Evaluation of the chemical index model for predicting supplementary cementitious material dosage to prevent the alkali-silica reaction in concrete

被引:12
|
作者
Cassiani, Juan [1 ]
Dugarte, Margareth [2 ]
Martinez-Arguelles, Gilberto [2 ]
机构
[1] Univ Fed Armed Forces Hamburg, Helmut Schmidt Univ, Construct Mat & Bldg Preservat, D-22043 Hamburg, Germany
[2] Univ Norte, Dept Civil & Environm Engn, Km 5 Via Puerto Colombia, Barranquilla, Colombia
关键词
Alkali-silica reaction; Natural aggregate; Recycled concrete aggregate; Supplementary cementitious materials; Modeling; Chemical constituents; Fly ash; Silica fume; Slag; FLY-ASH DOSAGE; REACTION MITIGATION; ACCELERATED TEST; TERNARY BLENDS; DURABILITY; SLAG; RELIABILITY; EFFICIENCY; CALCIUM; IMPACT;
D O I
10.1016/j.conbuildmat.2020.122158
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This study investigates the chemical index model effectiveness in predicting the minimum replacement of several types of Supplementary Cementitious Materials (SCMs) to mitigate the potential Alkali-Silica Reaction (ASR) in concrete. The experimental program results evaluating four natural aggregates (AF1, AF2, AF3, and AF4) and two Recycled Concrete Aggregates (RCA1 and RCA2), as presented here, were used in the model predictions. The SCMs used in this study consisted of fly ash class C (FA1), fly ash class F (FA2), ground granulated blast-furnace slag (SL), and silica fume (SF). For each SCMs, three levels of Portland cement replacements were used in the production of mortar bars: 15%-20%-25% for FA1-FA2; 20%-40%-60% for SL; and 5%-8%-10% for SF. The natural aggregates were tested according to the ASTM C1260 accelerated mortar bar test. For the RCA, an alternative preparation procedure was applied in the experimental phase to eliminate variability in the results given the RCA's high absorption. Further testing was then implemented for the aggregates classified as potentially reactive by evaluating different SCMs replacement levels to mitigate ASR using the accelerated mortar bar method, following the ASTM C1567. A Monte Carlo simulation was conducted to evaluate the chemical index prediction uncertainty, based on the model inputs statistical variation. The SCMs evaluated in this investigation were effective in mitigating ASR while used in sufficient proportion. The most effective SCMs in reducing ASR was silica fume, with a 10% replacement of Portland cement's weight, fly ash class F was next (15-25%), and finally ground granulated blast-furnace slag (40-60%). The chemical index has proven to give good results when predicting the minimum replacement of supplementary cementitious materials required to suppress ASR based on its chemical composition. (C) 2020 Elsevier Ltd. All rights reserved.
引用
收藏
页数:12
相关论文
共 50 条
  • [31] Evaluation and Repair of Alkali-Silica Reaction Damage to Existing Concrete Wastewater Infrastructure
    Wouters, Jeffrey
    FORENSIC ENGINEERING 2018: FORGING FORENSIC FRONTIERS, 2018, : 726 - 735
  • [32] Ultrasonic nondestructive evaluation of alkali-silica reaction damage in concrete prism samples
    Ju, Taeho
    Achenbach, Jan D.
    Jacobs, Laurence J.
    Guimaraes, Maria
    Qu, Jianmin
    MATERIALS AND STRUCTURES, 2017, 50 (01)
  • [33] Extension of the chemical index model for estimating Alkali-Silica reaction mitigation efficiency to slags and natural pozzolans
    Mahyar, Mandi
    Erdogan, Sinan Turhan
    Tokyay, Mustafa
    CONSTRUCTION AND BUILDING MATERIALS, 2018, 179 : 587 - 597
  • [34] A multiscale micromechanical approach to model the deteriorating impact of alkali-silica reaction on concrete
    Esposito, Rita
    Hendriks, Max A. N.
    CEMENT & CONCRETE COMPOSITES, 2016, 70 : 139 - 152
  • [35] Simulation of Alkali-Silica Reaction Model in a Concrete Gravity Dam at the Macroscale and Mesoscale
    Itam, Z.
    Beddu, S.
    Mohammad, D.
    Kamal, N. L. M.
    Razak, N. A.
    Hamid, Z. A. A.
    MATERIALS TODAY-PROCEEDINGS, 2019, 17 : 717 - 726
  • [36] Alkali-silica reaction and microstructure of concrete subjected to combined chemical and physical exposure conditions
    Jozwiak-Niedzwiedzka, Daria
    Dabrowski, Mariusz
    Gibas, Karolina
    Antolik, Aneta
    Glinicki, Michal A.
    8TH SCIENTIFIC-TECHNICAL CONFERENCE ON MATERIAL PROBLEMS IN CIVIL ENGINEERING (MATBUD'2018), 2018, 163
  • [37] Evaluation of alkali-silica reaction damage in concrete using linear and nonlinear resonance techniques
    Malone, Clayton
    Zhu, Jinying
    Hu, Jiong
    Snyder, April
    Giannini, Eric
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 303
  • [38] LABORATORY EVALUATION OF ALKALI-SILICA REACTION IN CONCRETE FROM SAUNDERS GENERATING-STATION
    GRATTANBELLEW, PE
    ACI MATERIALS JOURNAL, 1995, 92 (02) : 126 - 134
  • [39] Alkali-Silica Reaction in Reinforced Concrete Structures Part I: Material Properties and Crack Orientation
    Barbosa, Ricardo Antonio
    Hansen, Kurt Kielsgaard
    Linh Cao Hoang
    Larsen, Erik Stoklund
    NORDIC CONCRETE RESEARCH, 2014, 50 (02): : 65 - 68
  • [40] A new understanding of the alkali-silica reaction expansion in concrete using a hybrid ensemble model
    Zhang, Junfei
    Zhang, Yongshun
    Marani, Afshin
    Zhang, Lei
    JOURNAL OF BUILDING ENGINEERING, 2024, 96