Study on Cutting Mechanism and Cutting Performance of Machining for Curved Surface by Ball End Mill using 3D-CAD

被引：2

作者：

Iwabe, Hiroyasu ^{[1
]}

Miwa, Hideki ^{[2
]}

机构：

[1] Niigata Univ, Grad Sch Sci & Technol, Nishi Ku, Niigata 9502181, Japan

[2] Niigata Transys Co, Seirou Town 9570101, Japan

来源：

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING | 2008年 / 2卷 / 04期

关键词：

Ball End Mill; Cutting Mechanism; 3D-CAD; Chip Area; Curved Surface; Cutting Performance; Looped Cutter Path Machining Method;

D O I：

10.1299/jamdsm.2.513

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper deals with the cutting mechanism and cutting performance by ball end milling of curved surface. Firstly, the modeling of a cutter and a workpiece with a concave curved surface are carried out using 3D-CAD. Secondly, the chip area is calculated by the interference of the rake surface and the chip volume removed by a single cutting operation. The maximum chip area shows transitional phenomenon, then a new cutting method such as a looped cutter path machining is proposed and the effectiveness of the new method is considered and verified using the evaluation value which is calculated by the multiplication of the chip and the length from Z axis to the gravity of the chip area.

引用

页码：513 / 521

页数：9

共 50 条

[31] Geometrical study on machining mechanism at center of ball-nosed end mill
Terai, Hisanobu
Hao, Minghui
Kikkawa, Koichi
Mizugaki, Yoshio
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2002, 68 (08): : 2457 - 2463
[32] Study on highly efficient machining by small-diameter radius end mill -cutting efficiency of face cutting and side cutting in high speed milling
Nakai H.
Iida Y.
Sawa T.
Anzai M.
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2019, 85 (04): : 365 - 373
[33] Study on vibration reduction mechanism of variable pitch end mill and cutting performance in milling titanium alloy
Huang, Panling
Li, Jianfeng
Sun, Jie
Zhou, Jun
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 67 (5-8): : 1385 - 1391
[34] Study on vibration reduction mechanism of variable pitch end mill and cutting performance in milling titanium alloy
Panling Huang
Jianfeng Li
Jie Sun
Jun Zhou
The International Journal of Advanced Manufacturing Technology, 2013, 67 : 1385 - 1391
[35] A constant cutting force control for finishing process of die and mold by using a ball end mill
Nishida, S
Kakino, Y
Sudo, K
Ohtsuka, H
Yamaji, I
Ibaraki, S
PROGRESS OF MACHINING TECHNOLOGY, 2004, : 610 - 615
[36] Prediction of cutting force for ball end mill in sculptured surface based on analytic model of CWE and ICCE
Wei, Z. C.
Guo, M. L.
Wang, M. J.
Li, S. Q.
Wang, J.
MACHINING SCIENCE AND TECHNOLOGY, 2019, 23 (05) : 688 - 711
[37] The Simulation of Cutting Force of Free-form Surface Machining with Ball-end Milling Cutter
Shi, Lei
Liu, En Fu
Zhang, Yi
Chen, Peng
Li, Zong Bin
2009 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, VOLS 1-4, 2009, : 2314 - +
[38] Comparative studies of variation in end mill radial rake angle and cutting conditions on cutting force and surface integrity during machining of nimonic 263
Gowthaman, S.
Jagadeesha, T.
MATERIALS RESEARCH EXPRESS, 2020, 7 (03)
[39] Study on the high-speed cutting for plastic mould steel using Ball End Mill of AlTiN coating layers
Kim, Jin-Woo
Lee, Seung-Chul
MECHANIKA, 2016, (04): : 303 - 307
[40] Influence of Cutting Conditions and End Mill Geometry on the Surface Quality in High-Speed Machining of Carbon Composites
Gordeev Y.I.
Binchurov A.S.
Yasinskii V.B.
Pikalov Y.Y.
Vakulin M.S.
Kazakov I.S.
Russian Engineering Research, 2023, 43 (05) : 592 - 597

← 1 2 3 4 5 →