Partial dissolution of strengthening particles induced by equal channel angular pressing in an Al-Li-Cu alloy

被引：16
|
作者：
Cabibbo, Marcello [1 ]
机构：
[1] Univ Politecn Marche, DIISM, I-60131 Ancona, Italy
来源：
MATERIALS CHARACTERIZATION | 2012年 / 68卷
关键词：
Al-Li alloy; Precipitation hardening; Severe plastic deformation; Equal channel angular pressing; TEM; SEVERE PLASTIC-DEFORMATION; MECHANICAL-PROPERTIES; ZR ALLOY; PRECIPITATION; REFINEMENT;
D O I：
10.1016/j.matchar.2012.03.005
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An Al-Li-Cu (AA2091) alloy was subjected to equal channel angular pressing (ECAP) at 210 degrees C following route B-C to a maximum strain of epsilon=8.64. A considerable particle age hardening anticipation with respect to an isochronal aging treatment was documented. At epsilon=6.48, the alloy reached a peak hardness level, while at epsilon=8.64, the alloy overaged and partial dissolution of the two most abundant hardening particles, T-1 plates and S' laths, was induced by ECAP/B-C. (C) 2012 Elsevier Inc. All rights reserved.
引用
收藏
页码：7 / 13
页数：7
相关论文
共 50 条
  • [21] Low cycle fatigue properties of Al-Li-Cu-Mg-Zr alloy processed by equal-channel angular pressing
    S. M. Liu
    Z. G. Wang
    Journal of Materials Science, 2004, 39 : 733 - 735
  • [22] Influence of equal-channel angular pressing on precipitation in an Al-Zn-Mg-Cu alloy
    Sha, G.
    Wang, Y. B.
    Liao, X. Z.
    Duan, Z. C.
    Ringer, S. P.
    Langdon, T. G.
    ACTA MATERIALIA, 2009, 57 (10) : 3123 - 3132
  • [23] Texture evolution in an Al–Cu alloy during equal channel angular pressing: the effect of starting microstructure
    P. Venkatachalam
    Shibayan Roy
    B. Ravisankar
    V. Thomas Paul
    M. Vijayalakshmi
    Satyam Suwas
    Journal of Materials Science, 2011, 46 : 6518 - 6527
  • [24] Microstructural evolution in an Al-1.7 at%Cu alloy deformed by equal-channel angular pressing
    Murayama, M
    Hono, K
    Horita, Z
    MATERIALS TRANSACTIONS JIM, 1999, 40 (09): : 938 - 941
  • [25] Age-Hardening Responses of Al–Cu Alloy Powders Processed by Equal Channel Angular Pressing
    G. Sarıtaş
    S. Tekeli
    A. Taşkesen
    Ü. Demir
    A. Güral
    Physics of Metals and Metallography, 2020, 121 : 1455 - 1465
  • [26] Refinement and consolidation of pure Al particles by equal channel angular pressing and torsion
    Li, Ping
    Xue, Ke-min
    Wang, Xiao-xi
    Qian, Chen-hao
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (05) : 1289 - 1294
  • [27] Research on Cu-Cr Alloy Produced by Equal Channel Angular Pressing
    Zhang, Xiuqing
    Chen, Ge
    Chen, Xiaona
    MECHANICAL MATERIALS AND MANUFACTURING ENGINEERING III, 2014, 455 : 131 - 136
  • [28] An investigation of the properties of an Al-Mg-Li-Zr alloy after equal-channel angular pressing
    Berbon, P
    Furukawa, M
    Horita, Z
    Nemoto, M
    Tsenev, NK
    Valiev, RZ
    Langdon, TG
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 : 1013 - 1018
  • [29] Grain refinement and strengthening of a Cu-0.1Cr-0.06Zr alloy subjected to equal channel angular pressing
    Morozova, Anna
    Kaibyshev, Rustam
    PHILOSOPHICAL MAGAZINE, 2017, 97 (24) : 2053 - 2076
  • [30] EFFECT OF EQUAL-CHANNEL ANGULAR PRESSING ON STRUCTURE OF Al ALLOY 2024
    Suppoted by the National Natural Science Foundation of China(59471015) Received Apr. 15
    accepted Jun. 5
    TransactionsofNonferrousMetalsSocietyofChina, 1997, (02) : 161 - 163
12345