Development of Polymer Nanocomposites for Rapid Prototyping Process

被引：0
|
作者：
Wahab, M. S. [1 ]
Dalgarno, H. W. [2 ]
Cochrane, R. F. [3 ]
Hassan, S. [1 ]
机构：
[1] Univ Tun Hussein Onn Malaysia, Dept Ind & Mfg Engn, Fac Mech Mfg Technol, Batu Pahat 86400, Johor, Malaysia
[2] Univ Leeds, Sch Mech Engn, Leeds LS2 9JT, W Yorkshire, England
[3] Univ Leeds, Sch Proc Environm & Mat Engn, Leeds, W Yorkshire, England
来源：
WORLD CONGRESS ON ENGINEERING 2009, VOLS I AND II | 2009年
关键词：
Rapid Manufacturing (RM); Layer Manufacturing (LM); Selective Laser Sintering (SLS); Polymer nanocomposite (PNC); TECHNOLOGIES;
D O I：
暂无
中图分类号：
TP301 [理论、方法];
学科分类号：
081202 ;
摘要：
This paper presents initial development of polymer nanocomposites (PNC) material for rapid manufacturing (RM) application. PNC materials containing it polyamide (PA) and nano particles (5wt%) were produced by solution blending with the aim to improve the mechanical properties. Commercial polyamide 6 (PA6) was dissolved in formic acid (HCO2H) together with two different types of nano particle materials: yttrium stabilised zirconia (YSZ) anal Hectorite clay (Benton 166) and spray-dried to create powder, creating powder with particle sires in the range of Ill-all Pin. The materials were processed on a CO2 selective laser sintering (SLS) experimental machine. Mechanical properties of the PNCs were evaluated anti the results were compared with the unfilled base polymer.
引用
收藏
页码：1499 / +
页数：2
相关论文
共 50 条
  • [41] Rapid prototyping in collaborative architectural design process
    Pupo, Regiane
    Ruschel, Regina
    Andrade, Max
    INNOVATIVE DEVELOPMENTS ON VIRTUAL AND PHYSICAL PROTOTYPING, 2012, : 845 - 848
  • [42] RAPID PROTOTYPING USING THE SELECTIVE SINTERING PROCESS
    JUSTER, NP
    ASSEMBLY AUTOMATION, 1994, 14 (02) : 14 - 17
  • [43] Ceramic microcomponents by rapid prototyping process chains
    Knitter, R
    Bauer, W
    Göhring, D
    Risthaus, P
    RAPID PROTOTYPING, TOOLING AND MANUFACTURING, 2002, : 131 - 138
  • [44] Rapid prototyping by reactive extrusion:: Mixing process
    Rocha, A
    Marques, S
    Mateus, AJ
    Bártolo, PJ
    VIRTUAL MODELING AND RAPID MANUFACTURING: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2005, : 475 - 482
  • [45] A study of part placement for rapid prototyping process
    Yang, YN
    Leep, HR
    Parsaei, HR
    Chang, DJ
    6TH INDUSTRIAL ENGINEERING RESEARCH CONFERENCE PROCEEDINGS: (IERC), 1997, : 385 - 390
  • [46] Microfabrication of ceramics by rapid prototyping process chains
    Knitter, R
    Bauer, W
    Göhring, D
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2003, 217 (01) : 41 - 51
  • [47] Evaluation of a rapid prototyping process for silicon microstructures
    Bange, S
    Herding, M
    Woias, P
    MICROMACHINING AND MICROFABRICATION PROCESS TECHNOLOGY VIII, 2003, 4979 : 593 - 600
  • [48] Ceramic microfabrication by rapid prototyping process chains
    R. Knitter
    W. Bauer
    Sadhana, 2003, 28 : 307 - 318
  • [49] Rapid prototyping and physical modelling in the development of a new additive manufacturing process for aluminium alloys
    Blindheim, Jorgen
    Welo, Torgeir
    Steinert, Martin
    47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47), 2019, 34 : 489 - 496
  • [50] Rapid prototyping technology: applications and benefits for rapid product development
    S. O. Onuh
    Y. Y. Yusuf
    Journal of Intelligent Manufacturing, 1999, 10 : 301 - 311
12345