
    OGAWA, M
    KUTSUNAI, S
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1983, 23 (12) : B412 - B412
  • [46] Effect of electromagnetic swirling flow in slide-gate SEN on flow field in square billet continuous casting mold
    Dianqiao GENG 1)
    ActaMetallurgicaSinica(EnglishLetters), 2012, 25 (05) : 347 - 356
  • [47] Simulating calculation of frictional force between mold and billet
    Xu, GM
    Cui, JZ
    Na, XJ
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 1998, 5 (01) : 13 - 16
  • [48] Simulation of the flow-heat transfer process in billet mold and analysis of the billet rhomboidity phenomenon
    Wu, Handong
    Chen, Jianguo
    Peng, Zun
    APPLIED THERMAL ENGINEERING, 2020, 173 (173)
  • [49] IMPROVED QUALITY OF CONTINUOUSLY CAST BILLETS WITH ELECTROMAGNETIC STIRRING OF METAL IN THE MOLD
    SHAKHOV, SI
    SHIFRIN, IN
    CHARNYI, AK
    KUZMINA, LI
    KOSTIN, AS
    STEEL IN TRANSLATION, 1993, 23 (04) : 19 - 20
  • [50] Electromagnetic sensor just below CC mold by using magnetic transformation of steel
    Harada, H.
    Nagashima, M.
    Konno, T.
    Yamana, M.
    Toh, T.
    9TH INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC PROCESSING OF MATERIALS (EPM2018), 2018, 424
12345