Using Taguchi Robust Design to Ultrasonic Vibration Assisted Turning AISI 1045

被引：1

作者：

Huang, Wei-Tai ^{[1
]}

Wu, Der-Ho ^{[1
]}

Chen, Yi-Siang ^{[1
]}

机构：

[1] Natl Pingtung Univ Sci & Technol, 1 Shuefu Rd, Pingtung 912, Taiwan

来源：

PROCEEDINGS OF THE 38TH INTERNATIONAL MATADOR CONFERENCE | 2022年

关键词：

Ultrasonic vibration-assisted turning tool system; Ultrasonic vibration-assisted machining; Taguchi robust design method; SURFACE-ROUGHNESS; SIMULATIONS;

D O I：

10.1007/978-3-319-64943-6_18

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

An ultrasonic vibration-assisted turning tool system is studied using the Taguchi robust design method. An experiment is conducted to measure surface accuracy for ultrasonic-vibration assisted turning of AISI 1045 steel, establishing the following optimal parameters: frequency of 20 kHz, voltage of 75 V, cutting speed of 150 m/min, and feed rate of 0.05 mm/rev. The differences between surface roughness with and without ultrasonic vibration-assisted turning are examined. It shown that surface roughness is lower with ultrasonic vibration-assisted machining than without.

引用

页码：259 / 267

页数：9

共 50 条

[21] Performance assessment of some selected vegetable oils as lubricants in turning of AISI 1045 steel using a Taguchi-based grey relational analysis approach
Abegunde, P. O.
Kazeem, R. A.
Akande, I. G.
Ikumapayi, O. M.
Adebayo, A. S.
Jen, T. -c.
Akinlabi, S. A.
Akinlabi, E. T.
TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2023, 17 (03) : 187 - 202
[22] Ultrasonic Vibration Assisted Turning of Inconel 825: An Experimental Analysis
Sahoo, Ananda Kumar
Sahoo, Susanta Kumar
Pattanayak, Suvranshu
Moharana, Manoj Kumar
MATERIALS AND MANUFACTURING PROCESSES, 2023, 38 (12) : 1600 - 1614
[23] Research on the machining mechanism of AISI 304 ultrasonic vibration assisted grinding
Yang, Zhenyu
Zou, Ping
Zhou, Liang
Wang, Xue
APPLIED ACOUSTICS, 2023, 214
[24] Optimization of Wire Electric Discharge Machining (WEDM) Process Parameters for AISI 1045 Medium Carbon Steel Using Taguchi Design of Experiments
Zaman, Uzair Khaleeq Uz
Khan, Usman Ahmed
Aziz, Shahid
Baqai, Aamer Ahmed
Butt, Sajid Ullah
Hussain, Danish
Siadat, Ali
Jung, Dong Won
MATERIALS, 2022, 15 (21)
[25] Design Selection of an Innovative Tool Holder for Ultrasonic Vibration Assisted Turning (IN-UVAT) Using Finite Element Analysis Simulation
Rachmat, Haris
Ibrahim, M. Rasidi
bin Hasan, Sulaiman
7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME'16), 2017, 1831
[26] Finite Element Analysis in Ultrasonic Elliptical Vibration Cutting (UEVC) During Micro-Grooving in AISI 1045
Rendi Kurniawan
S. Thirumalai Kumaran
Tae Jo Ko
International Journal of Precision Engineering and Manufacturing, 2021, 22 : 1497 - 1515
[27] Finite Element Analysis in Ultrasonic Elliptical Vibration Cutting (UEVC) During Micro-Grooving in AISI 1045
Kurniawan, Rendi
Kumaran, S. Thirumalai
Ko, Tae Jo
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2021, 22 (09) : 1497 - 1515
[28] Design and optimization of process parameters for hard turning of AISI 304 stainless steel using Taguchi-GRA-PCA
Rathod, N. J.
Chopra, M. K.
Chaurasiya, Prem Kumar
Pawar, S. H.
Tiwari, Damodar
Kumar, Rajan
Saxena, Kuldeep K.
Buddhi, Dharam
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2023, 17 (05): : 2403 - 2414
[29] OPTIMIZATION OF SURFACE ROUGHNESS OF AISI 304 AUSTENITIC STAINLESS STEEL IN DRY TURNING OPERATION USING TAGUCHI DESIGN METHOD
Selvaraj, D. Philip
Chandramohan, P.
JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2010, 5 (03) : 293 - 301
[30] Design and optimization of process parameters for hard turning of AISI 304 stainless steel using Taguchi-GRA-PCA
N. J. Rathod
M. K. Chopra
Prem Kumar Chaurasiya
S. H. Pawar
Damodar Tiwari
Rajan Kumar
Kuldeep K. Saxena
Dharam Buddhi
International Journal on Interactive Design and Manufacturing (IJIDeM), 2023, 17 : 2403 - 2414

← 1 2 3 4 5 →