Impact properties of Al-Cu alloy subjected to equal channel angular pressing

被引：0
|
作者：
School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China [1 ]
不详 [2 ]
机构：
来源：
Jinshu Xuebao | 2007年 / 12卷 / 1251-1255期
关键词：
Casting - Equal channel angular pressing - Fracture toughness - Grain refinement - Tensile strength;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Impact properties of the casting Al-0.63%Cu and Al-3.9%Cu (mass fraction) alloys subjected to equal channel angular pressing (ECAP) were investigated. It is found that the impact properties of Al-0.63%Cu alloy were enhanced after ECAP, while for Al-3.9%Cu alloy, its impact toughness was not improved due to more θ (Al2Cu) phases, although the tensile strength increased because of grain refinement and dispersive precipitation of the second-phase. It is shown that the impact toughness is dependent on the static toughness of the Al-Cu alloys.
引用
收藏
相关论文
共 50 条
  • [1] Impact properties of Al-Cu alloy subjected to equal channel angular pressing
    Fang Daran
    Duan Qiqiang
    Huang Chongxiang
    Wu Shiding
    Zhang Zhefeng
    Li Jiajun
    Zhao Naiqin
    ACTA METALLURGICA SINICA, 2007, 43 (12) : 1251 - 1255
  • [2] Effect of Equal Channel Angular Pressing on Microstructure and Recrystallization Temperature of Al-Cu Alloy
    Fang, Daran
    Liu, Chun
    Liu, Fengfang
    Quan, Liwei
    Li, Jiajun
    Zhao, Naiqin
    MATERIALS RESEARCH AND APPLICATIONS, PTS 1-3, 2014, 875-877 : 1581 - +
  • [3] Effect of equal channel angular pressing and annealing on corrosion resistance of Al-Cu alloy
    Fang, D. R.
    Liu, C.
    Liu, F. F.
    FRONTIERS OF CHEMICAL ENGINEERING, METALLURGICAL ENGINEERING AND MATERIALS II, 2013, 803 : 226 - +
  • [4] Texture evolution in an Al-Cu alloy during equal channel angular pressing: the effect of starting microstructure
    Venkatachalam, P.
    Roy, Shibayan
    Ravisankar, B.
    Paul, V. Thomas
    Vijayalakshmi, M.
    Suwas, Satyam
    JOURNAL OF MATERIALS SCIENCE, 2011, 46 (20) : 6518 - 6527
  • [5] Evolution of precipitates of Al-Cu alloy during equal-channel angular pressing at room temperature
    Xu Xiao-Chang
    Liu Zhi-yi
    Li Yun-tao
    Dang Peng
    Zeng Su-min
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2008, 18 (05) : 1047 - 1052
  • [6] Age-Hardening Responses of Al-Cu Alloy Powders Processed by Equal Channel Angular Pressing
    Saritas, G.
    Tekeli, S.
    Taskesen, A.
    Demir, U.
    Gural, A.
    PHYSICS OF METALS AND METALLOGRAPHY, 2020, 121 (14): : 1455 - 1465
  • [7] Evolution of precipitates of Al-Cu alloy during equal-channel angular pressing at room temperature
    许晓嫦
    刘志义
    李云涛
    党朋
    曾苏明
    TransactionsofNonferrousMetalsSocietyofChina, 2008, (05) : 1047 - 1052
  • [8] Effects of equal channel angular pressing on the strength and toughness of Al-Cu alloys
    Fang, D. R.
    Tian, Y. Z.
    Duan, Q. Q.
    Wu, S. D.
    Zhang, Z. F.
    Zhao, N. Q.
    Li, J. J.
    JOURNAL OF MATERIALS SCIENCE, 2011, 46 (14) : 5002 - 5008
  • [9] Effect of equal channel angular pressing on tensile properties and fracture modes of casting Al-Cu alloys
    Fang, D. R.
    Zhang, Z. F.
    Wu, S. D.
    Huang, C. X.
    Zhang, H.
    Zhao, N. Q.
    Li, J. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 426 (1-2): : 305 - 313
  • [10] Structural Characterization of Binary Al-Cu Alloy Processed by Equal Channel Angular Pressing at Half of the Melting Point
    Sitdikov, O.
    Avtokratova, E.
    Markushev, M.
    Sakai, T.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2023, 54 (02): : 505 - 525
12345