Evaluation of the chemical index model for predicting supplementary cementitious material dosage to prevent the alkali-silica reaction in concrete

被引:12
|
作者
Cassiani, Juan [1 ]
Dugarte, Margareth [2 ]
Martinez-Arguelles, Gilberto [2 ]
机构
[1] Univ Fed Armed Forces Hamburg, Helmut Schmidt Univ, Construct Mat & Bldg Preservat, D-22043 Hamburg, Germany
[2] Univ Norte, Dept Civil & Environm Engn, Km 5 Via Puerto Colombia, Barranquilla, Colombia
关键词
Alkali-silica reaction; Natural aggregate; Recycled concrete aggregate; Supplementary cementitious materials; Modeling; Chemical constituents; Fly ash; Silica fume; Slag; FLY-ASH DOSAGE; REACTION MITIGATION; ACCELERATED TEST; TERNARY BLENDS; DURABILITY; SLAG; RELIABILITY; EFFICIENCY; CALCIUM; IMPACT;
D O I
10.1016/j.conbuildmat.2020.122158
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This study investigates the chemical index model effectiveness in predicting the minimum replacement of several types of Supplementary Cementitious Materials (SCMs) to mitigate the potential Alkali-Silica Reaction (ASR) in concrete. The experimental program results evaluating four natural aggregates (AF1, AF2, AF3, and AF4) and two Recycled Concrete Aggregates (RCA1 and RCA2), as presented here, were used in the model predictions. The SCMs used in this study consisted of fly ash class C (FA1), fly ash class F (FA2), ground granulated blast-furnace slag (SL), and silica fume (SF). For each SCMs, three levels of Portland cement replacements were used in the production of mortar bars: 15%-20%-25% for FA1-FA2; 20%-40%-60% for SL; and 5%-8%-10% for SF. The natural aggregates were tested according to the ASTM C1260 accelerated mortar bar test. For the RCA, an alternative preparation procedure was applied in the experimental phase to eliminate variability in the results given the RCA's high absorption. Further testing was then implemented for the aggregates classified as potentially reactive by evaluating different SCMs replacement levels to mitigate ASR using the accelerated mortar bar method, following the ASTM C1567. A Monte Carlo simulation was conducted to evaluate the chemical index prediction uncertainty, based on the model inputs statistical variation. The SCMs evaluated in this investigation were effective in mitigating ASR while used in sufficient proportion. The most effective SCMs in reducing ASR was silica fume, with a 10% replacement of Portland cement's weight, fly ash class F was next (15-25%), and finally ground granulated blast-furnace slag (40-60%). The chemical index has proven to give good results when predicting the minimum replacement of supplementary cementitious materials required to suppress ASR based on its chemical composition. (C) 2020 Elsevier Ltd. All rights reserved.
引用
收藏
页数:12
相关论文
共 50 条
  • [21] Effectiveness of nondestructive testing for the evaluation of alkali-silica reaction in concrete
    Sargolzahi, Maryam
    Kodjo, Serge A.
    Rivard, Patrice
    Rhazi, Jamal
    CONSTRUCTION AND BUILDING MATERIALS, 2010, 24 (08) : 1398 - 1403
  • [22] Laboratory and field investigations of alkali-silica reaction prevention by supplementary cementitious materials: Influence of the free alkali loading
    Ranger, Maxime
    Hasholt, Marianne Tange
    Lindgard, Jan
    Barbosa, Ricardo Antonio
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 442
  • [23] Development of prediction models for evaluation of alkali-silica reaction in concrete
    Aslani, Farhad
    Yu, Jiacheng
    Zhang, Yifan
    Valizadeh, Afsaneh
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2023, 19
  • [24] PERFORMANCE EVALUATION OF GEOPOLYMER CONCRETE THROUGH ALKALI-SILICA REACTION
    Singh, B.
    Ishwarya, G.
    Gupta, M.
    Bhattacharyya, S. K.
    ADVANCES IN CHEMICALLY-ACTIVATED MATERIALS (CAM'2014), 2014, 92 : 395 - 405
  • [25] Estimation of non-traditional supplementary cementitious materials potential to prevent alkali-silica reaction using pozzolanic reactivity and bulk resistivity
    Wang, Ying
    Ramanathan, Sivakumar
    Chopperla, Krishna Siva Teja
    Ideker, Jason H.
    Suraneni, Prannoy
    CEMENT & CONCRETE COMPOSITES, 2022, 133
  • [26] Mechanisms of Alkali-Silica Reaction Mitigation in AMBT Conditions: Comparative Study of Traditional Supplementary Cementitious Materials
    Tapas, Marie Joshua
    Thomas, Paul
    Vessalas, Kirk
    Sirivivatnanon, Vute
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2022, 34 (03)
  • [27] Digital Microscopy Applied to Damage Rating Index for Alkali-Silica Reaction in Concrete
    Dehghan, Alireza
    Zhang, Peiying
    Ossetchkina, Ekaterina
    Sloan, Daniel
    Peterson, Karl
    ADVANCES IN CEMENT ANALYSIS AND CONCRETE PETROGRAPHY, 2019, 1613 : 105 - 125
  • [28] Simplified Model for the Transport of Alkali-Silica Reaction Gel in Concrete Porosity
    Charpin, Laurent
    Ehrlacher, Alain
    JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2014, 12 (01) : 1 - 6
  • [29] An Innovative Approach to Fly Ash Characterization and Evaluation to Prevent Alkali-Silica Reaction
    Mukhopadhyay, Anol K.
    Liu, Kai-Wei
    Jalal, Mostafa
    ACI MATERIALS JOURNAL, 2019, 116 (04) : 173 - 181
  • [30] MODELING OF ALKALI-SILICA REACTION IN A TWO-PHASED MATERIAL MODEL
    Itam, Zarina
    Husain, Hazran
    JURNAL TEKNOLOGI, 2015, 76 (09): : 13 - 17