TRIBOLOGICAL PROPERTIES OF 316L STAINLESS STEEL FABRICATED VIA METAL INJECTION MOLDING

被引：4
|
作者：
Zainon, Nurazilah Mohd [1 ]
Abdulah, Noorsyakirah [1 ]
Roslani, Norazlan [1 ]
Omar, Mohd Afian [1 ]
机构：
[1] SIRIM Berhad, Adv Mat Res Ctr AMREC, Struct Mat Program, Kulim 09000, Kedah, Malaysia
来源：
ADVANCED MATERIALS CONFERENCE (AMC 2012) | 2014年 / 879卷
关键词：
MIM; SS316L; Tribology; Friction Coefficient; Microstructure;
D O I：
10.4028/www.scientific.net/AMR.879.134
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tribological properties of sintered 316L stainless steel fabricated via injection molding were investigated. Tests were carried out at room temperature comparing metal injection molded dog bone tensile samples at different sintering temperatures. The parameter used for the pin on disk test is a 10kN load, 500m sliding distance and a chromium steel ball as a sliding partner. The morphologies and compositions of the worn surfaces were analyzed by SEM, Raman and XPS. The results showed that the wear mechanism and friction coefficient of SS316L depended strongly on the microstructure which was influenced by the sintering temperature.
引用
收藏
页码：134 / 138
页数：5
相关论文
共 50 条
  • [41] Influence of cathodic arc plasma titanizing on tribological properties of 316L stainless steel
    School of Engineering and Technology, China University of Geosciences , Beijing
    100083, China
    不详
    100083, China
    Xiyou Jinshu Cailiao Yu Gongcheng, 7 (1821-1825):
  • [42] Structural, mechanical and tribological properties of Ti and TiN coatings on 316L stainless steel
    Yazici, M.
    Kovaci, H.
    Yetim, A. F.
    Celik, A.
    CERAMICS INTERNATIONAL, 2018, 44 (12) : 14195 - 14201
  • [43] Effects of Different Thermoplastic Wax-based Binders on Properties of 316L Stainless Steel Injection Molding Parts
    Dou Yakun
    Feng Yi
    Huang Xiaochen
    Tang Hai
    Ding Dongdong
    Tian Pei
    Xia Meng
    Qian Gang
    Zhang Xuebin
    RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (10) : 2775 - 2780
  • [44] Effect of Cr2N on microstructure and properties of 316L stainless steel prepared by powder injection molding
    Zhu, Jie
    Zhou, Wan-Zhu
    Ma, Yu-Ping
    Weng, Ting
    Zeng, Ke-Li
    Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2015, 20 (06): : 978 - 982
  • [45] Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing
    Chen, Xiaohui
    Li, Jia
    Cheng, Xu
    He, Bei
    Wang, Huaming
    Huang, Zheng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 703 : 567 - 577
  • [46] Mechanical properties of 316L stainless steel fabricated by wire and arc additive manufacturing
    Zhao Y.
    Fan R.
    Liu Y.
    Wang Z.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2023, 44 (08): : 207 - 216
  • [47] Dynamic mechanical properties of 316L stainless steel fabricated by an additive manufacturing process
    Chen, Jie
    Wei, Haiyang
    Bao, Kuo
    Zhang, Xianfeng
    Cao, Yang
    Peng, Yong
    Kong, Jian
    Wang, Kehong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 11 (11): : 170 - 179
  • [48] Cryogenic mechanical properties of 316L stainless steel fabricated by selective laser melting
    Wang, Chao
    Lin, Xin
    Wang, Lilin
    Zhang, Shuya
    Huang, Weidong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 815
  • [49] Investigation of Microstructures and Tensile Properties of 316L Stainless Steel Fabricated via Laser Powder Bed Fusion
    Chepkoech, Melody
    Owolabi, Gbadebo
    Warner, Grant
    MATERIALS, 2024, 17 (04)
  • [50] Characterization and Rheological Studies on Ready-Made Feedstock of Stainless Steel 316L in Metal Injection Molding (MIM) Process
    Nor, N. H. Mohamad
    Ismail, M. H.
    Abu Kasim, N. A.
    Muhamad, N.
    Taib, M. A.
    4TH MECHANICAL AND MANUFACTURING ENGINEERING, PTS 1 AND 2, 2014, 465-466 : 709 - +
12345