Dissolution of the θ′ precipitates in an Al-1.7at. % Cu alloy deformed by equal-channel angular pressing

被引：0
|
作者：
Murayama, M [1 ]
Hono, K [1 ]
Horita, Z [1 ]
机构：
[1] Natl Res Inst Met, Tsukuba, Ibaraki 3050047, Japan
来源：
ULTRAFINE GRAINED MATERIALS | 2000年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The microstructural evolution during the equal channel angular (ECA) pressing process of an alpha+ theta' two-phase Al-1.7at.%Cu alloy has been studied by transmission electron microscopy (TEM) and energy-filtered transmission electron microscopy (EF-TEM). The theta' precipitates are fragmented into fine particles after a few passes of ECA perssing. The theta' precipitates are almost completely dissolved after 8 passes of the ECA pressing, and nearly single phase cc with a fine grain size of approximately 500 nm is obtained. The dissolution process of the theta' precipitates and the distribution of Cu atoms during the severe plastic deformation have been observed by energy-filtered TEM.
引用
收藏
页码：145 / 153
页数：9
相关论文
共 50 条
  • [21] Processing of eutectic Zn-5% Al alloy by equal-channel angular pressing
    Purcek, G
    Altan, BS
    Miskioglu, I
    Ooi, PH
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 148 (03) : 279 - 287
  • [22] The aging characteristics of an Al-Ag alloy processed by equal-channel angular pressing
    Ohashi, Kunihiro
    Fujita, Takeshi
    Kaneko, Kenji
    Horita, Zenji
    Langdon, Terence G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 437 (02): : 240 - 247
  • [23] Equal-Channel Angular Pressing of NiAl
    Skrotzki, Werner
    Chulist, Robert
    Beausir, Benoit
    Hockauf, Matthias
    NANOMATERIALS BY SEVERE PLASTIC DEFORMATION: NANOSPD5, PTS 1 AND 2, 2011, 667-669 : 39 - +
  • [24] Equal-channel angular pressing of NiAl
    Skrotzki, Werner
    Chulist, Robert
    Beausir, Benoît
    Hockauf, Matthias
    Materials Science Forum, 2011, 667-669 : 39 - 44
  • [25] Transmission electron microscopy investigations of AZ91 alloy deformed by equal-channel angular pressing
    Braszczynska-Malik, N.
    Litynska, L.
    Baliga, W.
    JOURNAL OF MICROSCOPY, 2006, 224 (01) : 15 - 17
  • [26] Partial dissolution of strengthening particles induced by equal channel angular pressing in an Al-Li-Cu alloy
    Cabibbo, Marcello
    MATERIALS CHARACTERIZATION, 2012, 68 : 7 - 13
  • [27] The development of hardness homogeneity in a Cu-Zr alloy processed by equal-channel angular pressing
    Wongsa-Ngam, Jittraporn
    Kawasaki, Megumi
    Langdon, Terence G.
    Materials Science and Engineering: A, 2012, 556 : 526 - 532
  • [28] Effect of equal-channel angular pressing and aging on the microstructure and mechanical properties of an Al-Cu-Mg-Si alloy
    Gazizov, M. R.
    Dubina, A. V.
    Zhemchuzhnikova, D. A.
    Kaibyshev, R. O.
    PHYSICS OF METALS AND METALLOGRAPHY, 2015, 116 (07): : 718 - 729
  • [29] Lamellae deformation and structural evolution in an Al-33%Cu eutectic alloy during equal-channel angular pressing
    Wang, JT
    Kang, SB
    Kim, HW
    Horita, Z
    JOURNAL OF MATERIALS SCIENCE, 2002, 37 (24) : 5223 - 5227
  • [30] Thermal stability of Cu-Cr-Zr alloy processed by equal-channel angular pressing
    Abib, Khadidja
    Azzeddine, Hiba
    Tirsatine, Kamel
    Baudin, Thierry
    Helbert, Anne-Laure
    Brisset, Francois
    Alili, Baya
    Bradai, Djamel
    MATERIALS CHARACTERIZATION, 2016, 118 : 527 - 534
12345