Evolution of Voids in Mg/Al Diffusion Bonding Process

被引：7
|
作者：
Long, Luping [1 ]
Liu, Wensheng [1 ]
Ma, Yunzhu [1 ]
Wu, Lei [1 ]
Tang, Siwei [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
来源：
HIGH TEMPERATURE MATERIALS AND PROCESSES | 2017年 / 36卷 / 10期
基金：
国家高技术研究发展计划(863计划);
关键词：
diffusion bonding; void behaviors; plastic deformation; stresses; diffusion; MAGNESIUM; ALLOYS; MG; AL; MICROSTRUCTURE; JOINTS;
D O I：
10.1515/htmp-2016-0024
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The closure process of voids was very crucial for diffusion bonding, voids behaviors in Mg/Al bonding process were investigated, and the control mechanisms of diffusion at different predominant process parameters were discussed in this paper. Finite element simulation was utilized to investigate the influence of thermal residual stresses on the appearance of secondary voids. The results showed that: the dominant mechanism of void closure was plastic deformation in the initial stage of Mg/Al diffusion bonding. Numerical results indicated that secondary voids could be easily generated in the regions where tensile residual stress gradient achieves the maximum, corresponding to area that Al3Mg2 layer at the nearby Al/Al3Mg2 interface, the segregation of voids deteriorated the performances of the bonded joints.
引用
收藏
页码：985 / 992
页数：8
相关论文
共 50 条
  • [31] Fabrication of Mg/AL multilayer plates using an accumulative extrusion bonding process
    Xin, Yunchang
    Hong, Rui
    Feng, Bo
    Yu, Huihui
    Wu, Yang
    Liu, Qing
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 640 : 210 - 216
  • [32] Production of Al/Mg-Li composite by the accumulative roll bonding process
    Rahmatabadi, Davood
    Pahlavani, Mostafa
    Gholami, Mohammad Delshad
    Marzbanrad, Javad
    Hashemi, Ramin
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (04): : 7880 - 7886
  • [33] XRD and SEM analysis near the diffusion bonding interface of Mg/Al dissimilar materials
    Li, Yajiang
    Liu, Peng
    Wang, Juan
    Ma, Haijun
    VACUUM, 2007, 82 (01) : 15 - 19
  • [34] Formation of intermetallic compounds in Mg-Ag-Al joints during diffusion bonding
    Wang, Yiyu
    Luo, Guoqiang
    Li, Leijun
    Shen, Qiang
    Zhang, Lianmeng
    JOURNAL OF MATERIALS SCIENCE, 2014, 49 (20) : 7298 - 7308
  • [35] Effect of Sn Alloying on the Diffusion Bonding Behavior of Al-Mg-Si Alloys
    Atabay, Sila Ece
    Esen, Ziya
    Dericioglu, Arcan F.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (07): : 3181 - 3187
  • [36] Effect of Sn Alloying on the Diffusion Bonding Behavior of Al-Mg-Si Alloys
    Sıla Ece Atabay
    Ziya Esen
    Arcan F. Dericioglu
    Metallurgical and Materials Transactions A, 2017, 48 : 3181 - 3187
  • [37] A Comprehensive Study of Diffusion Bonding of Mg AZ31 to Al 5754, Al 6061 and Al 7039 Alloys
    Jafarian, Mojtaba
    Rizi, Mohsen Saboktakin
    Jafarian, Morteza
    Zare, Hossein
    Javadinejad, Hamid Reza
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (12) : 3011 - 3020
  • [38] A Comprehensive Study of Diffusion Bonding of Mg AZ31 to Al 5754, Al 6061 and Al 7039 Alloys
    Mojtaba Jafarian
    Mohsen Saboktakin Rizi
    Morteza Jafarian
    Hossein Zare
    Hamid Reza Javadinejad
    Transactions of the Indian Institute of Metals, 2018, 71 : 3011 - 3020
  • [39] Microstructural, Mechanical And Metallurgical Analysis of Al Interlayer Coating On Mg-Al Alloy Using Diffusion Bonding
    Nimal, R. J. Golden Renjith
    Sivakumar, M.
    Raj, S. Gokul
    Vendan, S. Arungalai
    Esakkimuthu, G.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 5886 - 5890
  • [40] Texture Evolution of the Mg/Al Laminated Composite by Accumulative Roll Bonding at Ambient Temperature
    Chang Hai
    Zheng Mingyi
    Gan Weimin
    Xu Chao
    Brokmeier, H. G.
    RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (03) : 441 - 446
12345