Evolution of Voids in Mg/Al Diffusion Bonding Process

被引：7
|
作者：
Long, Luping [1 ]
Liu, Wensheng [1 ]
Ma, Yunzhu [1 ]
Wu, Lei [1 ]
Tang, Siwei [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
来源：
HIGH TEMPERATURE MATERIALS AND PROCESSES | 2017年 / 36卷 / 10期
基金：
国家高技术研究发展计划(863计划);
关键词：
diffusion bonding; void behaviors; plastic deformation; stresses; diffusion; MAGNESIUM; ALLOYS; MG; AL; MICROSTRUCTURE; JOINTS;
D O I：
10.1515/htmp-2016-0024
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The closure process of voids was very crucial for diffusion bonding, voids behaviors in Mg/Al bonding process were investigated, and the control mechanisms of diffusion at different predominant process parameters were discussed in this paper. Finite element simulation was utilized to investigate the influence of thermal residual stresses on the appearance of secondary voids. The results showed that: the dominant mechanism of void closure was plastic deformation in the initial stage of Mg/Al diffusion bonding. Numerical results indicated that secondary voids could be easily generated in the regions where tensile residual stress gradient achieves the maximum, corresponding to area that Al3Mg2 layer at the nearby Al/Al3Mg2 interface, the segregation of voids deteriorated the performances of the bonded joints.
引用
收藏
页码：985 / 992
页数：8
相关论文
共 50 条
  • [41] The evolution of microstructures and mechanical properties during accumulative roll bonding of Al/Mg composite
    Chen, M. C.
    Hsieh, H. C.
    Wu, Weite
    JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 416 (1-2) : 169 - 172
  • [42] Texture evolution of the Mg/Al laminated composite by accumulative roll bonding at ambient temperature
    National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 100083, China
    不详
    不详
    不详
    Chang, H. (hchang@ustb.edu.cn), 1600, Science Press (42):
  • [43] The evolution of microstructures and mechanical properties during accumulative roll bonding of Al/Mg composite
    Chen, M.C.
    Hsieh, H.C.
    Wu, Weite
    Journal of Alloys and Compounds, 2006, 416 (1-2): : 169 - 172
  • [44] The role of vacuum degree in the bonding of Al/Mg bimetal prepared by a compound casting process
    Li, Guangyu
    Yang, Wenchao
    Jiang, Wenming
    Guan, Feng
    Jiang, Haixiao
    Wu, Yao
    Fan, Zitian
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 265 : 112 - 121
  • [45] A novel weld-bonding hybrid process for joining Mg alloy and Al alloy
    Liu, Liming
    Ren, Daxin
    MATERIALS & DESIGN, 2011, 32 (07) : 3730 - 3735
  • [46] Diffusion Bonding of ZrB2 Ceramic and Al-Sn-Mg Alloys at Atmosphere
    Pan, Houhong
    Iijima, Keigo
    Liu, Yongjun
    Itoh, Isao
    MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 3249 - +
  • [47] BALLISTIC LIMITS OF AL-6-PERCENT-MG ALLOY PLATES LAMINATED BY DIFFUSION BONDING
    MILEIKO, ST
    SARKISSYAN, OA
    KONDAKOV, SF
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 1994, 21 (01) : 9 - 16
  • [48] Effect of CuNi Interlayer on Microstructure and Mechanical Property of Mg/Al Joints Welded by Diffusion Bonding
    Zhang Jian
    Luo Guoqiang
    Shen Qiang
    Zhang Lianmeng
    Huang Zhijun
    RARE METAL MATERIALS AND ENGINEERING, 2015, 44 (06) : 1413 - 1417
  • [49] Diffusion and formation of intermetallic compounds during accumulative roll-bonding of Al/Mg alloys
    Chen, Ming-Che
    Kuo, Che-Wei
    Chang, Chia-Ming
    Hsieh, Chih-Chun
    Chang, Yin-Yu
    Wu, Weite
    MATERIALS TRANSACTIONS, 2007, 48 (10) : 2595 - 2598
  • [50] Effect of CuNi interlayer on microstructure and mechanical property of Mg/Al joints welded by diffusion bonding
    Zhang, Jian
    Luo, Guoqiang
    Shen, Qiang
    Zhang, Lianmeng
    Huang, Zhijun
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2015, 44 (06): : 1413 - 1417
12345