Ceramics bonding using solder glass frit

被引：0
|
作者：
Z. Sun
D. Pan
J. Wei
C. K. Wong
机构：
[1] Singapore Institute of Manufacturing Technology,
来源：
Journal of Electronic Materials | 2004年 / 33卷
关键词：
Ceramics; bonding; surface treatment; solder glass frit; processing parameters; surface roughness; surface-contact angle;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Ceramics bonding is becoming an important technology and has found wide applications in different engineering and electronic industries. In this paper, furnace bonding of ceramics using solder glass frit was investigated with emphasis on the effects of surface treatment and bonding conditions on bonding strength. Alumina (Al2O3) sheet and SCHOTT solder glass G017-393 were used as the base and brazing filler materials, respectively. Chemical surface treatments using various acids were tested. The results reveal the effects of spreading and voids on bonding strength. An optimum bonding strength can be produced by an appropriate combination of bonded glass-frit density and spreading area. Bonding strength is not only related to surface-contact angle but also surface roughness. The study shows that high-quality ceramics bonding or sealing can be achieved with the application of appropriate bonding conditions.
引用
收藏
页码：1516 / 1523
页数：7
相关论文
共 50 条
  • [1] Ceramics bonding using solder glass frit
    Sun, Z
    Pan, D
    Wei, J
    Wong, CK
    JOURNAL OF ELECTRONIC MATERIALS, 2004, 33 (12) : 1516 - 1523
  • [2] Wafer level encapsulation of microsystems using glass frit bonding
    Knechtel, R
    Wiemer, M
    Frömel, J
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2006, 12 (05): : 468 - 472
  • [3] Reliable vacuum packaging using NanoGetters™ and glass frit bonding
    Sparks, D
    Massoud-Ansari, S
    Najafi, N
    RELIABILITY, TESTING AND CHARACTERIZATION OF MEMS/MOEMS III, 2004, 5343 : 70 - 78
  • [4] Wafer level encapsulation of microsystems using glass frit bonding
    R. Knechtel
    M. Wiemer
    J. Frömel
    Microsystem Technologies, 2006, 12 : 468 - 472
  • [5] Mechanical Strength and Interface Characteristics of Glass-to-Glass Laser Bonding using Glass Frit
    Chen, Zunmiao
    Lai, Yuneng
    Yang, Lianqiao
    Zhang, Jianhua
    2012 13TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP 2012), 2012, : 1609 - 1613
  • [6] Glass-Glass Laser-Assisted Glass Frit Bonding
    Cruz, Rui
    da Cruz Ranita, Joao Alexandre
    Macaira, Jose
    Ribeiro, Fernando
    Batista da Silva, Ana Margarida
    Oliveira, Jose M.
    Fernandes, Maria Helena F. V.
    Ribeiro, Helena Aguilar
    Mendes, Joaquim Gabriel
    Mendes, Adelio
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2012, 2 (12): : 1949 - 1956
  • [7] Coupling Behavior Between Glass Frit and Plate During Laser-Assisted Glass Frit Bonding
    Chen Genyu
    Zhong Peixin
    Cheng Shaoxiang
    CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2021, 48 (18):
  • [8] Wafer-Level Vacuum Packaging for Microsystems Using Glass Frit Bonding
    Wu, Guoqiang
    Xu, Dehui
    Sun, Xiao
    Xiong, Bin
    Wang, Yuelin
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2013, 3 (10): : 1640 - 1646
  • [9] Modelling and Simulation of Glass Frit Bonding of Silicon Wafers
    Yazdi, Seyed Amir Fouad Farshchi
    Garavaglia, Matteo
    Ghisi, Aldo
    Corigliano, Alberto
    2019 20TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2019,
  • [10] Novel thermoplastic bonding using a bulk metallic glass solder
    Suh, Jin-Yoo
    Lohwongwatana, Boonrat
    Garland, Carol M.
    Conner, R. Dale
    Johnson, William L.
    Suh, Daewoong
    SCRIPTA MATERIALIA, 2008, 59 (08) : 903 - 908
12345