Review of Research Progress in Laser-based Hybrid Machining of Hard and Brittle Materials

被引：0
|
作者：
Wen Q. [1 ,2 ]
Yang Y. [1 ,2 ]
Huang H. [1 ,2 ]
Huang G. [1 ,2 ]
Hu Z. [1 ,2 ]
Chen J. [1 ,2 ]
Wang H. [1 ,2 ]
Wu X. [2 ,3 ]
机构：
[1] Institute of Manufacturing Engineering, Huaqiao University, Xiamen
[2] State Key Laboratory of High Performance Tools, Huaqiao University, Xiamen
[3] School of Electromechanical and Automation, Huaqiao University, Xiamen
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 09期
关键词：
hard brittle materials; laser-based hybrid machining; microstructures; processing efficiency; processing quality;
D O I：
10.3901/JME.2024.09.168
中图分类号：
学科分类号：
摘要：
Hard and brittle materials such as glass, semiconductor, sapphire, ceramics and hard alloy are widely used in construction industry, biomedicine, aerospace, integrated circuits, new energy, photoelectric display, rail transit, ocean and other fields. However, their high hardness, brittleness, wear resistance and corrosion resistance also bring great challenges to their processing. At present, mechanical machining, ion beam etching, chemical etching, and laser machining are the main methods for machining hard and brittle materials. However, these processing methods still face the bottleneck problem that processing efficiency and processing quality cannot be achieved simultaneously. To overcome the problems mentioned above, researchers have proposed a hybrid processing method that combines laser processing and other processing methods. This study outlines the mainstream methods of laser-based hybrid processing of hard and brittle materials, including laser-assisted other methods processing, other methods-assisted laser processing, and laser assisted laser processing. The processing principle, research status, and processing results evaluation of these laser-based hybrid machining technologies are highlighted. The advantages, limitations, and applications of different laser-based hybrid machining methods are summarized. Finally, the future development trend of laser laser-based hybrid machining of hard brittle materials is presented. © 2024 Chinese Mechanical Engineering Society. All rights reserved.
引用
收藏
页码：168 / 188
页数：20
相关论文
共 138 条
  • [61] WANG L, HUANG C, WANG J，, Et al., An experimental investigation on laser assisted waterjet micro-milling of silicon nitride ceramics[J], Ceramics International, 44, 5, pp. 5636-5645, (2018)
  • [62] JOUDKAZIS S, NISHIMURA K, MISAWA H, Et al., Control over the crystalline state of sapphire[J], Advanced Materials, 18, 11, pp. 1361-1364, (2006)
  • [63] MENG X, CHEN F, YANG Q, Et al., Simple fabrication of closed-packed IR microlens arrays on silicon by femtosecond laser wet etching[J], Applied Physics A：Materials Science and Processing, 121, 1, pp. 157-162, (2015)
  • [64] LIU Y, WANG Z, Et al., Morphology adjustable microlens array fabricated by single spatially modulated femtosecond pulse[J], Nanophotonics, 11, 3, pp. 571-581, (2022)
  • [65] WANG S, ZHANG F, YANG Q, Et al., Chalcogenide glass IR artificial compound eyes based on femtosecond laser microfabrication[J], Advanced Materials Technologies, 8, 2, (2023)
  • [66] ZHOU W，, LI R, LI M, Et al., Fabrication of microlens array on chalcogenide glass by wet etching-assisted femtosecond laser direct writing[J], Ceramics International, 48, 13, pp. 18983-18988, (2022)
  • [67] HU Y, RAO S, WU S, Et al., All-glass 3D optofluidic microchip with built-in tunable microlens fabricated by femtosecond laser-assisted etching[J], Advanced Optical Materials, 6, 9, (2018)
  • [68] LIANG J, WANG H, HU T, Et al., Mammalian cornea inspired anti-fogging silica glass surface achieved by femtosecond laser[J], Advanced Optical Materials, 11, 7, (2023)
  • [69] TANG S，, BIAN H, YANG Q, Et al., Large-scale high quality glass microlens arrays fabricated by laser enhanced wet etching[J], Optics Express, 22, 23, pp. 29283-29291, (2014)
  • [70] LU Y, DUAN Y, LIU X, Et al., High-quality rapid laser drilling of transparent hard materials[J], Optics Letters, 47, 4, pp. 921-924, (2022)
234567891011