ELECTROMAGNETIC METAL LEVEL SENSOR IN A BILLET MOLD

被引：0
|
作者：
Terekhin, I. V. [1 ]
Romanov, S. A. [2 ]
Savin, I. S. [1 ]
机构：
[1] NPO Tekhnoap LLC, Lytkarino, Moscow Region, Russia
[2] JSC NLMK Ural, Revda, Sverdlovsk Regi, Russia
来源：
METALLURGIST | 2018年 / 62卷 / 7-8期
关键词：
continuous casting; billet mold; metal level; level control; electromagnetic sensor; radioisotope sensor; built-in sensor;
D O I：
10.1007/s11015-018-0715-x
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A new electromagnetic metal level sensor for a billet mold is considered in comparison with radioisotope level sensor. Comparative characteristics of the sensors in the process of casting with oil were obtained during demonstration testing of electromagnetic sensor at two metallurgical plants. In the process of operation, it was shown that electromagnetic metal level sensor has somewhat better characteristics as compared to radioisotope sensor. Utilization of electromagnetic sensor instead of radioisotope sensor allowed reducing the fluctuations of metal level and withdrawal rate in comparison with stabilization based on the radioisotope sensor at both plants.
引用
收藏
页码：729 / 737
页数：9
相关论文
共 50 条
  • [11] Level meter for the electromagnetic continuous casting of steel billet
    Kim, G
    Kim, H
    Oh, K
    Park, J
    Jeong, H
    Lee, EW
    ISIJ INTERNATIONAL, 2003, 43 (02) : 224 - 229
  • [12] Numerical Simulation of Flow, Heat, Solidification, Solute Transfer and Electromagnetic Field for Vertical Mold and Curved Mold of Billet
    Li, Yaoguang
    Sun, Yanhui
    Bai, Xuesong
    ISIJ INTERNATIONAL, 2021, 61 (03) : 802 - 813
  • [13] STUDY OF FLUID FLOW AND SOLIDIFICATION IN BILLET CASTER CONTINUOUS CASTING MOLD WITH ELECTROMAGNETIC STIRRING
    Maurya, A.
    Jha, P. Kumar
    ARCHIVES OF METALLURGY AND MATERIALS, 2018, 63 (01) : 413 - 424
  • [14] A novel approach to predict the inclusion removal in a billet caster mold with the use of electromagnetic stirrer
    Gupta, Vipul Kumar
    Jha, Pradeep Kumar
    Jain, Pramod Kumar
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 83 : 27 - 39
  • [15] Numerical simulation of the flow, solidification, and solute transport in a billet mold under electromagnetic stirring
    Li, Yaoguang
    Sun, Yanhui
    Bai, Xuesong
    METALLURGICAL RESEARCH & TECHNOLOGY, 2021, 118 (02)
  • [16] Meniscus Behavior in Electromagnetic Soft-Contact Continuous Casting Round Billet Mold
    DENG An-yuan
    JournalofIronandSteelResearch(International), 2006, (04) : 13 - 16
  • [17] Meniscus behavior in electromagnetic soft-contact continuous casting round billet mold
    Deng An-yuan
    Wang En-gang
    He Ji-Cheng
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2006, 13 (04) : 13 - 16
  • [18] Meniscus Behavior in Electromagnetic Soft-Contact Continuous Casting Round Billet Mold
    An-yuan Deng
    En-gang Wang
    Ji-cheng He
    Journal of Iron and Steel Research International, 2006, 13 : 13 - 16
  • [19] Numerical investigation into flow and solidification behavior of billet continuous casting with and without mold electromagnetic stirring
    Gupta, Vipul Kumar
    Jha, Pradeep Kumar
    Jain, Pramod Kumar
    HEAT TRANSFER, 2022, 51 (01) : 909 - 928
  • [20] Modeling of Solidification in Continuous Casting Round Billet with Mold Electromagnetic Stirring (M-EMS)
    Trindade, Leonardo B.
    Nadalon, Jose Ernesto A.
    Contini, Andre C.
    Barroso, Rodrigo C.
    STEEL RESEARCH INTERNATIONAL, 2017, 88 (04)
12345