Evolution of Voids in Mg/Al Diffusion Bonding Process

被引：7
|
作者：
Long, Luping [1 ]
Liu, Wensheng [1 ]
Ma, Yunzhu [1 ]
Wu, Lei [1 ]
Tang, Siwei [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
来源：
HIGH TEMPERATURE MATERIALS AND PROCESSES | 2017年 / 36卷 / 10期
基金：
国家高技术研究发展计划(863计划);
关键词：
diffusion bonding; void behaviors; plastic deformation; stresses; diffusion; MAGNESIUM; ALLOYS; MG; AL; MICROSTRUCTURE; JOINTS;
D O I：
10.1515/htmp-2016-0024
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The closure process of voids was very crucial for diffusion bonding, voids behaviors in Mg/Al bonding process were investigated, and the control mechanisms of diffusion at different predominant process parameters were discussed in this paper. Finite element simulation was utilized to investigate the influence of thermal residual stresses on the appearance of secondary voids. The results showed that: the dominant mechanism of void closure was plastic deformation in the initial stage of Mg/Al diffusion bonding. Numerical results indicated that secondary voids could be easily generated in the regions where tensile residual stress gradient achieves the maximum, corresponding to area that Al3Mg2 layer at the nearby Al/Al3Mg2 interface, the segregation of voids deteriorated the performances of the bonded joints.
引用
收藏
页码：985 / 992
页数：8
相关论文
共 50 条
  • [1] Modelling of Voids Closure in the Diffusion Bonding Process
    Alegria, J.
    Miranda, R. M.
    de Salazar, J. M. Gomez
    Fernandes, A. A.
    ADVANCED MATERIALS FORUM IV, 2008, 587-588 : 731 - +
  • [2] Sequential Process of Diffusion Bonding and Annealing on Dissimilar Welding of Mg/Al Alloys
    Ding, Yunlong
    Zhang, Shixue
    Wu, Bi
    Hao, Jinshuang
    Chen, Yan
    Ju, Dongying
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021
  • [3] Formation process of the bonding joint in Ti/Al diffusion bonding
    Yao Wei
    Wu Aiping
    Zou Guisheng
    Ren Halie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 480 (1-2): : 456 - 463
  • [4] Diffusion bonding of Mg/Al alloy with Zn interlayer metal
    Zhao, Limin
    Liu, Liming
    Xu, Rongzheng
    Zhang, Zhaodong
    Hanjie Xuebao/Transactions of the China Welding Institution, 2007, 28 (10): : 9 - 12
  • [5] Analyzing the Effect of Diffusion Bonding Process Parameters on Bond Characteristics of Mg-Al Dissimilar Joints
    Mahendran, G.
    Babu, S.
    Balasubramanian, V.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2010, 19 (05) : 657 - 665
  • [6] Analyzing the Effect of Diffusion Bonding Process Parameters on Bond Characteristics of Mg-Al Dissimilar Joints
    G. Mahendran
    S. Babu
    V. Balasubramanian
    Journal of Materials Engineering and Performance, 2010, 19 : 657 - 665
  • [7] The influence of adhesive on the Al alloy in laser weld bonding Mg–Al process
    H. Y. Wang
    L. M. Liu
    Z. Y. Jia
    Journal of Materials Science, 2011, 46 : 5534 - 5540
  • [8] Microstructure and phase constituents in the interface zone of Mg/Al diffusion bonding
    Liu, Peng
    Li, Yajiang
    Geng, Haoran
    Wang, Juan
    Ma, Haijun
    Guo, Guolin
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2006, 37 (04): : 649 - 654
  • [9] Superplastic forming and diffusion bonding of Al-6Mg alloy
    Zhang, Jie
    Niu, Jitai
    Zhang, Baoyou
    Zhou, Youlong
    Hanjie Xuebao/Transactions of the China Welding Institution, 1996, 17 (04): : 219 - 223
  • [10] Microstructure and XRD analysis in the interface zone of Mg/Al diffusion bonding
    Wang Juan
    Li Yajiang
    Liu Peng
    Geng Haoran
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 205 (1-3) : 146 - 150
12345