Review of Research Progress in Laser-based Hybrid Machining of Hard and Brittle Materials

被引：0
|
作者：
Wen Q. [1 ,2 ]
Yang Y. [1 ,2 ]
Huang H. [1 ,2 ]
Huang G. [1 ,2 ]
Hu Z. [1 ,2 ]
Chen J. [1 ,2 ]
Wang H. [1 ,2 ]
Wu X. [2 ,3 ]
机构：
[1] Institute of Manufacturing Engineering, Huaqiao University, Xiamen
[2] State Key Laboratory of High Performance Tools, Huaqiao University, Xiamen
[3] School of Electromechanical and Automation, Huaqiao University, Xiamen
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 09期
关键词：
hard brittle materials; laser-based hybrid machining; microstructures; processing efficiency; processing quality;
D O I：
10.3901/JME.2024.09.168
中图分类号：
学科分类号：
摘要：
Hard and brittle materials such as glass, semiconductor, sapphire, ceramics and hard alloy are widely used in construction industry, biomedicine, aerospace, integrated circuits, new energy, photoelectric display, rail transit, ocean and other fields. However, their high hardness, brittleness, wear resistance and corrosion resistance also bring great challenges to their processing. At present, mechanical machining, ion beam etching, chemical etching, and laser machining are the main methods for machining hard and brittle materials. However, these processing methods still face the bottleneck problem that processing efficiency and processing quality cannot be achieved simultaneously. To overcome the problems mentioned above, researchers have proposed a hybrid processing method that combines laser processing and other processing methods. This study outlines the mainstream methods of laser-based hybrid processing of hard and brittle materials, including laser-assisted other methods processing, other methods-assisted laser processing, and laser assisted laser processing. The processing principle, research status, and processing results evaluation of these laser-based hybrid machining technologies are highlighted. The advantages, limitations, and applications of different laser-based hybrid machining methods are summarized. Finally, the future development trend of laser laser-based hybrid machining of hard brittle materials is presented. © 2024 Chinese Mechanical Engineering Society. All rights reserved.
引用
收藏
页码：168 / 188
页数：20
相关论文
共 138 条
  • [21] ZHAO Y，, KUNIEDA M, ABE K., Study of EDM cutting of single crystal silicon carbide[J], Precision Engineering, 38, 1, pp. 92-99, (2014)
  • [22] FURJES P, FEKETE Z, ILLES L, Et al., Effects of the focused ion beam parameters on nanopore milling in solid state membranes[J], Procedia Engineering, 47, pp. 684-687, (2012)
  • [23] HU X, HUANG Z, ZHOU X, Et al., Wearable large-scale perovskite solar-power source via nanocellular scaffold[J], Advanced Materials, 29, 42, (2017)
  • [24] SRISUAI N, HORPRATHUM M, EIAMCHAI P, Et al., Development of nanohole array patterned by laser interference lithography technique[J], Key Engineering Materials, 675-676, pp. 41-44, (2016)
  • [25] SRINIVASU D S, AXINTE D A, SHIPWAY P H, Et al., Influence of kinematic operating parameters on kerf geometry in abrasive waterjet machining of silicon carbide ceramics[J], International Journal of Machine Tools and Manufacture, 49, 14, pp. 1077-1088, (2009)
  • [26] LI M, HUANG S，, Et al., Ultrathin diamond blades for dicing single crystal SiC developed using a novel bonding method[J], Journal of Manufacturing Processes, 84, pp. 88-99, (2022)
  • [27] YIN L, VANCOILLE E, RAMESH K, Et al., Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining[J], International Journal of Machine Tools and Manufacture, 44, pp. 607-615, (2004)
  • [28] WANG Y, LI L, YANG S, Et al., Optimization of machining parameters of SiC single crystal cut by diamond wire saw[J], MATEC Web of Conferences, 232, (2018)
  • [29] ZHANG Ping, CHEN Guomei, NI Zifeng, Et al., Optimization of chemical mechanical polishing process of SiC based on photo-fenton reaction[J], Surface Technology, 51, 7, pp. 253-262, (2022)
  • [30] MING W, CAO C，, SHEN F，, Et al., Numerical and experimental study on WEDM of BN-AlN-TiB2 composite ceramics based on a fusion FEM model[J], Journal of Manufacturing Processes, 76, pp. 138-154, (2022)
12345678910