Effect of preaging on precipitation hardening in Al-Si-Mg alloys

被引:0
|
作者
Tan, YH [1 ]
Lee, SL [1 ]
Wang, PS [1 ]
机构
[1] Natl Cent Univ, Dept Mech Engn, Chungli 32054, Taiwan
关键词
D O I
暂无
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The effect of various water quenching temperature and duration time of precipitation hardened Al-7Si-0.65Mg cast alloy is investigated by differential scanning calorimeter, electrical onductivity, hardness and tensile properties measurements. The results shows a positive response to 95 degrees C water quenched from solid solution treatment. The largest hardened rate can be obtained at 95 degrees C water-quenching for 60 minutes duration time in natural aging. The tensile strength and hardness following 95 degrees C quenched is found to be higher than that 25 degrees C and 60 degrees C water quenched in the shorter artificial aging time. High temperature water-quenching parameters available to high temperature(>180 degrees C) artificial aging treatment with the shorter aging time.
引用
收藏
页码:959 / 964
页数:6
相关论文
共 50 条
  • [31] Effect of Various Mg/Si Ratios on Microstructure and Structural Properties of Thixoextruded Al-Si-Mg Alloys
    Abeyram M. Nithin
    M. J. Davidson
    C. S. P. Rao
    Silicon, 2022, 14 : 11675 - 11686
  • [32] Effect of strontium on crystallization of Mg2Si phase in Al-Si-Mg casting alloys
    廖恒成
    丁毅
    孙国雄
    Transactions of Nonferrous Metals Society of China, 2002, (03) : 409 - 413
  • [33] Effect of strontium on crystallization Of Mg2Si phase in Al-Si-Mg casting alloys
    Liao, HC
    Ding, Y
    Sun, GX
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2002, 12 (03) : 409 - 413
  • [34] Effect of Various Mg/Si Ratios on Microstructure and Structural Properties of Thixoextruded Al-Si-Mg Alloys
    Nithin, Abeyram M.
    Davidson, M. J.
    Rao, C. S. P.
    SILICON, 2022, 14 (17) : 11675 - 11686
  • [35] Effect of strontium on crystallization of Mg2Si phase in Al-Si-Mg casting alloys
    Liao, Heng-Cheng
    Ding, Yi
    Sun, Guo-Xiong
    Transactions of Nonferrous Metals Society of China (English Edition), 2002, 12 (03): : 409 - 413
  • [36] The Influence of Precipitation Hardening on the Damping Capacity in Al-Si-Mg Cast Components at Different Strain Amplitudes
    Carneiro, Vitor H.
    Grilo, Jose
    Soares, Delfim
    Duarte, Isabel
    Puga, Helder
    METALS, 2022, 12 (05)
  • [37] The fracture mode in Al-Si-Mg casting alloys
    Wang, QG
    Caceres, CH
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 241 (1-2): : 72 - 82
  • [38] Metallographic investigation of Al-Si-Mg and Al-Si-Cu alloys
    Kovacheva, Rosiza
    Praktische Metallographie/Practical Metallography, 1993, 30 (02): : 68 - 81
  • [39] Effect of Mg Content on the Shear Strength of Al-Si-Mg and Al-Si-Cu Alloys at Elevated Temperatures
    Belke, Jacob A.
    Sanders, Paul G.
    INTERNATIONAL JOURNAL OF METALCASTING, 2025, 19 (02) : 717 - 725
  • [40] Effect of Sn addition on age-hardening and precipitation behavior of Al-Mg-Si alloys with different Mg/Si ratios
    Tu, Wenbin
    Tang, Jianguo
    Wang, Shanlin
    Ma, Lehang
    Zhao, Yan
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2023, 51 (10): : 68 - 75