Study on Cutting Mechanism and Cutting Performance of Machining for Curved Surface by Ball End Mill using 3D-CAD

被引：2

作者：

Iwabe, Hiroyasu ^{[1
]}

Miwa, Hideki ^{[2
]}

机构：

[1] Niigata Univ, Grad Sch Sci & Technol, Nishi Ku, Niigata 9502181, Japan

[2] Niigata Transys Co, Seirou Town 9570101, Japan

来源：

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING | 2008年 / 2卷 / 04期

关键词：

Ball End Mill; Cutting Mechanism; 3D-CAD; Chip Area; Curved Surface; Cutting Performance; Looped Cutter Path Machining Method;

D O I：

10.1299/jamdsm.2.513

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper deals with the cutting mechanism and cutting performance by ball end milling of curved surface. Firstly, the modeling of a cutter and a workpiece with a concave curved surface are carried out using 3D-CAD. Secondly, the chip area is calculated by the interference of the rake surface and the chip volume removed by a single cutting operation. The maximum chip area shows transitional phenomenon, then a new cutting method such as a looped cutter path machining is proposed and the effectiveness of the new method is considered and verified using the evaluation value which is calculated by the multiplication of the chip and the length from Z axis to the gravity of the chip area.

引用

页码：513 / 521

页数：9

共 50 条

[1] Analysis of cutting mechanism of ball end mill using 3D-CAD (chip area by inclined surface machining and cutting performance based on evaluation value)
Iwabe, Hiroyasu
Shimizu, Keisuke
Sasaki, Minoru
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2006, 72 (01): : 247 - 254
[2] Analysis of cutting mechanism by ball end mill using 3D-CAD (Chip area by inclined surface machining and cutting performance based on evaluation value)
Iwabe, H
Shimizu, K
Sasaki, M
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 2006, 49 (01) : 28 - 34
[3] STUDY ON CUTTING PERFORMANCE OF RADIUS END MILL WITH TITANIUM ALLOY -Analysis of Chip Area using 3D-CAD and Experiments of Inclined Surface with Contouring-
Iwabe, Hiroyasu
Futakawa, Masanori
Fujiwara, Masashige
PROGRESS OF MACHINING TECHNOLOGY, 2012, : 179 - +
[4] Ball End Mill with Curved Cutting Edge and Constant Cutting Geometry
Ryabov E.A.
Khisamutdinov R.M.
Grechishnikov V.A.
Yurasov S.Y.
Yurasova O.I.
Russian Engineering Research, 2018, 38 (12) : 1015 - 1017
[5] Study on cutting mechanism and cutting performance of inclined surface machining with radius end mill: Comparison with cutting method of contouring path and scanning path
Iwabe, Hiroyasu
Kikuchi, Kyouhei
Futakawa, Masanori
Kazama, Yusaku
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2015, 81 (07): : 655 - 660
[6] The high-performance machining of the curved surfaces with the progressive cutting geometry of the end mill
Khramov, Alexander
Kiselev, Evgeniy
Leksin, Evgeniy
INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE 2017), 2017, 129
[7] Investigation of the Mechanism of Cutting by the Ball End Mill Tip and Its Influences on the Surface Topography and the Cutting Force
Regaieg, Amine
Belguith, Rami
Sai, Lotfi
DESIGN AND MODELING OF MECHANICAL SYSTEMS-VI, VOL 2, CMSM 2023, 2024, : 371 - 381
[8] An investigation of cutting forces in machining with worn ball-end mill
Ben Said, M.
Sai, K.
Sai, W. Bouzid
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (07) : 3198 - 3217
[9] A Model of Cutting Forces for Ball End Mill in High Speed Machining
Yan, Bing
Xu, Chaohui
Wang, Wei
MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 3108 - +
[10] Study on performance of radius end milling titanium alloy (analysis of cutting cross-sectional area using 3D-CAD and experiments of inclined surface with contouring)
2013, Fuji Technology Press (07)

← 1 2 3 4 5 →