Evaluation of the chemical index model for predicting supplementary cementitious material dosage to prevent the alkali-silica reaction in concrete

被引:12
|
作者
Cassiani, Juan [1 ]
Dugarte, Margareth [2 ]
Martinez-Arguelles, Gilberto [2 ]
机构
[1] Univ Fed Armed Forces Hamburg, Helmut Schmidt Univ, Construct Mat & Bldg Preservat, D-22043 Hamburg, Germany
[2] Univ Norte, Dept Civil & Environm Engn, Km 5 Via Puerto Colombia, Barranquilla, Colombia
关键词
Alkali-silica reaction; Natural aggregate; Recycled concrete aggregate; Supplementary cementitious materials; Modeling; Chemical constituents; Fly ash; Silica fume; Slag; FLY-ASH DOSAGE; REACTION MITIGATION; ACCELERATED TEST; TERNARY BLENDS; DURABILITY; SLAG; RELIABILITY; EFFICIENCY; CALCIUM; IMPACT;
D O I
10.1016/j.conbuildmat.2020.122158
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This study investigates the chemical index model effectiveness in predicting the minimum replacement of several types of Supplementary Cementitious Materials (SCMs) to mitigate the potential Alkali-Silica Reaction (ASR) in concrete. The experimental program results evaluating four natural aggregates (AF1, AF2, AF3, and AF4) and two Recycled Concrete Aggregates (RCA1 and RCA2), as presented here, were used in the model predictions. The SCMs used in this study consisted of fly ash class C (FA1), fly ash class F (FA2), ground granulated blast-furnace slag (SL), and silica fume (SF). For each SCMs, three levels of Portland cement replacements were used in the production of mortar bars: 15%-20%-25% for FA1-FA2; 20%-40%-60% for SL; and 5%-8%-10% for SF. The natural aggregates were tested according to the ASTM C1260 accelerated mortar bar test. For the RCA, an alternative preparation procedure was applied in the experimental phase to eliminate variability in the results given the RCA's high absorption. Further testing was then implemented for the aggregates classified as potentially reactive by evaluating different SCMs replacement levels to mitigate ASR using the accelerated mortar bar method, following the ASTM C1567. A Monte Carlo simulation was conducted to evaluate the chemical index prediction uncertainty, based on the model inputs statistical variation. The SCMs evaluated in this investigation were effective in mitigating ASR while used in sufficient proportion. The most effective SCMs in reducing ASR was silica fume, with a 10% replacement of Portland cement's weight, fly ash class F was next (15-25%), and finally ground granulated blast-furnace slag (40-60%). The chemical index has proven to give good results when predicting the minimum replacement of supplementary cementitious materials required to suppress ASR based on its chemical composition. (C) 2020 Elsevier Ltd. All rights reserved.
引用
收藏
页数:12
相关论文
共 50 条
  • [41] A REGULARIZED DAMAGE MODEL FOR STRUCTURAL ANALYSES OF CONCRETE DAMS IN THE PRESENCE OF ALKALI-SILICA REACTION
    Colombo, M.
    Comi, C.
    VIII INTERNATIONAL CONFERENCE ON COMPUTATIONAL METHODS FOR COUPLED PROBLEMS IN SCIENCE AND ENGINEERING (COUPLED PROBLEMS 2019), 2019, : 789 - 800
  • [42] Alkali-Silica Reaction Resistance of Cementitious Material Containing CaCl2-Blended Acrylic Polymer Emulsion
    Onuaguluchi, Obinna
    Banthia, Nemkumar
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2020, 32 (03)
  • [43] Evaluation of alkali-silica reaction damage in concrete by using acoustic emission signal features and damage rating index: damage monitoring on concrete prisms
    Tayfur, Sena
    Yuksel, Cihat
    Alver, Ninel
    Akar, Oguz
    Andic-Cakir, Ozge
    MATERIALS AND STRUCTURES, 2021, 54 (04)
  • [44] Multi-scale evaluation of hybrid fiber restraint of alkali-silica reaction expansion in concrete
    Jen, Gabriel
    Hay, Rotana
    Ostertag, Claudia P.
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 211 : 1117 - 1126
  • [45] Chemical Sequence and Kinetics of Alkali-Silica Reaction Part II. A Thermodynamic Model
    Kim, Taehwan
    Olek, Jan
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2014, 97 (07) : 2204 - 2212
  • [46] Evaluation of structures affected by Alkali-Silica reaction (ASR) using homogenized modelling of reinforced concrete
    Vo, Daniela
    Multon, Stephane
    Morenon, Pierre
    Sellier, Alain
    Grimal, Etienne
    Masson, Benoit
    Kolmayer, Philippe
    ENGINEERING STRUCTURES, 2021, 246
  • [47] Nonlinear Acoustic Technique of Time Shift for Evaluation of Alkali-Silica Reaction Damage in Concrete Structures
    Moradi-Marani, Farid
    Kodjo, Serge Apedovi
    Rivard, Patrice
    Lamarche, Charles-Philippe
    ACI MATERIALS JOURNAL, 2014, 111 (05) : 581 - 591
  • [48] Use of the Damage Rating Index as Input for Service Life Prediction in Alkali-Silica Reaction Affected Concrete
    Shrimer, Fred
    ADVANCES IN CEMENT ANALYSIS AND CONCRETE PETROGRAPHY, 2019, 1613 : 89 - 104
  • [49] A chemo-thermo-damage model for the analysis of concrete dams affected by alkali-silica reaction
    Comi, C.
    Fedele, R.
    Perego, U.
    MECHANICS OF MATERIALS, 2009, 41 (03) : 210 - 230
  • [50] Alkali-Silica Reaction and Residual Mechanical Properties of High-Strength Mortar Containing Waste Glass Fine Aggregate and Supplementary Cementitious Materials
    Eu, Hamin
    Kim, Gyuyong
    Son, Minjae
    Sasui, Sasui
    Lee, Yaechan
    Choi, Hyeonggil
    Kang, Sukpyo
    Nam, Jeongsoo
    INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS, 2024, 18 (01)