Using Taguchi Robust Design to Ultrasonic Vibration Assisted Turning AISI 1045

被引：1
|
作者：
Huang, Wei-Tai [1 ]
Wu, Der-Ho [1 ]
Chen, Yi-Siang [1 ]
机构：
[1] Natl Pingtung Univ Sci & Technol, 1 Shuefu Rd, Pingtung 912, Taiwan
来源：
PROCEEDINGS OF THE 38TH INTERNATIONAL MATADOR CONFERENCE | 2022年
关键词：
Ultrasonic vibration-assisted turning tool system; Ultrasonic vibration-assisted machining; Taguchi robust design method; SURFACE-ROUGHNESS; SIMULATIONS;
D O I：
10.1007/978-3-319-64943-6_18
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An ultrasonic vibration-assisted turning tool system is studied using the Taguchi robust design method. An experiment is conducted to measure surface accuracy for ultrasonic-vibration assisted turning of AISI 1045 steel, establishing the following optimal parameters: frequency of 20 kHz, voltage of 75 V, cutting speed of 150 m/min, and feed rate of 0.05 mm/rev. The differences between surface roughness with and without ultrasonic vibration-assisted turning are examined. It shown that surface roughness is lower with ultrasonic vibration-assisted machining than without.
引用
收藏
页码：259 / 267
页数：9
相关论文
共 50 条
  • [1] Optimization of AISI 1045 end milling using robust parameter design
    T. G. Brito
    A. P. Paiva
    T. I. Paula
    D. N. Dalosto
    J. R. Ferreira
    P. P. Balestrassi
    The International Journal of Advanced Manufacturing Technology, 2016, 84 : 1185 - 1199
  • [2] Optimization of AISI 1045 end milling using robust parameter design
    Brito, T. G.
    Paiva, A. P.
    Paula, T. I.
    Dalosto, D. N.
    Ferreira, J. R.
    Balestrassi, P. P.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 84 (5-8): : 1185 - 1199
  • [3] Optimization of process parameters for machining of AISI-1045 steel using Taguchi design and ANOVA
    Qasim, Arsalan
    Nisar, Salman
    Shah, Aqueel
    Khalid, Muhammad Saeed
    Sheikh, Mohammed A.
    SIMULATION MODELLING PRACTICE AND THEORY, 2015, 59 : 36 - 51
  • [4] Experimental investigation of cryogenically treated HSS tool in turning on AISI1045 using fuzzy logic - Taguchi approach
    Raja, P.
    Malayalamurthi, R.
    Sakthivel, M.
    BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2019, 67 (04) : 687 - 696
  • [5] Ultrasonic vibration-assisted hard turning of AISI 52100 steel: comparative evaluation and modeling using dimensional analysis
    Ghule, Govind
    Sanap, Sudarshan
    Chinchanikar, Satish
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2023, 25 (04): : 136 - 148
  • [6] Ultrasonic-assisted ball burnishing of aluminum 6061 and AISI 1045 steel
    Amini, Saeid
    Bagheri, Alireza
    Teimouri, Reza
    MATERIALS AND MANUFACTURING PROCESSES, 2018, 33 (11) : 1250 - 1259
  • [7] Ultrasonic-assisted on the turning of Inconel 718 by Taguchi method
    Chen, Ding-Yeng
    Tsao, Chung-Chen
    Lin, Mao-Yong
    Tsai, Che-Hsiung
    Hsu, Chun-Yao
    ADVANCED MANUFACTURING FOCUSING ON MULTI-DISCIPLINARY TECHNOLOGIES, 2012, 579 : 160 - 173
  • [8] Ultrasonic assisted turning of AISI 52100 steel using nanoparticle-MQL method
    Agar, Salih
    Tosun, Nihat
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2021, 9 (01)
  • [9] Fatigue enhancement and hardening effect through ultrasonic vibration-assisted ball-burnishing process on AISI 1045 steel
    Velazquez-Corral, Eric
    Lluma, Jordi
    Jerez-Mesa, Ramon
    Wagner, Vincent
    Dessein, Gilles
    Travieso-Rodriguez, J. Antonio
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2024, 47 (01) : 203 - 219
  • [10] Design and Analysis of Ultrasonic Vibratory Tool (UVT) using FEM, and Experimental study on Ultrasonic Vibration-assisted Turning (UAT)
    Vivekananda, K.
    Arka, G. N.
    Sahoo, S. K.
    12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 1178 - 1186
12345