Impact properties of Al-Cu alloy subjected to equal channel angular pressing

被引：0
|
作者：
School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China [1 ]
不详 [2 ]
机构：
来源：
Jinshu Xuebao | 2007年 / 12卷 / 1251-1255期
关键词：
Casting - Equal channel angular pressing - Fracture toughness - Grain refinement - Tensile strength;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Impact properties of the casting Al-0.63%Cu and Al-3.9%Cu (mass fraction) alloys subjected to equal channel angular pressing (ECAP) were investigated. It is found that the impact properties of Al-0.63%Cu alloy were enhanced after ECAP, while for Al-3.9%Cu alloy, its impact toughness was not improved due to more θ (Al2Cu) phases, although the tensile strength increased because of grain refinement and dispersive precipitation of the second-phase. It is shown that the impact toughness is dependent on the static toughness of the Al-Cu alloys.
引用
收藏
相关论文
共 50 条
  • [31] Deformation characteristics of Cu-30 % Zn alloy subjected to dynamic equal channel angular pressing (DECAP)
    Zhang, Mingya
    Liu, Li
    Huang, Zhenyi
    Li, Jinghui
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2020, 111 (02) : 129 - 135
  • [32] Influence of equal-channel angular pressing on precipitation in an Al-Zn-Mg-Cu alloy
    Sha, G.
    Wang, Y. B.
    Liao, X. Z.
    Duan, Z. C.
    Ringer, S. P.
    Langdon, T. G.
    ACTA MATERIALIA, 2009, 57 (10) : 3123 - 3132
  • [33] Dissolution of the θ′ precipitates in an Al-1.7at. % Cu alloy deformed by equal-channel angular pressing
    Murayama, M
    Hono, K
    Horita, Z
    ULTRAFINE GRAINED MATERIALS, 2000, : 145 - 153
  • [34] Texture evolution in an Al–Cu alloy during equal channel angular pressing: the effect of starting microstructure
    P. Venkatachalam
    Shibayan Roy
    B. Ravisankar
    V. Thomas Paul
    M. Vijayalakshmi
    Satyam Suwas
    Journal of Materials Science, 2011, 46 : 6518 - 6527
  • [35] Microstructural evolution in an Al-1.7 at%Cu alloy deformed by equal-channel angular pressing
    Murayama, M
    Hono, K
    Horita, Z
    MATERIALS TRANSACTIONS JIM, 1999, 40 (09): : 938 - 941
  • [36] Age-Hardening Responses of Al–Cu Alloy Powders Processed by Equal Channel Angular Pressing
    G. Sarıtaş
    S. Tekeli
    A. Taşkesen
    Ü. Demir
    A. Güral
    Physics of Metals and Metallography, 2020, 121 : 1455 - 1465
  • [37] Flow properties of an aluminum alloy processed by equal channel angular pressing
    A. Sivaraman
    Uday Chakkingal
    Journal of Materials Science, 2008, 43 : 7432 - 7437
  • [38] Microstructure and Mechanical Properties of Cast Al-5Zn-2Mg Alloy Subjected to Equal-Channel Angular Pressing
    G. K. Manjunath
    G. V. Preetham Kumar
    K. Udaya Bhat
    Prashant Huilgol
    Journal of Materials Engineering and Performance, 2018, 27 : 5644 - 5655
  • [39] Flow properties of an aluminum alloy processed by equal channel angular pressing
    Sivaraman, A.
    Chakkingal, Uday
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (23-24) : 7432 - 7437
  • [40] Microstructure and Mechanical Properties of Cast Al-5Zn-2Mg Alloy Subjected to Equal-Channel Angular Pressing
    Manjunath, G. K.
    Kumar, G. V. Preetham
    Bhat, K. Udaya
    Huilgol, Prashant
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (11) : 5644 - 5655
12345