Development of Polymer Nanocomposites for Rapid Prototyping Process

被引：0
|
作者：
Wahab, M. S. [1 ]
Dalgarno, H. W. [2 ]
Cochrane, R. F. [3 ]
Hassan, S. [1 ]
机构：
[1] Univ Tun Hussein Onn Malaysia, Dept Ind & Mfg Engn, Fac Mech Mfg Technol, Batu Pahat 86400, Johor, Malaysia
[2] Univ Leeds, Sch Mech Engn, Leeds LS2 9JT, W Yorkshire, England
[3] Univ Leeds, Sch Proc Environm & Mat Engn, Leeds, W Yorkshire, England
来源：
WORLD CONGRESS ON ENGINEERING 2009, VOLS I AND II | 2009年
关键词：
Rapid Manufacturing (RM); Layer Manufacturing (LM); Selective Laser Sintering (SLS); Polymer nanocomposite (PNC); TECHNOLOGIES;
D O I：
暂无
中图分类号：
TP301 [理论、方法];
学科分类号：
081202 ;
摘要：
This paper presents initial development of polymer nanocomposites (PNC) material for rapid manufacturing (RM) application. PNC materials containing it polyamide (PA) and nano particles (5wt%) were produced by solution blending with the aim to improve the mechanical properties. Commercial polyamide 6 (PA6) was dissolved in formic acid (HCO2H) together with two different types of nano particle materials: yttrium stabilised zirconia (YSZ) anal Hectorite clay (Benton 166) and spray-dried to create powder, creating powder with particle sires in the range of Ill-all Pin. The materials were processed on a CO2 selective laser sintering (SLS) experimental machine. Mechanical properties of the PNCs were evaluated anti the results were compared with the unfilled base polymer.
引用
收藏
页码：1499 / +
页数：2
相关论文
共 50 条
  • [31] RAPID PROTOTYPING KEY TO FAST DEVELOPMENT
    STUDT, T
    R&D MAGAZINE, 1994, 36 (06): : 55 - 56
  • [32] Process analysis for rapid tooling technology based on rapid prototyping
    Liu Hongpu
    Su Jun
    Li Xiaojing
    OPTICAL, ELECTRONIC MATERIALS AND APPLICATIONS, PTS 1-2, 2011, 216 : 798 - 803
  • [33] In-process control in thermal rapid prototyping
    Doumanidis, CC
    IEEE CONTROL SYSTEMS MAGAZINE, 1997, 17 (04): : 46 - 54
  • [34] Optimization of stereolithography process parameters in rapid prototyping
    Campanelli, S.
    Giannoccaro, R.
    Ludovico, A. D.
    Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium: INTELLIGENT MANUFACTURING & AUTOMATION: FOCUS ON RECONSTRUCTION AND DEVELOPMENT, 2003, : 77 - 78
  • [35] Ceramic microfabrication by rapid prototyping process chains
    Knitter, R
    Bauer, W
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2003, 28 (1-2): : 307 - 318
  • [36] Rapid prototyping in the intervertebral implant design process
    Domanski, Janusz
    Skalski, Konstanty
    Grygoruk, Roman
    Mroz, Adrian
    RAPID PROTOTYPING JOURNAL, 2015, 21 (06) : 735 - 746
  • [37] Rapid prototyping process using metal directly
    Ribeiro, AF
    Norrish, J
    SOLID FREEFORM FABRICATION PROCEEDINGS, SEPTEMBER 1996, 1996, : 249 - 256
  • [38] Digital fabrication and rapid prototyping as a generative process
    Coutinho, Filipe
    Kruger, Mario
    Duarte, Jose P.
    GREEN DESIGN, MATERIALS AND MANUFACTURING PROCESSES, 2013, : 509 - 512
  • [39] A rapid prototyping process chain for ceramic microcomponents
    Risthaus, P
    Göhring, D
    Knitter, R
    EURO CERAMICS VII, PT 1-3, 2002, 206-2 : 337 - 340
  • [40] Advanced process planning for subtractive rapid prototyping
    Petrzelka, Joseph E.
    Frank, Matthew C.
    RAPID PROTOTYPING JOURNAL, 2010, 16 (03) : 216 - 224
12345