ELECTROMAGNETIC METAL LEVEL SENSOR IN A BILLET MOLD

被引：0
|
作者：
Terekhin, I. V. [1 ]
Romanov, S. A. [2 ]
Savin, I. S. [1 ]
机构：
[1] NPO Tekhnoap LLC, Lytkarino, Moscow Region, Russia
[2] JSC NLMK Ural, Revda, Sverdlovsk Regi, Russia
来源：
METALLURGIST | 2018年 / 62卷 / 7-8期
关键词：
continuous casting; billet mold; metal level; level control; electromagnetic sensor; radioisotope sensor; built-in sensor;
D O I：
10.1007/s11015-018-0715-x
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A new electromagnetic metal level sensor for a billet mold is considered in comparison with radioisotope level sensor. Comparative characteristics of the sensors in the process of casting with oil were obtained during demonstration testing of electromagnetic sensor at two metallurgical plants. In the process of operation, it was shown that electromagnetic metal level sensor has somewhat better characteristics as compared to radioisotope sensor. Utilization of electromagnetic sensor instead of radioisotope sensor allowed reducing the fluctuations of metal level and withdrawal rate in comparison with stabilization based on the radioisotope sensor at both plants.
引用
收藏
页码：729 / 737
页数：9
相关论文
共 50 条
  • [1] Electromagnetic Metal Level Sensor in a Billet Mold
    I. V. Terekhin
    S. A. Romanov
    I. S. Savin
    Metallurgist, 2018, 62 : 729 - 737
  • [2] Numerical simulation of electromagnetic brake in the billet mold
    Huang, Juntao
    He, Jicheng
    Dongbei Daxue Xuebao/Journal of Northeastern University, 1999, 20 (06): : 622 - 625
  • [3] Numerical simulation of steel solidification and electromagnetic brake in the billet mold
    Huang, JT
    He, JC
    ACTA METALLURGICA SINICA, 2001, 37 (03) : 281 - 286
  • [4] Application of mold electromagnetic stirring in continuous casting of middle billet
    Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China
    不详
    不详
    Beijing Keji Daxue Xuebao, 2007, SUPPL. 1 (142-145):
  • [5] Effect of Mold Electromagnetic Stirring on Metallurgical Behavior in Ultrahigh Speed Continuous Casting Billet Mold
    Li, Xintao
    Zhang, Zhaohui
    Lv, Ming
    Fang, Ming
    Ma, Shaobo
    Li, Donglin
    Xi, Xiaofeng
    STEEL RESEARCH INTERNATIONAL, 2023, 94 (06)
  • [6] ELECTROMAGNETIC DEVICE FOR CONTROLLING METAL LEVEL IN CONTINUOUS-CASTING MOLD
    LIESCH, J
    ANGEL, L
    REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1981, 78 (11): : E169 - E169
  • [7] THE TECHNIQUE OF ELECTROMAGNETIC STIRRING OF CC BILLET .1. IMPROVEMENT OF SURFACE QUALITY OF CONTINUOUSLY CAST BILLET BY IN-MOLD ELECTROMAGNETIC STIRRING
    AYATA, K
    FUJIMOTO, T
    MORI, T
    WAKASUGI, I
    KOJIMA, S
    UEOKA, T
    KATO, S
    DOTANI, S
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1983, 23 (12) : B410 - B410
  • [8] Shield for Improving Wavy Meniscus in the Billet Continuous Casting Mold with Electromagnetic Stirring
    Cho, Myung Jong
    Park, Eun Byung
    Kim, Sang Won
    ISIJ INTERNATIONAL, 2010, 50 (08) : 1180 - 1184
  • [9] Effect of electromagnetic stirring in mold on the macroscopic quality of high carbon steel billet
    Yu, Haiqi
    Zhu, Miaoyong
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2009, 22 (06) : 461 - 467
  • [10] Effect of electromagnetic stirring in mold on the macroscopic quality of high carbon steel billet
    Haiqi YU and Miaoyong ZHU School of Materials and Metallurgy
    Acta Metallurgica Sinica(English Letters), 2009, 22 (06) : 461 - 467
12345