Review of Research Progress in Laser-based Hybrid Machining of Hard and Brittle Materials

被引：0
|
作者：
Wen Q. [1 ,2 ]
Yang Y. [1 ,2 ]
Huang H. [1 ,2 ]
Huang G. [1 ,2 ]
Hu Z. [1 ,2 ]
Chen J. [1 ,2 ]
Wang H. [1 ,2 ]
Wu X. [2 ,3 ]
机构：
[1] Institute of Manufacturing Engineering, Huaqiao University, Xiamen
[2] State Key Laboratory of High Performance Tools, Huaqiao University, Xiamen
[3] School of Electromechanical and Automation, Huaqiao University, Xiamen
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 09期
关键词：
hard brittle materials; laser-based hybrid machining; microstructures; processing efficiency; processing quality;
D O I：
10.3901/JME.2024.09.168
中图分类号：
学科分类号：
摘要：
Hard and brittle materials such as glass, semiconductor, sapphire, ceramics and hard alloy are widely used in construction industry, biomedicine, aerospace, integrated circuits, new energy, photoelectric display, rail transit, ocean and other fields. However, their high hardness, brittleness, wear resistance and corrosion resistance also bring great challenges to their processing. At present, mechanical machining, ion beam etching, chemical etching, and laser machining are the main methods for machining hard and brittle materials. However, these processing methods still face the bottleneck problem that processing efficiency and processing quality cannot be achieved simultaneously. To overcome the problems mentioned above, researchers have proposed a hybrid processing method that combines laser processing and other processing methods. This study outlines the mainstream methods of laser-based hybrid processing of hard and brittle materials, including laser-assisted other methods processing, other methods-assisted laser processing, and laser assisted laser processing. The processing principle, research status, and processing results evaluation of these laser-based hybrid machining technologies are highlighted. The advantages, limitations, and applications of different laser-based hybrid machining methods are summarized. Finally, the future development trend of laser laser-based hybrid machining of hard brittle materials is presented. © 2024 Chinese Mechanical Engineering Society. All rights reserved.
引用
收藏
页码：168 / 188
页数：20
相关论文
共 138 条
  • [71] NAKASHIMA S, SUGIOKA K, ITO T, Et al., Fabrication of high-aspect-ratio nanohole arrays on GaN surface by using wet-chemical-assisted femtosecond laser ablation[J], Journal of Laser Micro Nanoengineering, 6, 1, pp. 15-19, (2011)
  • [72] OU Y，, LI C, QIAN J, Et al., Fabrication of hexagonal microstructure on gallium nitride films by wet etching assisted femtosecond laser ablation[J], Optics Communications, 528, (2023)
  • [73] TOKEL O，, TURNALL A, MAKEY G, Et al., In-chip microstructures and photonic devices fabricated by nonlinear laser lithography deep inside silicon[J], Nature Photonics, 11, 10, pp. 639-645, (2017)
  • [74] RUFFIEUX P，, SCHARF T, PHILIPOUSSIS I, Et al., Two step process for the fabrication of diffraction limited concave microlens arrays[J], Optics Express, 16, 24, pp. 19541-19549, (2008)
  • [75] WU C Y，, CHIANG T H, HSU C C., Fabrication of microlens array diffuser films with controllable haze distribution by combination of breath figures and replica molding methods[J], Optics Express, 16, 24, pp. 19978-19986, (2008)
  • [76] WANG B X, QI J Y, LU Y M, Et al., Rapid fabrication of smooth micro-optical components on glass by etching-assisted femtosecond laser modification[J], Materials, 15, 2, (2022)
  • [77] WANG W, SONG H, LIAO K, Et al., Water-assisted femtosecond laser drilling of 4H-SiC to eliminate cracks and surface material shedding[J], International Journal of Advanced Manufacturing Technology, 112, 1-2, pp. 553-562, (2021)
  • [78] LI Q, YU Y, WANG L, Et al., Sapphire-based fresnel zone plate fabricated by femtosecond laser direct writing and wet etching[J], IEEE Photonics Technology Letters, 28, 12, pp. 1290-1293, (2016)
  • [79] REN Naifei, SONG Jiajia, LI Baojia, Et al., Micro-nano structures ， wettability and antibacterial property on zirconia surfaces by femtosecond laser etching[J], Surface Technology, 51, 9, pp. 359-370, (2022)
  • [80] SUN X, ZHOU F, DONG X, Et al., Fabrication of GaAs micro-optical components using wet etching assisted femtosecond laser ablation[J], Journal of Modern Optics, 67, 20, pp. 1516-1523, (2020)
3456789101112