Microstructure, hardness, and shear behavior of Sn3.0Ag0.5Cu?Sn58Bi composite solder joint

被引：7

作者：

Liu, Yang ^{[1
]}

Liu, Li ^{[1
]}

Xu, Ruisheng ^{[1
]}

Sun, Fenglian ^{[1
]}

Zhu, Dongdong ^{[2
]}

Xu, Haitao ^{[2
]}

机构：

[1] Harbin Univ Sci & Technol, Sch Mat Sci & Engn, Harbin, Heilongjiang, Peoples R China

[2] Quzhou Univ, Key Lab Air Driven Equipment Technol Zhejiang Pro, Quzhou, Peoples R China

来源：

MATERIALS RESEARCH EXPRESS | 2019年 / 6卷 / 11期

基金：

中国国家自然科学基金;

关键词：

SnAgCu; SnBi; microstructure; hardness; shear behavior; MECHANICAL-PROPERTIES; RELIABILITY; EVOLUTION;

D O I：

10.1088/2053-1591/ab508e

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, Sn3.0Ag0.5Cu-Sn58Bi (SAC-SnBi) composite solder joint was obtained by two-step soldering process. The microstructure, hardness, and shear performance of the composite solder joint were investigated in comparison with the eutectic Sn58Bi (SnBi) and SnAgCu (SAC) solder joints. Experimental results showed that the SAC-SnBi had similar intermetallic compound (IMC) morphology and thickness with the SAC solder joints. Compared with the eutectic SnBi solder, the large Bi-rich matrix transforms into tiny Bi-rich grains in the SAC-SnBi solder bulk. Tiny Bi-rich grains, Cu6Sn5, and Ag3Sn distribute uniformly in the composite solder bulk. As the SnBi bulk melts into the SAC solder during the second soldering process, the formation and growth of large ?-Sn dendritic in SAC solder is suppressed in the composite solder. Therefore, the SAC-SnBi composite joint shows higher hardness and shear strength than the other two.

引用

页数：7

共 50 条

[21] Size effect on microstructure and tensile properties of Sn3.0Ag0.5Cu solder joints
Wang, Shaobin
Yao, Yao
Long, Xu
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2017, 28 (23) : 17682 - 17692
[22] Size effect on microstructure and tensile properties of Sn3.0Ag0.5Cu solder joints
Shaobin Wang
Yao Yao
Xu Long
Journal of Materials Science: Materials in Electronics, 2017, 28 : 17682 - 17692
[23] Effects of the intermetallic compound microstructure on the tensile behavior of Sn3.0Ag0.5Cu/Cu solder joint under various strain rates
An, Tong
Qin, Fei
MICROELECTRONICS RELIABILITY, 2014, 54 (05) : 932 - 938
[24] Size effect of Sn3.0Ag0.5Cu solder joint on intermetallic layer growth
Wang, Shaobin
Yao, Yao
2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 1547 - 1551
[25] Effects of cobalt nanoparticle on microstructure of Sn58Bi solder joint
Bashir, Muhammad Nasir
Haseeb, A. S. M. A.
Naher, Sumsun
Ali, Muhammad Mahmood
Bashir, Mohamed Bashir Ali
Zaidi, Asad A. A.
Jamshaid, Muhammad
Javed, Iqra
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2023, 34 (04)
[26] Interfacial reactions and microstructural evolution of BGA structure Cu/Sn3.0Ag0.5Cu/Sn58Bi/Cu mixed assembly joints during isothermal aging
Huang, Lia-Qiang
Zhou, Min-Bo
Zhang, Xin-Ping
2016 17TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2016, : 968 - 973
[27] The influences of Ag nanoparticles on voids growth and solderability about Sn3.0Ag0.5Cu/Cu solder joint
Zhao, Lingyan
Bai, Hailong
Gu, Xin
Liang, Huaxin
Yang, Hongwei
Yan, Jikang
MATERIALS RESEARCH EXPRESS, 2024, 11 (05)
[28] Effect of Rapid Thermal Fatigue on Microstructure and Properties of Sn3.0Ag0.5Cu/Cu Solder Bumps
Tian, Mizhe
Gan, Guisheng
Cao, Huadong
Yang, Donghua
Jiang, Liujie
Xia, Daquan
Sun, Pengfei
Liu, Xin
Wu, Yiping
2020 21ST INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2020,
[29] VOLUME EFFECT OF SHEAR FRACTURE BEHAVIOR OF Sn3.0Ag0.5Cu/Cu LEAD-FREE SOLDER JOINTS
Tian Yanhong
Yang Shihua
Wang Chunqing
Wang Xuelin
Lin Pengrong
ACTA METALLURGICA SINICA, 2010, 46 (03) : 366 - 371
[30] Effect of deep cryogenic treatment on mechanical properties and microstructure of Sn3.0Ag0.5Cu solder
Yao Yao
Xiao Li
Xu He
Journal of Materials Science: Materials in Electronics, 2018, 29 : 4517 - 4525

← 1 2 3 4 5 →