Study on Cutting Mechanism and Cutting Performance of Machining for Curved Surface by Ball End Mill using 3D-CAD

被引：2

作者：

Iwabe, Hiroyasu ^{[1
]}

Miwa, Hideki ^{[2
]}

机构：

[1] Niigata Univ, Grad Sch Sci & Technol, Nishi Ku, Niigata 9502181, Japan

[2] Niigata Transys Co, Seirou Town 9570101, Japan

来源：

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING | 2008年 / 2卷 / 04期

关键词：

Ball End Mill; Cutting Mechanism; 3D-CAD; Chip Area; Curved Surface; Cutting Performance; Looped Cutter Path Machining Method;

D O I：

10.1299/jamdsm.2.513

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper deals with the cutting mechanism and cutting performance by ball end milling of curved surface. Firstly, the modeling of a cutter and a workpiece with a concave curved surface are carried out using 3D-CAD. Secondly, the chip area is calculated by the interference of the rake surface and the chip volume removed by a single cutting operation. The maximum chip area shows transitional phenomenon, then a new cutting method such as a looped cutter path machining is proposed and the effectiveness of the new method is considered and verified using the evaluation value which is calculated by the multiplication of the chip and the length from Z axis to the gravity of the chip area.

引用

页码：513 / 521

页数：9

共 50 条

[41] STUDY ON ACCURACY IN END-MILL OPERATIONS .2. MACHINING ACCURACY IN SIDE CUTTING TESTS
MATSUBARA, T
TANAKA, H
MIZUMOTO, H
INTERNATIONAL JOURNAL OF THE JAPAN SOCIETY FOR PRECISION ENGINEERING, 1991, 25 (04): : 291 - 296
[42] A mechanistic cutting force model for 3D ball-end milling
Feng, HY
Su, N
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2001, 123 (01): : 23 - 29
[43] Prediction of Cutting Process with Curved-Edge End Mill (1st Report, Application of Ball End Milling Process in Energy Approach)
Matsumura, Takashi
Furuki, Toshimitsu
Usui, Eiji
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2003, 69 (12): : 3396 - 3402
[44] Cutting dynamics research on the five-axis machining of thin curved surface with barrel-taper-ball milling cutter
Jiang, Yufeng
Guo, Minglong
Du, Guocai
Wei, Zhaocheng
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 131 (7-8): : 3905 - 3919
[45] Cutting dynamics research on the five-axis machining of thin curved surface with barrel-taper-ball milling cutter
Yufeng Jiang
Minglong Guo
Guocai Du
Zhaocheng Wei
The International Journal of Advanced Manufacturing Technology, 2024, 131 : 3905 - 3919
[46] Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill
Masmiati, N.
Chan, H. S.
Sarhan, Ahmed A. D.
Hassan, M. A.
Hamdi, M.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2014, 2014
[47] 3D ball-end milling force model using instantaneous cutting force coefficients
Ko, JH
Cho, DW
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2005, 127 (01): : 1 - 12
[48] Study on chip removal mechanism of PCD ball-end milling (1st report) cutting simulation by orthogonal cutting
Kasuriya, Peerapong
Watanabe, Takeshi
Goto, Takashi
Jin, Masahiko
Production and Manufacturing Research, 2020, 8 (01): : 488 - 497
[49] INFLUENCE OF TOOL PATH WHEN GROOVE SHAPE MACHINING USING CERAMIC END MILL ON TOOL CUTTING EDGE
Hasegawa, Masanobu
Ichikawa, Kohei
PROCEEDINGS OF THE JSME 2020 CONFERENCE ON LEADING EDGE MANUFACTURING/MATERIALS AND PROCESSING, LEMP2020, 2020,
[50] Study on cutting force and surface topography of screw rotor ball end milling process based on normal cutting depth iteration algorithm
Shen, Zhihuang
Cai, Sijie
Hou, Dapan
Chen, Shuixuan
Jiang, Tao
Ye, Xianzhen
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 134 (3-4): : 1863 - 1878

← 1 2 3 4 5 →