Evolution of Voids in Mg/Al Diffusion Bonding Process

被引：7
|
作者：
Long, Luping [1 ]
Liu, Wensheng [1 ]
Ma, Yunzhu [1 ]
Wu, Lei [1 ]
Tang, Siwei [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
来源：
HIGH TEMPERATURE MATERIALS AND PROCESSES | 2017年 / 36卷 / 10期
基金：
国家高技术研究发展计划(863计划);
关键词：
diffusion bonding; void behaviors; plastic deformation; stresses; diffusion; MAGNESIUM; ALLOYS; MG; AL; MICROSTRUCTURE; JOINTS;
D O I：
10.1515/htmp-2016-0024
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The closure process of voids was very crucial for diffusion bonding, voids behaviors in Mg/Al bonding process were investigated, and the control mechanisms of diffusion at different predominant process parameters were discussed in this paper. Finite element simulation was utilized to investigate the influence of thermal residual stresses on the appearance of secondary voids. The results showed that: the dominant mechanism of void closure was plastic deformation in the initial stage of Mg/Al diffusion bonding. Numerical results indicated that secondary voids could be easily generated in the regions where tensile residual stress gradient achieves the maximum, corresponding to area that Al3Mg2 layer at the nearby Al/Al3Mg2 interface, the segregation of voids deteriorated the performances of the bonded joints.
引用
收藏
页码：985 / 992
页数：8
相关论文
共 50 条
  • [11] Microstructure and phase constituents in the interface zone of Mg/Al diffusion bonding
    Peng Liu
    Yajiang Li
    Juan Wang
    Haijun MA
    Guolin Guo
    Haoran Geng
    Metallurgical and Materials Transactions B, 2006, 37 : 649 - 654
  • [12] Structure and forming process of the Ti/Al diffusion bonding joints
    Yao Wei
    Wu Aiping
    Zou Guisheng
    Ren Halie
    RARE METAL MATERIALS AND ENGINEERING, 2007, 36 (04) : 700 - 704
  • [13] Structure and forming process of the Ti/Al diffusion bonding joints
    Yao, Wei
    Wu, Aiping
    Zou, Guisheng
    Ren, Jialie
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2007, 36 (04): : 700 - 704
  • [14] The voids kinetics during diffusion process
    Wierzba, B.
    Skibinski, W.
    Wedrychowicz, S.
    Wierzba, P.
    PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS, 2015, 433 : 268 - 273
  • [15] An investigation on microstructural evolution and mechanical properties of Zn coating as interlayer on Mg-Al alloys using diffusion bonding
    Nimal, R. J. Golden Renjith
    Chenthil, M.
    Sangamaeswaran, R.
    Hariharan, R.
    Esakkimuthu, G.
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 3512 - 3516
  • [16] Microstructure evolution of Al/Mg/Al laminates in deep drawing process
    Nie, Huihui
    Chi, Chengzhong
    Chen, Hongsheng
    Li, Xianrong
    Liang, Wei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (06): : 5325 - 5335
  • [17] The influence of adhesive on the Al alloy in laser weld bonding Mg-Al process
    Wang, H. Y.
    Liu, L. M.
    Jia, Z. Y.
    JOURNAL OF MATERIALS SCIENCE, 2011, 46 (16) : 5534 - 5540
  • [18] Diffusion bonding of Al 7075 and Mg AZ31 alloys: Process parameters, microstructural analysis and mechanical properties
    Seyyed Afghahi, Seyyed Salman
    Jafarian, Mojtaba
    Paidar, Moslem
    Jafarian, Morteza
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016, 26 (07) : 1843 - 1851
  • [19] Discussion of “Microstructure and Phase Constituents in the Interface Zone of Mg/Al Diffusion Bonding”⋆
    J.R. CAHOON
    Metallurgical and Materials Transactions B, 2007, 38 : 109 - 112
  • [20] Formation of intermetallic compounds in Mg–Ag–Al joints during diffusion bonding
    Yiyu Wang
    Guoqiang Luo
    Leijun Li
    Qiang Shen
    Lianmeng Zhang
    Journal of Materials Science, 2014, 49 : 7298 - 7308
12345