TRIBOLOGICAL PROPERTIES OF 316L STAINLESS STEEL FABRICATED VIA METAL INJECTION MOLDING

被引：4
|
作者：
Zainon, Nurazilah Mohd [1 ]
Abdulah, Noorsyakirah [1 ]
Roslani, Norazlan [1 ]
Omar, Mohd Afian [1 ]
机构：
[1] SIRIM Berhad, Adv Mat Res Ctr AMREC, Struct Mat Program, Kulim 09000, Kedah, Malaysia
来源：
ADVANCED MATERIALS CONFERENCE (AMC 2012) | 2014年 / 879卷
关键词：
MIM; SS316L; Tribology; Friction Coefficient; Microstructure;
D O I：
10.4028/www.scientific.net/AMR.879.134
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tribological properties of sintered 316L stainless steel fabricated via injection molding were investigated. Tests were carried out at room temperature comparing metal injection molded dog bone tensile samples at different sintering temperatures. The parameter used for the pin on disk test is a 10kN load, 500m sliding distance and a chromium steel ball as a sliding partner. The morphologies and compositions of the worn surfaces were analyzed by SEM, Raman and XPS. The results showed that the wear mechanism and friction coefficient of SS316L depended strongly on the microstructure which was influenced by the sintering temperature.
引用
收藏
页码：134 / 138
页数：5
相关论文
共 50 条
  • [31] Enhancement of 316 L stainless steel mechanical properties through TiC particle introduction via metal powder injection molding
    Gu, Da
    Wu, Dun
    Chen, Zexu
    Cao, Zheng
    Cheng, Junfeng
    Wang, Dong
    Lu, Xiangyu
    Liu, Chunlin
    MATERIALS RESEARCH EXPRESS, 2025, 12 (01)
  • [32] Impact of 316L Stainless Steel on Microstructural and Mechanical Properties of AA5083/316L Metal Matrix CompositesImpact of 316L Stainless Steel on Microstructural and Mechanical Properties of AA5083/316L Metal Matrix CompositesSekban
    Dursun Murat Sekban
    JOM, 2025, 77 (4) : 1969 - 1978
  • [33] Mixing and characterisation of stainless steel 316L feedstock for waste polystyrene binder system in metal injection molding (MIM)
    Asmawi, R.
    Ibrahim, M. H. I.
    Amin, A. M.
    MACHINE DESIGN AND MANUFACTURING ENGINEERING III, 2014, : 83 - 86
  • [34] Simulation on the Two-phase Separation of Powder Injection Molding 316L Stainless Steel
    Shang, Feng
    Qiao, Bin
    Dong, Yan-feng
    Cao, Zhen-wei
    Sun, Wei
    He, Yi-qiang
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2019, 25 (03): : 246 - 251
  • [35] Sintering study of 316L stainless steel metal injection molding parts using Taguchi method: final density
    Ji, CH
    Loh, NH
    Khor, KA
    Tor, SB
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 311 (1-2): : 74 - 82
  • [36] Fatigue Properties of 316L Stainless Steel
    Zhao, Xiao
    PROGRESS IN INDUSTRIAL AND CIVIL ENGINEERING, PTS. 1-5, 2012, 204-208 : 3786 - 3789
  • [37] Oxygen content control in metal injection molding of 316L austenitic stainless steel using water atomized powder
    Yu, Kaiping
    Ye, Shulong
    Mo, Wei
    Lv, Yonghu
    Jiang, Heng
    Ma, Rui
    Kwok, Chi Tat
    Yu, Peng
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 50 : 498 - 509
  • [38] Influence of Cathodic Arc Plasma Titanizing on Tribological Properties of 316L Stainless Steel
    Shi Jiajia
    Fu Zhiqiang
    Yue Wen
    Wang Chengbiao
    Peng Zhijian
    Yu Xiang
    Kang Jiajie
    RARE METAL MATERIALS AND ENGINEERING, 2016, 45 (07) : 1821 - 1825
  • [39] BONN Technique: Tribological Properties Predictor for Plasma Nitrided 316L Stainless Steel
    Sathish, T.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (06) : 14545 - 14552
  • [40] Effects of Titanium-Implanted Dose on the Tribological Properties of 316L Stainless Steel
    Wang, Wei
    Fu, Zhiqiang
    Zhu, Lina
    Yue, Wen
    Kang, Jiajie
    She, Dingshun
    Ren, Xiaoyong
    Wang, Chengbiao
    MATERIALS, 2021, 14 (06)
12345