Review of Research Progress in Laser-based Hybrid Machining of Hard and Brittle Materials

被引：0
|
作者：
Wen Q. [1 ,2 ]
Yang Y. [1 ,2 ]
Huang H. [1 ,2 ]
Huang G. [1 ,2 ]
Hu Z. [1 ,2 ]
Chen J. [1 ,2 ]
Wang H. [1 ,2 ]
Wu X. [2 ,3 ]
机构：
[1] Institute of Manufacturing Engineering, Huaqiao University, Xiamen
[2] State Key Laboratory of High Performance Tools, Huaqiao University, Xiamen
[3] School of Electromechanical and Automation, Huaqiao University, Xiamen
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 09期
关键词：
hard brittle materials; laser-based hybrid machining; microstructures; processing efficiency; processing quality;
D O I：
10.3901/JME.2024.09.168
中图分类号：
学科分类号：
摘要：
Hard and brittle materials such as glass, semiconductor, sapphire, ceramics and hard alloy are widely used in construction industry, biomedicine, aerospace, integrated circuits, new energy, photoelectric display, rail transit, ocean and other fields. However, their high hardness, brittleness, wear resistance and corrosion resistance also bring great challenges to their processing. At present, mechanical machining, ion beam etching, chemical etching, and laser machining are the main methods for machining hard and brittle materials. However, these processing methods still face the bottleneck problem that processing efficiency and processing quality cannot be achieved simultaneously. To overcome the problems mentioned above, researchers have proposed a hybrid processing method that combines laser processing and other processing methods. This study outlines the mainstream methods of laser-based hybrid processing of hard and brittle materials, including laser-assisted other methods processing, other methods-assisted laser processing, and laser assisted laser processing. The processing principle, research status, and processing results evaluation of these laser-based hybrid machining technologies are highlighted. The advantages, limitations, and applications of different laser-based hybrid machining methods are summarized. Finally, the future development trend of laser laser-based hybrid machining of hard brittle materials is presented. © 2024 Chinese Mechanical Engineering Society. All rights reserved.
引用
收藏
页码：168 / 188
页数：20
相关论文
共 138 条
  • [81] WANG B, ZHENG J, Et al., Integration of multifocal microlens array on silicon microcantilever via femtosecond-laser-assisted etching technology[J], Micromachines, 13, 2, (2022)
  • [82] LIU X, CHEN Q, GUAN K, Et al., Dry-etching-assisted femtosecond laser machining[J], Laser and Photonics Reviews, 11, 3, (2017)
  • [83] LIU X, YU L, YANG S, Et al., Optical nanofabrication of concave microlens arrays[J], Laser and Photonics Reviews, 13, 5, (2019)
  • [84] LIU X, YANG S, YU L, Et al., Rapid engraving of artificial compound eyes from curved sapphire substrate[J], Advanced Functional Materials, 29, 18, (2019)
  • [85] HUANG Y, TANG F, GUO Z, Et al., Accelerated ICP etching of 6H-SiC by femtosecond laser modification[J], Applied Surface Science, 488, pp. 853-864, (2019)
  • [86] YU L, YANG S，, LIU X, Et al., Ion beam etching assisted femtosecond laser machining to manufacture silicon carbide micro-optical components[J], Acta Photonica Sinica, 47, 12, (2018)
  • [87] WU C, FANG X, Liu F，, Et al., High speed and low roughness micromachining of silicon carbide by plasma etching aided femtosecond laser processing[J], Ceramics International, 46, 11, pp. 17896-17902, (2020)
  • [88] WANG L，, ZHAO Y，, YANG Z，, Et al., Femtosecond laser micromachining in combination with ICP etching for 4H–SiC pressure sensor membranes[J], Ceramics International, 47, 5, pp. 6397-6408, (2021)
  • [89] ZHAO Y，ZZHAOY, WANG L, Et al., Femtosecond laser processing assisted SiC high-temperature pressure sensor fabrication and performance Test[J], Micromachines, 14, 3, (2023)
  • [90] Feng LIU, GUO Xuhong, HAN Yujie, Et al., Study on fabrication method of micro-textures on cemented carbide surface based on ion beam etching-assisted laser[J], Surface Technology, 50, 4, pp. 103-112, (2021)
45678910111213