Partial dissolution of strengthening particles induced by equal channel angular pressing in an Al-Li-Cu alloy

被引：16
|
作者：
Cabibbo, Marcello [1 ]
机构：
[1] Univ Politecn Marche, DIISM, I-60131 Ancona, Italy
来源：
MATERIALS CHARACTERIZATION | 2012年 / 68卷
关键词：
Al-Li alloy; Precipitation hardening; Severe plastic deformation; Equal channel angular pressing; TEM; SEVERE PLASTIC-DEFORMATION; MECHANICAL-PROPERTIES; ZR ALLOY; PRECIPITATION; REFINEMENT;
D O I：
10.1016/j.matchar.2012.03.005
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An Al-Li-Cu (AA2091) alloy was subjected to equal channel angular pressing (ECAP) at 210 degrees C following route B-C to a maximum strain of epsilon=8.64. A considerable particle age hardening anticipation with respect to an isochronal aging treatment was documented. At epsilon=6.48, the alloy reached a peak hardness level, while at epsilon=8.64, the alloy overaged and partial dissolution of the two most abundant hardening particles, T-1 plates and S' laths, was induced by ECAP/B-C. (C) 2012 Elsevier Inc. All rights reserved.
引用
收藏
页码：7 / 13
页数：7
相关论文
共 50 条
  • [1] On strain-induced dissolution of θ′ and θ particles in Al-Cu binary alloy during equal channel angular pressing
    Liu, Zhiyi
    Bai, Song
    Zhou, Xuanwei
    Gu, Yanxia
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (06): : 2217 - 2222
  • [2] Dissolution of the θ′ precipitates in an Al-1.7at. % Cu alloy deformed by equal-channel angular pressing
    Murayama, M
    Hono, K
    Horita, Z
    ULTRAFINE GRAINED MATERIALS, 2000, : 145 - 153
  • [3] Dissolution of the second phase particles in the course of the equal channel angular pressing of diluted Cu-Cr-Zr alloy
    Faizov, I. A.
    Mulyukov, R. R.
    Aksenov, D. A.
    Faizova, S. N.
    Zemlyakova, N. V.
    Cardoso, K. R.
    Zeng, Yu.
    LETTERS ON MATERIALS-PIS MA O MATERIALAKH, 2018, 8 (01): : 110 - 114
  • [4] Strengthening of a commercial Al-5754 alloy using equal-channel angular pressing
    Veveçka, A
    Cavaliere, P
    Cabbibo, M
    Evangelista, E
    Langdon, TG
    JOURNAL OF MATERIALS SCIENCE LETTERS, 2001, 20 (17) : 1601 - 1603
  • [5] Impact properties of Al-Cu alloy subjected to equal channel angular pressing
    Fang Daran
    Duan Qiqiang
    Huang Chongxiang
    Wu Shiding
    Zhang Zhefeng
    Li Jiajun
    Zhao Naiqin
    ACTA METALLURGICA SINICA, 2007, 43 (12) : 1251 - 1255
  • [6] Impact properties of Al-Cu alloy subjected to equal channel angular pressing
    School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China
    不详
    Jinshu Xuebao, 2007, 12 (1251-1255):
  • [7] Effect of Equal Channel Angular Pressing on Microstructure and Recrystallization Temperature of Al-Cu Alloy
    Fang, Daran
    Liu, Chun
    Liu, Fengfang
    Quan, Liwei
    Li, Jiajun
    Zhao, Naiqin
    MATERIALS RESEARCH AND APPLICATIONS, PTS 1-3, 2014, 875-877 : 1581 - +
  • [8] Effect of equal channel angular pressing and annealing on corrosion resistance of Al-Cu alloy
    Fang, D. R.
    Liu, C.
    Liu, F. F.
    FRONTIERS OF CHEMICAL ENGINEERING, METALLURGICAL ENGINEERING AND MATERIALS II, 2013, 803 : 226 - +
  • [9] Microstructural evolution and shear fracture of Cu-16 at.% Al alloy induced by equal channel angular pressing
    An, X. H.
    Lin, Q. Y.
    Wu, S. D.
    Zhang, Z. F.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (16-17): : 4510 - 4514
  • [10] THE WELDABILITY OF AN AL-LI-CU ALLOY
    MARTUKANITZ, RP
    NATALIE, CA
    KNOEFEL, JO
    JOURNAL OF METALS, 1987, 39 (11): : 38 - 42
12345