Effect of Sn addition on age-hardening and precipitation behavior of Al-Mg-Si alloys with different Mg/Si ratios

被引:0
|
作者
Tu, Wenbin [1 ,2 ]
Tang, Jianguo [2 ]
Wang, Shanlin [1 ]
Ma, Lehang [2 ]
Zhao, Yan [2 ]
机构
[1] Nanchang Hangkong Univ, Jiangxi Key Lab Forming & Joining Technol Aerosp C, Nanchang 330063, Peoples R China
[2] Cent South Univ, Sch Mat Sci & Engn, Changsha 410083, Peoples R China
来源
关键词
Al-Mg-Sialloy; Mg/Siratio; agingprecipitation; Snaddition; ATOM-PROBE TOMOGRAPHY; EVOLUTION;
D O I
10.11868/j.issn.1001-4381.2022.000399
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of Sn addition on age-hardening and precipitation behavior of Al-Mg-Si alloy with different Mg/Si ratios was investigated by using the hardness test and TEM characterization. The results indicate that the addition of Sn increases the number density of precipitates of the peak-aged alloy with low Mg/Si ratio, but decreases the precipitation rate of beta ''. Hence, the hardening rate and peak aging hardness of alloy with low Mg/Si ratio decrease by the addition of Sn. During over-aging, the high precipitate densities of Sn-added alloy improve the over aging hardness of the alloy with low Mg/Si ratio. For alloy with high Mg/Si ratio, the addition of Sn not only increases the precipitate density, but also enhances the precipitation rates of beta ''. Therefore, the hardening rate and peak-aging hardness of alloy with high Mg/Si ratio increase by the addition of Sn.
引用
收藏
页码:68 / 75
页数:8
相关论文
共 33 条
  • [1] Effects of cluster characteristics on two-step aging behavior in Al-Mg-Si alloys with different Mg/Si ratios and natural aging periods
    Aruga, Yasuhiro
    Kim, SeongNyeong
    Kozuka, Masaya
    Kobayashi, Equo
    Sato, Tatsuo
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 718 : 371 - 376
  • [2] Formation and reversion of clusters during natural aging and subsequent artificial aging in an Al-Mg-Si alloy
    Aruga, Yasuhiro
    Kozuka, Masaya
    Takaki, Yasuo
    Sato, Tatsuo
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 631 : 86 - 96
  • [3] The precipitation sequence in Al-Mg-Si alloys
    Edwards, GA
    Stiller, K
    Dunlop, GL
    Couper, MJ
    [J]. ACTA MATERIALIA, 1998, 46 (11) : 3893 - 3904
  • [4] 3D modelling of β" in Al-Mg-Si: Towards an atomistic level ab initio based examination of a full precipitate enclosed in a host lattice
    Ehlers, F. J. H.
    Dumoulin, S.
    Holmestad, R.
    [J]. COMPUTATIONAL MATERIALS SCIENCE, 2014, 91 : 200 - 210
  • [5] Modeling of precipitation hardening for the naturally aged Al-Mg-Si-Cu alloy AA6111
    Esmaeili, S
    Lloyd, DJ
    Poole, WJ
    [J]. ACTA MATERIALIA, 2003, 51 (12) : 3467 - 3481
  • [6] A yield strength model for the Al-Mg-Si-Cu alloy AA6111
    Esmaeili, S
    Lloyd, DJ
    Poole, WJ
    [J]. ACTA MATERIALIA, 2003, 51 (08) : 2243 - 2257
  • [7] Solute clustering in Al-Mg-Si-Cu-(Zn) alloys during aging
    Guo, M. X.
    Zhang, Y. D.
    Li, G. J.
    Jin, S. B.
    Sha, G.
    Zhang, J. S.
    Zhuang, L. Z.
    Lavernia, E. J.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 774 : 347 - 363
  • [8] Effect of Zn addition on the precipitation behaviors of Al-Mg-Si-Cu alloys for automotive applications
    Guo, M. X.
    Zhang, X. K.
    Zhang, J. S.
    Zhuang, L. Z.
    [J]. JOURNAL OF MATERIALS SCIENCE, 2017, 52 (03) : 1390 - 1404
  • [9] Composition of β′ precipitates in Al-Mg-Si alloys by atom probe tomography and first principles calculations
    Hasting, Hakon S.
    Froseth, Anders G.
    Andersen, Sigmund J.
    Vissers, Rene
    Walmsley, John C.
    Marioara, Calin D.
    Danoix, Frederic
    Lefebvre, Williams
    Holmestad, Randi
    [J]. JOURNAL OF APPLIED PHYSICS, 2009, 106 (12)
  • [10] First-principles calculation of interaction energies between solutes and/or vacancies for predicting atomistic behaviors of microalloying elements in aluminum alloys
    Hirosawa, Shoichi
    Nakamura, Fumishige
    Sato, Tatsuo
    [J]. PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3, 2007, 561-565 : 283 - +