High Temperature Stability of Bulk Ti3AlC2 Materials in Air

被引：0
|
作者：
Lee, D. H. [1 ]
Lee, D. B. [1 ]
机构：
[1] Sungkyunkwan Univ, Ctr Adv Plasma Surface Technol, Suwon 440746, South Korea
来源：
THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS | 2007年 / 15-17卷
关键词：
Titanium aluminum carbide; sintering; chemical stability; oxidation;
D O I：
10.4028/www.scientific.net/AMR.15-17.410
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The high-temperature stability of Ti3AlC2 was investigated by subjecting Ti3AlC2 to cyclic oxidation conditions in air. Cyclic oxidation between 900 1200 degrees C for up to 100 hr resulted in the growth of matrix grains and the formation of the oxide layer that consisted of TiO2 and Al2O3. When the cyclic oxidation resistance was good, the oxide layer was thin and Al2O3-rich. When the cyclic oxidation resistance was bad, the oxide layer was thick and TiO2-rich. The oxidation rate Ti3AlC2 was not a direct function of oxidation temperature and grain size of the matrix.
引用
收藏
页码：410 / 415
页数：6
相关论文
共 50 条
  • [41] Microstructure and High-temperature Oxidation Behavior of Ti3AlC2/W Composites
    Cui, Bai
    Zapata-Solvas, Eugenio
    Reece, Michael J.
    Wang, Chang-An
    Lee, William E.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2013, 96 (02) : 584 - 591
  • [42] Insights into High-Temperature Uniaxial Compression Deformation Behavior of Ti3AlC2
    Zhang, Hui
    Wang, Xiaohui
    Wan, Peng
    Zhan, Xun
    Zhou, Yanchun
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2015, 98 (10) : 3332 - 3337
  • [43] Anisotropic arc erosion resistance of Ag/Ti3AlC2 composites induced by the alignment of Ti3AlC2
    Wang, Dan Dan
    Tian, Wu Bian
    Ding, Jian Xiang
    Ma, Ai Bin
    Zhu, Yong Fa
    Zhang, Pei Gen
    He, Wei
    Sun, Zheng Ming
    CORROSION SCIENCE, 2020, 171
  • [44] Comparison of Electrical Ablation Properties Between Pantograph Materials: Ti3AlC2 and Cu-Ti3AlC2
    Huang Xiaochen
    Feng Yi
    Qian Gang
    Ge Jinlong
    Zhang Xianfeng
    Wang Chuanhu
    RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (01) : 34 - 41
  • [45] Effect of Ti3AlC2 Content on Electrical Friction and Wear Behaviors of Cu–Ti3AlC2 Composites
    Hao Zhao
    Yi Feng
    Gang Qian
    Xiaochen Huang
    Shenshen Guo
    Xiaoyan Sun
    Tribology Letters, 2019, 67
  • [46] High-temperature oxidation behavior of un-dense Ti3AlC2 material at 1000 °C in air
    Ai, Taotao
    CERAMICS INTERNATIONAL, 2012, 38 (03) : 2537 - 2541
  • [47] Effect of Ti3AlC2 Content on Mechanical Properties of Ti3AlC2/ZA27 Composites
    Li Haiyan
    Zhou Yang
    Cui Ao
    Li Shibo
    Huang Zhenying
    Zhai Hongxiang
    RARE METAL MATERIALS AND ENGINEERING, 2018, 47 (04) : 1069 - 1074
  • [48] Prepared and mechanical properties of ternary layer Ti3AlC2 materials
    Fang S.-Q.
    Wang J.-H.
    Qiao Y.-J.
    Zhang H.-X.
    Liu M.
    Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2010, 31 (12): : 1679 - 1681
  • [49] Friction and wear behavior of bulk Ti3AlC2 under the lubrication of ethanol
    Jiang, Feng
    Ren, Shu-Fang
    Meng, Jun-Hu
    Lu, Jin-Jun
    Mocaxue Xuebao/Tribology, 2011, 31 (02): : 110 - 113
  • [50] Nb doping in Ti3AlC2: Effects on phase stability, high-temperature compressive properties, and oxidation resistance
    Zhang, Hui
    Li, Zhaojin
    Zhang, Chao
    Li, Jialin
    Wang, Xiaohui
    Zhou, Yanchun
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2017, 37 (11) : 3641 - 3645
12345