TRIBOLOGICAL PROPERTIES OF 316L STAINLESS STEEL FABRICATED VIA METAL INJECTION MOLDING

被引：4
|
作者：
Zainon, Nurazilah Mohd [1 ]
Abdulah, Noorsyakirah [1 ]
Roslani, Norazlan [1 ]
Omar, Mohd Afian [1 ]
机构：
[1] SIRIM Berhad, Adv Mat Res Ctr AMREC, Struct Mat Program, Kulim 09000, Kedah, Malaysia
来源：
ADVANCED MATERIALS CONFERENCE (AMC 2012) | 2014年 / 879卷
关键词：
MIM; SS316L; Tribology; Friction Coefficient; Microstructure;
D O I：
10.4028/www.scientific.net/AMR.879.134
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tribological properties of sintered 316L stainless steel fabricated via injection molding were investigated. Tests were carried out at room temperature comparing metal injection molded dog bone tensile samples at different sintering temperatures. The parameter used for the pin on disk test is a 10kN load, 500m sliding distance and a chromium steel ball as a sliding partner. The morphologies and compositions of the worn surfaces were analyzed by SEM, Raman and XPS. The results showed that the wear mechanism and friction coefficient of SS316L depended strongly on the microstructure which was influenced by the sintering temperature.
引用
收藏
页码：134 / 138
页数：5
相关论文
共 50 条
  • [21] Delamination wear of metal injection moulded 316L stainless steel
    Kanchanomai, C.
    Saengwichian, B.
    Manonukul, A.
    WEAR, 2009, 267 (9-10) : 1665 - 1672
  • [22] Thermal debinding processing of 316L stainless steel powder injection molding compacts
    Li, YM
    Liu, SJ
    Qu, XH
    Huang, BY
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 137 (1-3) : 65 - 69
  • [23] Mixing and characterisation of 316L stainless steel feedstock for micro powder injection molding
    Liu, L
    Loh, NH
    Tay, BY
    Tor, SB
    Murakoshi, Y
    Maeda, R
    MATERIALS CHARACTERIZATION, 2005, 54 (03) : 230 - 238
  • [24] Effect of Immerse Temperature and Time on Solvent Debinding Process of Stainless Steel 316L Metal Injection Molding
    Kamarudin, Nur Hafizah
    Ibrahim, Mohd Halim Irwan
    COLLOQUIUM OF ADVANCED MECHANICS (CAMS2016), 2017, 165
  • [25] Microstructural comparison and mechanical properties of stainless steel 316L fabricated by selective laser melting and metal injection moulding processes
    Hamidi M.F.F.A.
    Harun W.S.W.
    Khalil N.Z.
    Samykano M.
    International Journal of Manufacturing Technology and Management, 2019, 33 (1-2) : 76 - 87
  • [26] Effect of laser texturing bulges on tribological properties of 316L stainless steel
    Li, Wen-Xuan
    Liu, Yan
    Duan, Hai-Tao
    Wang, Yi-Han
    Zhan, Sheng-Peng
    Zhang, Wu-Lin
    Yang, Tian
    Li, Guo-Zheng
    Dan, Jia
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2023, 11 (01)
  • [27] Effects of sintering conditions on the mechanical properties of metal injection molded 316L stainless steel
    Yoon, TS
    Lee, YH
    Ahn, SH
    Lee, JH
    Lee, CS
    ISIJ INTERNATIONAL, 2003, 43 (01) : 119 - 126
  • [28] Microstructure and properties of 316L stainless steel fabricated by laser direct forming
    Zhang, YZ
    Xi, MZ
    Shi, LK
    Cheng, J
    RARE METAL MATERIALS AND ENGINEERING, 2002, 31 (02) : 103 - 105
  • [29] Microstructure and properties of 316L stainless steel fabricated by laser direct forming
    Zhang, Yongzhong
    Xi, Mingzhe
    Shi, Likai
    Cheng, Jing
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2002, 31 (02):
  • [30] Acoustic Properties of 316L Stainless Steel Lattice Structures Fabricated via Selective Laser Melting
    Sun, Xiaojing
    Jiang, Fengchun
    Wang, Jiandong
    METALS, 2020, 10 (01)
12345