ELECTROMAGNETIC METAL LEVEL SENSOR IN A BILLET MOLD

被引：0
|
作者：
Terekhin, I. V. [1 ]
Romanov, S. A. [2 ]
Savin, I. S. [1 ]
机构：
[1] NPO Tekhnoap LLC, Lytkarino, Moscow Region, Russia
[2] JSC NLMK Ural, Revda, Sverdlovsk Regi, Russia
来源：
METALLURGIST | 2018年 / 62卷 / 7-8期
关键词：
continuous casting; billet mold; metal level; level control; electromagnetic sensor; radioisotope sensor; built-in sensor;
D O I：
10.1007/s11015-018-0715-x
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A new electromagnetic metal level sensor for a billet mold is considered in comparison with radioisotope level sensor. Comparative characteristics of the sensors in the process of casting with oil were obtained during demonstration testing of electromagnetic sensor at two metallurgical plants. In the process of operation, it was shown that electromagnetic metal level sensor has somewhat better characteristics as compared to radioisotope sensor. Utilization of electromagnetic sensor instead of radioisotope sensor allowed reducing the fluctuations of metal level and withdrawal rate in comparison with stabilization based on the radioisotope sensor at both plants.
引用
收藏
页码：729 / 737
页数：9
相关论文
共 50 条
  • [31] ROUND BILLET CASTING PROCESS .7. A MOLD LEVEL CONTROL BY COORDINATE CONTROL METHOD
    YAMASHITA, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (12): : S931 - S931
  • [32] Development and Application of Mold Fluxes for 420 Billet
    Wang Wen-xue
    Yang La-dao
    Wang Yu
    Yang Chao-wu
    Zeng Jing
    Wang Rong
    Zhou Shi-kai
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2008, 15 : 727 - 731
  • [33] Laser sensor controls mold level for aluminum ingots
    Tatterson, KG
    PHOTONICS SPECTRA, 1997, 31 (11) : 22 - +
  • [34] Optimal Sensor Placement for Mold Level in Continuous Casting
    Gasparini, Luca
    Marko, Lukas
    Landauer, Julian
    Kugi, Andreas
    Fuchshumer, Stefan
    Steinboeck, Andreas
    IFAC PAPERSONLINE, 2024, 58 (22): : 107 - 112
  • [35] Electromagnetic sensor measures water level
    Gronlie, O
    SEA TECHNOLOGY, 2002, 43 (09) : 10 - 13
  • [36] Effects of mold electromagnetic stirring on heat transfer, species transfer and solidification characteristics of continuous casting round billet
    Yao, Cheng
    Wang, Min
    Zhang, Mengyun
    Xing, Lidong
    Zhang, Haibo
    Bao, Yanping
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 19 : 1766 - 1776
  • [37] Thermal physical simulation of meniscus behaviors of molten steel in the soft contact electromagnetic continuous casting mold of billet
    Yu, Guangwei
    Jia, Guanglin
    Wang, Engang
    Li, Benwen
    He, Jicheng
    Jinshu Xuebao/Acta Metallurgica Sinica, 2000, 36 (12): : 1253 - 1257
  • [38] MODELLING OF FILLING A MOLD WITH MOLTEN METAL IN THE PRESENCE OF AN ELECTROMAGNETIC FIELD
    Barglik, J.
    Golak, S.
    MAGNETOHYDRODYNAMICS, 2015, 51 (01): : 5 - 14
  • [39] Rotational speed of liquid metal in the mold with synchronous electromagnetic stirrer
    Vishtak, T.V.
    Karlov, O.M.
    Kondratenko, I.P.
    Rashchepkin, A.P.
    1600, Institute of Electrodynamics, National Academy of Sciences of Ukraine : 67 - 72
  • [40] Level sensor is on its metal
    不详
    MATERIALS WORLD, 2005, 13 (02) : 12 - 12
12345