A study on Deformation and Densification characteristics of P/M Fe-C-Mn alloy Steels under cold upset

被引：2

作者：

Vishnuraj, J. T. ^{[1
]}

Kandavel, T. K. ^{[1
]}

Kishan, I. Sai ^{[1
]}

Akash, G. ^{[1
]}

机构：

[1] SASTRA Univ, Sch Mech Engn, Shanmugha Arts Sci Technol & Res Acad, Thanjavur 613401, Tamil Nadu, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 08期

关键词：

Powder metallurgy; Sintering; Deformation; Densification; Plain carbon steel; cold upsetting; MECHANICAL-PROPERTIES; SINTERED IRON; MICROSTRUCTURE;

D O I：

10.1016/j.matpr.2018.06.039

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The present investigation has been undertaken to study the deformation and densification characteristics of Mn added P/M plain carbon steel. Cold upsetting was carried out on the sintered preforms of Fe-0.2%C, Fe-0.2%C-0.5%Mn, Fe-0.2%C-2.0%Mn low alloy steels using flat dies. Dimensional changes of the preforms after uniform incremental loads were accurately measured and the density was also evaluated. Further, the photomicrographs of the alloy steels reveal that addition of Mn leads to the formation of undissolved carbides in the grain structure. Increased Mn content leads to work hardening effect during cold deformation thereby reducing the deformation as well as densification. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：16740 / 16747

页数：8

共 47 条

[21] Study of the deformation mechanisms of TWIP steels (Fe-Mn-C) by X-Ray diffraction
Collet, J. -L.
Bley, F.
Deschamps, A.
Scott, C.
THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2007, 15-17 : 822 - 827
[22] The P/M of 58Fe-30Mn-11Al-1C alloy
Chang, SC
Yan, SN
Lin, CS
POWDER MATERIALS: CURRENT RESEARCH AND INDUSTRIAL PRACTICES, 1999, : 269 - 280
[23] Experimental study on dry sliding wear behaviour of sintered Fe-C-W P/M low alloy Steels
Prabu, S. Senthur
Choudhary, Ayush
Jain, Anshul
Sharma, Ashu
INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 809 - 816
[24] Microstructure and texture characteristics of the metastable Fe-21Mn-3Si-3Al alloy after cold deformation
Kowalska, Joanna
Ratuszek, Wiktoria
Witkowska, Malgorzata
Zielniska-Lipiec, Anna
Tokarski, Tomasz
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 643 : S39 - S45
[25] Microstructure and texture characteristics of the metastable Fe-21Mn-3Si-3Al alloy after cold deformation
Kowalska, Joanna
Ratuszek, Wiktoria
Witkowska, Malgorzata
Zielińska-Lipiec, Anna
Tokarski, Tomasz
Journal of Alloys and Compounds, 2015, 643 (S1)
[26] Study of partition to non-partition transition of austenite growth along pearlite lamellae in near-eutectoid Fe-C-Mn alloy
Li, S.
Yang, Z. N.
Enomoto, M.
Yang, Z. -G.
ACTA MATERIALIA, 2019, 177 : 198 - 208
[27] Analysis of the Grain Size Evolution for Ferrite Formation in Fe-C-Mn Steels Using a 3D Model Under a Mixed-Mode Interface Condition
Fang, H.
Mecozzi, M. G.
Bruck, E.
van der Zwaag, S.
van Dijk, N. H.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (01): : 41 - 53
[28] Analysis of the Grain Size Evolution for Ferrite Formation in Fe-C-Mn Steels Using a 3D Model Under a Mixed-Mode Interface Condition
H. Fang
M. G. Mecozzi
E. Brück
S. van der Zwaag
N. H. van Dijk
Metallurgical and Materials Transactions A, 2018, 49 : 41 - 53
[29] The role of molybdenum on evolution of deformation texture in the cold rolled Fe30Mn5Al1C-xMo lightweight austenitic steels
Kotla, Sairam
Sabat, R. K.
Phaniraj, M. P.
Korla, Rajesh
VACUUM, 2023, 212
[30] Investigations on dry sliding wear behaviour of Sintered/Extruded P/M Alloy Steels (Fe-C-W-Ti)
Prabu, S. Senthur
Prathiba, S.
Asokan, M. A.
Jain, Anshul
Jain, Neeraj Kumar
Chourasiya, Pratyush Kumar
12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 2119 - 2126

← 1 2 3 4 5 →