ELECTROMAGNETIC METAL LEVEL SENSOR IN A BILLET MOLD

被引：0
|
作者：
Terekhin, I. V. [1 ]
Romanov, S. A. [2 ]
Savin, I. S. [1 ]
机构：
[1] NPO Tekhnoap LLC, Lytkarino, Moscow Region, Russia
[2] JSC NLMK Ural, Revda, Sverdlovsk Regi, Russia
来源：
METALLURGIST | 2018年 / 62卷 / 7-8期
关键词：
continuous casting; billet mold; metal level; level control; electromagnetic sensor; radioisotope sensor; built-in sensor;
D O I：
10.1007/s11015-018-0715-x
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A new electromagnetic metal level sensor for a billet mold is considered in comparison with radioisotope level sensor. Comparative characteristics of the sensors in the process of casting with oil were obtained during demonstration testing of electromagnetic sensor at two metallurgical plants. In the process of operation, it was shown that electromagnetic metal level sensor has somewhat better characteristics as compared to radioisotope sensor. Utilization of electromagnetic sensor instead of radioisotope sensor allowed reducing the fluctuations of metal level and withdrawal rate in comparison with stabilization based on the radioisotope sensor at both plants.
引用
收藏
页码：729 / 737
页数：9
相关论文
共 50 条
  • [21] Flow and Solidification in Billet Continuous Casting Machine with Dual Electromagnetic Stirrings of Mold and the Final Solidification
    Jiang, Dongbin
    Zhu, Miaoyong
    STEEL RESEARCH INTERNATIONAL, 2015, 86 (09) : 993 - 1003
  • [22] SOLIDIFICATION IN THE MOLD OF A CONTINUOUS BILLET CASTER
    RAMAPRASAD, B
    BRIMACOMBE, JK
    SAMARASEKERA, IV
    JOURNAL OF METALS, 1983, 35 (12): : 123 - 123
  • [23] ROUND BILLET CASTING PROCESS .10. MOLD DEFORMATION AND MOLD MEASURING SYSTEM OF ROUND BILLET CASTER
    YAMAMOTO, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1014 - 1014
  • [24] DIMENSIONAL INTEGRITY OF THE BILLET MOLD TUBE
    OLEARY, KE
    HEYER, KW
    46TH ELECTRIC FURNACE CONFERENCE PROCEEDINGS, 1989, : 237 - 245
  • [25] SOLIDIFICATION IN THE MOLD OF A CONTINUOUS BILLET CASTER
    RAMAPRASAD, B
    BRIMACOMBE, JK
    SAMARASEKERA, IV
    CIM BULLETIN, 1984, 77 (866): : 41 - 41
  • [26] DIMENSIONAL INTEGRITY OF THE BILLET MOLD TUBE
    OLEARY, KE
    CIM BULLETIN, 1988, 81 (914): : 68 - 68
  • [27] WAVE Mold for Billet Casting Applications
    Bakshi, Ian A.
    Garcia, Martin
    Lorento, Don P.
    AISTECH 2013: PROCEEDINGS OF THE IRON & STEEL TECHNOLOGY CONFERENCE, VOLS I AND II, 2013, : 1365 - 1372
  • [28] Design Optimization and Measurement Uncertainty of an Electromagnetic Level Sensor for Liquid Metal Reactors
    Kent, Edward
    Dicenzo II, Duane
    Cameron, Brady
    Ban, Heng
    Grandy, Christopher
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2024, 73
  • [29] Design Optimization and Measurement Uncertainty of an Electromagnetic Level Sensor for Liquid Metal Reactors
    Kent, Edward
    Dicenzo, Duane
    Cameron, Brady
    Ban, Heng
    Grandy, Christopher
    IEEE Transactions on Instrumentation and Measurement, 2024, 73 : 1 - 10
  • [30] Heat transfer analysis of round billet mold during electromagnetic soft-contacting continuous casting
    Key Laboratory for Electromagnetic Processing of Materials, Northeastern University, Shenyang 110004, China
    Dongbei Daxue Xuebao, 2007, 6 (813-816):
12345