Development of Polymer Nanocomposites for Rapid Prototyping Process

被引：0
|
作者：
Wahab, M. S. [1 ]
Dalgarno, H. W. [2 ]
Cochrane, R. F. [3 ]
Hassan, S. [1 ]
机构：
[1] Univ Tun Hussein Onn Malaysia, Dept Ind & Mfg Engn, Fac Mech Mfg Technol, Batu Pahat 86400, Johor, Malaysia
[2] Univ Leeds, Sch Mech Engn, Leeds LS2 9JT, W Yorkshire, England
[3] Univ Leeds, Sch Proc Environm & Mat Engn, Leeds, W Yorkshire, England
来源：
WORLD CONGRESS ON ENGINEERING 2009, VOLS I AND II | 2009年
关键词：
Rapid Manufacturing (RM); Layer Manufacturing (LM); Selective Laser Sintering (SLS); Polymer nanocomposite (PNC); TECHNOLOGIES;
D O I：
暂无
中图分类号：
TP301 [理论、方法];
学科分类号：
081202 ;
摘要：
This paper presents initial development of polymer nanocomposites (PNC) material for rapid manufacturing (RM) application. PNC materials containing it polyamide (PA) and nano particles (5wt%) were produced by solution blending with the aim to improve the mechanical properties. Commercial polyamide 6 (PA6) was dissolved in formic acid (HCO2H) together with two different types of nano particle materials: yttrium stabilised zirconia (YSZ) anal Hectorite clay (Benton 166) and spray-dried to create powder, creating powder with particle sires in the range of Ill-all Pin. The materials were processed on a CO2 selective laser sintering (SLS) experimental machine. Mechanical properties of the PNCs were evaluated anti the results were compared with the unfilled base polymer.
引用
收藏
页码：1499 / +
页数：2
相关论文
共 50 条
  • [21] Rapid Tooling-Rapid Abrading Process Integratedwith Rapid Prototyping
    Wulanmuqi Deng Jiati(State 863/CIMS Design Automation LaboratoryManufacturing System institute 720)(Beijing University of Aeronautics & AstronauticsBeijing 100083P.R.China)
    CADDM, 1999, (02) : 28 - 33
  • [22] INTEGRATION OF RAPID PROTOTYPING INTO PRODUCT DEVELOPMENT
    ATWOOD, CL
    MCCARTY, GD
    PARDO, BT
    BRYCE, EA
    TOWARDS WORLD CLASS MANUFACTURING 1993, 1994, 17 : 339 - 348
  • [23] Rapid prototyping technique and its development
    Zhang Jian
    Rui Yannian
    Chen jie
    3rd China-Japan Conference on Mechatronics 2006 Fuzhou, 2006, : 373 - 376
  • [24] RAPID PROTOTYPING SPEEDS PRODUCT DEVELOPMENT
    BELFORTE, DA
    LASER FOCUS WORLD, 1993, 29 (06): : 126 - &
  • [25] Rapid prototyping boost in research and development
    Macúchová K.
    Melichar M.
    Crha P.
    Heřmánek J.
    Macúchová, Karolina (karolina.macuchova@hilase.cz), 1600, Cefin Publishing House (01): : 88 - 90
  • [26] Rapid prototyping for automotive systems development
    Spreng, M
    Fuchs, M
    Grazebrook, A
    ELECTRONIC ENGINEERING, 1996, 68 (831): : 100 - &
  • [27] Rapid prototyping key to fast development
    Research & Development (Barrington, Illinois), 1994, 36 (06):
  • [28] Development of a new rapid prototyping interface
    Jacob, GGK
    Chua, CK
    Tong, M
    COMPUTERS IN INDUSTRY, 1999, 39 (01) : 61 - 70
  • [29] Development and tendency of rapid prototyping technology
    Yan, YN
    Hong, GD
    LASER PROCESSING OF MATERIALS AND INDUSTRIAL APPLICATIONS II, 1998, 3550 : 298 - 306
  • [30] RPC AG - Rapid development of rapid prototyping chemicals
    Hofmann, M
    Steinmann, B
    CHIMIA, 2000, 54 (04) : 211 - 214
12345