Analysis of cutting mechanism of ball end mill using 3D-CAD (chip area by inclined surface machining and cutting performance based on evaluation value)

被引：0

作者：

Iwabe, Hiroyasu ^{[1
]}

Shimizu, Keisuke ^{[1
]}

Sasaki, Minoru ^{[1
]}

机构：

[1] Graduate School of Science and Technology, Niigata University, 8050 Ikarashi 2-nocho, Niigata-shi, Niigata, 950-2181, Japan

来源：

Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C | 2006年 / 72卷 / 01期

关键词：

D O I：

10.1299/kikaic.72.247

中图分类号：

学科分类号：

摘要：

引用

页码：247 / 254

共 14 条

[1] Analysis of cutting mechanism by ball end mill using 3D-CAD (Chip area by inclined surface machining and cutting performance based on evaluation value)
Iwabe, H
Shimizu, K
Sasaki, M
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 2006, 49 (01) : 28 - 34
[2] Study on Cutting Mechanism and Cutting Performance of Machining for Curved Surface by Ball End Mill using 3D-CAD
Iwabe, Hiroyasu
Miwa, Hideki
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2008, 2 (04): : 513 - 521
[3] STUDY ON CUTTING PERFORMANCE OF RADIUS END MILL WITH TITANIUM ALLOY -Analysis of Chip Area using 3D-CAD and Experiments of Inclined Surface with Contouring-
Iwabe, Hiroyasu
Futakawa, Masanori
Fujiwara, Masashige
PROGRESS OF MACHINING TECHNOLOGY, 2012, : 179 - +
[4] Study on performance of radius end milling titanium alloy (analysis of cutting cross-sectional area using 3D-CAD and experiments of inclined surface with contouring)
2013, Fuji Technology Press (07)
[5] Study on cutting mechanism and cutting performance of inclined surface machining with radius end mill: Comparison with cutting method of contouring path and scanning path
Iwabe, Hiroyasu
Kikuchi, Kyouhei
Futakawa, Masanori
Kazama, Yusaku
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2015, 81 (07): : 655 - 660
[6] Study on analysis of cutting mechanism and cutting performance by radius end mill (comparison with results of ball end milling of inclined surface in case of contouring pick feed method)
1811, Japan Society of Mechanical Engineers (79):
[7] Analysis of cutting forces and mechanism of chip formation in ball end milling of inclined surface (3rd report) -For upward or downward milling of inclined surface with pick-feed
Kasahara, Kazuo
Hirota, Akihiko
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2009, 75 (10): : 1216 - 1221
[8] Analysis of cutting forces and mechanism of chip formation in ball end milling of inclined surface (1st report) -geometric quantities in milling process, cutting model and preliminary examination
Kasahara, Kazuo
Hirota, Akihiko
Akama, Satoru
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2008, 74 (09): : 965 - 970
[9] THE PREDICTION OF DIMENSIONAL ERROR FOR SCULPTURED SURFACE PRODUCTIONS USING THE BALL-END MILLING PROCESS .1. CHIP GEOMETRY ANALYSIS AND CUTTING FORCE PREDICTION
LIM, EEM
FENG, HY
MENQ, CH
LIN, ZH
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1995, 35 (08): : 1149 - 1169
[10] Prediction of cutting forces during end milling using 3d fem based simulation analysis
Mugilan T.
Alwarsamy T.
International Journal of Vehicle Structures and Systems, 2020, 12 (01) : 26 - 30

← 1 2 →