Connecting an Embedded Generator to an Existing Facility in Singapore Power Grid

被引：0

作者：

Xuan, Tan Xiao ^{[1
]}

Logenthiran, T. ^{[1
]}

Yathunanthan, K. ^{[2
]}

Amirthan, P. ^{[2
]}

机构：

[1] Newcastle Univ, Sch Elect & Elect Engn, Singapore, Singapore

[2] YHW LLP, Singapore, Singapore

来源：

PROCEEDINGS OF THE 2016 IEEE REGION 10 CONFERENCE (TENCON) | 2016年

关键词：

Singapore power industry; connection of distributed generators; embedded generation; rules and regulations; power system consultant;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Introduction of Embedded Generation to the power generation is a recent innovative change happening in Singapore. Distributed generation, normally referred as Embedded Generation in Singapore can be implanted at customers' premises for their own use of electricity. This paper presents how Singapore ensures a safe and secure power system network on connecting embedded generation in parallel to the main power grid. This research project was carried out under the supervision of a registered Professional Engineer (PE) from Singapore together with an academic Professor. A pharmaceutical company from Singapore has been taken as a client for this project. First, detailed studies have been done on their existing electrical network of the client. Then a feasibility, research has been done for satisfying the expectations of the client based on the rules and regulations of Singapore power industry. ETAP is a power system simulation software which is one of the industrially accepted software has been used for the analysis of technical parameters. After comprehensive studies and analysis, the client has been given recommendations for connecting a new embedded generator at their premise in parallel with the Singapore power grid.

引用

页码：1190 / 1193

页数：4

共 50 条

[21] Incorporation of a 25 MW gas turbine into an existing power station employing the existing generator
Hansen, O.
Schwarzfischer, St.
VGB Kraftwerkstechnik, 1996, 76 (04):
[22] Connecting sensors, embedded devices on low-power networks
不详
CONTROL ENGINEERING, 2008, 55 (06) : 36 - 36
[23] Aquila taps existing facility and used diesels for peak power
Krepps, R
Biondolillo, C
POWER, 2003, 147 (01) : 57 - +
[24] Connecting Wind Power Plant with Weak Grid - Challenges and Solutions
Zhou, Y.
Nguyen, D. D.
Kjaer, P. C.
Saylors, S.
2013 IEEE POWER AND ENERGY SOCIETY GENERAL MEETING (PES), 2013,
[25] Design and Experience of Grid-connecting Photovoltaic Power System
Wang Jianqiang
Li Jingxin
2008 IEEE INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY TECHNOLOGIES (ICSET), VOLS 1 AND 2, 2008, : 607 - 610
[26] Technical conditions for connecting autonomous power stations to the French grid
Schmerber, C
HOUILLE BLANCHE-REVUE INTERNATIONALE DE L EAU, 1999, 54 (01): : 35 - 43
[27] Windmill modeling consideration and factors influencing the stability of a grid-connected wind power-based embedded generator
Salman, SK
Teo, ALJ
IEEE TRANSACTIONS ON POWER SYSTEMS, 2003, 18 (02) : 793 - 802
[28] Power control of a doubly fed induction generator connected to the power grid
Lopez-Garcia, I
Espinosa-Perez, G.
Cardenas, V
INTERNATIONAL JOURNAL OF CONTROL, 2019, 92 (07) : 1471 - 1480
[29] Embedded Low Power Clock Generator for Sensor Nodes
Schrape, Oliver
Vater, Frank
2012 NORCHIP, 2012,
[30] Induction generator with multilevel inverters working with the power grid
Kasprowicz, Andrzej
PRZEGLAD ELEKTROTECHNICZNY, 2018, 94 (11): : 159 - 165

← 1 2 3 4 5 →