Evolution of Voids in Mg/Al Diffusion Bonding Process

被引：7
|
作者：
Long, Luping [1 ]
Liu, Wensheng [1 ]
Ma, Yunzhu [1 ]
Wu, Lei [1 ]
Tang, Siwei [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
来源：
HIGH TEMPERATURE MATERIALS AND PROCESSES | 2017年 / 36卷 / 10期
基金：
国家高技术研究发展计划(863计划);
关键词：
diffusion bonding; void behaviors; plastic deformation; stresses; diffusion; MAGNESIUM; ALLOYS; MG; AL; MICROSTRUCTURE; JOINTS;
D O I：
10.1515/htmp-2016-0024
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The closure process of voids was very crucial for diffusion bonding, voids behaviors in Mg/Al bonding process were investigated, and the control mechanisms of diffusion at different predominant process parameters were discussed in this paper. Finite element simulation was utilized to investigate the influence of thermal residual stresses on the appearance of secondary voids. The results showed that: the dominant mechanism of void closure was plastic deformation in the initial stage of Mg/Al diffusion bonding. Numerical results indicated that secondary voids could be easily generated in the regions where tensile residual stress gradient achieves the maximum, corresponding to area that Al3Mg2 layer at the nearby Al/Al3Mg2 interface, the segregation of voids deteriorated the performances of the bonded joints.
引用
收藏
页码：985 / 992
页数：8
相关论文
共 50 条
  • [21] A study of phase constitution near the interface of Mg/Al vacuum diffusion bonding
    Liu, P
    Li, YJ
    Geng, HR
    Wang, J
    MATERIALS LETTERS, 2005, 59 (16) : 2001 - 2005
  • [22] Discussion of "Microstructure and phase constituents in the interface zone of Mg/Al diffusion bonding"
    Cahoon, J. R.
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2007, 38 (01): : 109 - 112
  • [23] Diffusion bonding process
    Ikeshoji T.-T.
    Maeda M.
    Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2011, 80 (05): : 79 - 81
  • [24] Recrystallization behavior and texture evolution on extrusion connection process of Mg/Al alloys thickness-oriented bonding sheet
    Du, Hua Qiu
    Li, Feng
    Gao, Lei
    Li, Chao
    Chen, Zi Yu
    Materials Today Communications, 2022, 33
  • [25] Recrystallization behavior and texture evolution on extrusion connection process of Mg/Al alloys thickness-oriented bonding sheet
    Du, Hua Qiu
    Li, Feng
    Gao, Lei
    Li, Chao
    Chen, Zi Yu
    MATERIALS TODAY COMMUNICATIONS, 2022, 33
  • [26] Optimization of process parameter of diffusion bonding of Ti -Al and Ti -Cu
    Chandrappa, K.
    Kant, Rishi
    Ali, Rashid
    Vineth, K.
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 1689 - 1695
  • [27] Texture evolution of the Mg/Al laminated composite fabricated by the accumulative roll bonding
    Chang, H.
    Zheng, M. Y.
    Gan, W. M.
    Wu, K.
    Maawad, E.
    Brokmeier, H. G.
    SCRIPTA MATERIALIA, 2009, 61 (07) : 717 - 720
  • [28] Microstructure evolution and mechanical properties of Mg/Al diffusion bonded joints
    Liu, Wensheng
    Long, Luping
    Ma, Yunzhu
    Wu, Lei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 643 : 34 - 39
  • [29] Interfacial voids and microstructure evolution, bonding behavior and deformation mechanism of TC4 diffusion bonded joints
    Peng, Yu
    Li, Jinglong
    Li, Zhaoxi
    Li, Shiwei
    Guo, Wei
    Gao, Xiangyu
    Xiong, Jiangtao
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 81 : 837 - 851
  • [30] Kinetics of voids evolution during diffusion bonding of dissimilar metals on consideration of the realistic surface morphology: Modeling and experiments
    Chang, Ruijiang
    Guo, Qianying
    Ma, Zongqing
    Ding, Ran
    Liu, Chenxi
    Liu, Yongchang
    ACTA MATERIALIA, 2024, 276
12345