Using Taguchi Robust Design to Ultrasonic Vibration Assisted Turning AISI 1045

被引：1

作者：

Huang, Wei-Tai ^{[1
]}

Wu, Der-Ho ^{[1
]}

Chen, Yi-Siang ^{[1
]}

机构：

[1] Natl Pingtung Univ Sci & Technol, 1 Shuefu Rd, Pingtung 912, Taiwan

来源：

PROCEEDINGS OF THE 38TH INTERNATIONAL MATADOR CONFERENCE | 2022年

关键词：

Ultrasonic vibration-assisted turning tool system; Ultrasonic vibration-assisted machining; Taguchi robust design method; SURFACE-ROUGHNESS; SIMULATIONS;

D O I：

10.1007/978-3-319-64943-6_18

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

An ultrasonic vibration-assisted turning tool system is studied using the Taguchi robust design method. An experiment is conducted to measure surface accuracy for ultrasonic-vibration assisted turning of AISI 1045 steel, establishing the following optimal parameters: frequency of 20 kHz, voltage of 75 V, cutting speed of 150 m/min, and feed rate of 0.05 mm/rev. The differences between surface roughness with and without ultrasonic vibration-assisted turning are examined. It shown that surface roughness is lower with ultrasonic vibration-assisted machining than without.

引用

页码：259 / 267

页数：9

共 50 条

[31] FEM analysis of ultrasonic-vibration-assisted turning and the vibratory tool
Amini, S.
Soleimanimehr, H.
Nategh, M. J.
Abudollah, A.
Sadeghi, M. H.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 201 (1-3) : 43 - 47
[32] Characteristics of a novel elliptical ultrasonic vibration-assisted turning device
Anugraha, Rino Andias
Hosea, Kevin
Rahman, Raden Fathur
Sjafrizal, Teddy
Mulyana, Tatang
Ibrahim, Mohd Rasidi
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2024,
[33] Analysis of Diametrical Error of Machined Workpieces in Ultrasonic Vibration Assisted Turning
Soleimanimehr, H.
Nategh, M. J.
Amini, S.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 1079 - +
[34] Analysis of surface texturing in radial ultrasonic vibration-assisted turning
Liu, Xianfu
Wu, Debao
Zhang, Jianhua
Hu, Xiangyi
Cui, Ping
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 267 : 186 - 195
[35] Tests for ultrasonic elliptical vibration-assisted turning of titanium alloy
College of Mechanical & Electrical Engineering, Beijing University of Technology, Beijing
100124, China
不详
330063, China
不详
015-0055, Japan
J Vib Shock, 6 (151-154):
[36] Analysis of Forces during Hard Turning of AISI 52100 Steel Using Taguchi Method
Sankar, B. Ravi
Rao, P. Umamaheswar
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 2114 - 2118
[37] Optimization of Machining Parameters for the Turning Process of AISI 316 L Stainless Steel and Taguchi Design
Basmaci, G.
ACTA PHYSICA POLONICA A, 2018, 134 (01) : 260 - 264
[38] Numerical Simulation on Vibration-Assisted Ultra-Precision Cutting of Steel AISI 1045 with PCD Tool
Al-Zahrani, Ahmed
Dan, Xie Xiao
Yong, Li
ULTRA-PRECISION MACHINING TECHNOLOGIES, 2012, 497 : 324 - 328
[39] Prediction of Machining Force and Surface Roughness in Ultrasonic Vibration-Assisted Turning Using Neural Networks
Soleimanimehr, H.
Nategh, M. J.
Amini, S.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2010, 83-86 : 326 - +
[40] Investigation of conventional and ultrasonic vibration-assisted turning of hardened steel using a coated carbide tool
Ghule, Govind S.
Sanap, Sudarshan
Chinchanikar, Satish
Cep, Robert
Kumar, Ajay
Bhave, Suresh Y.
Kumar, Rakesh
Altarazi, Faisal
FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, 2024, 10

← 1 2 3 4 5 →