TRIBOLOGICAL PROPERTIES OF 316L STAINLESS STEEL FABRICATED VIA METAL INJECTION MOLDING

被引：4
|
作者：
Zainon, Nurazilah Mohd [1 ]
Abdulah, Noorsyakirah [1 ]
Roslani, Norazlan [1 ]
Omar, Mohd Afian [1 ]
机构：
[1] SIRIM Berhad, Adv Mat Res Ctr AMREC, Struct Mat Program, Kulim 09000, Kedah, Malaysia
来源：
ADVANCED MATERIALS CONFERENCE (AMC 2012) | 2014年 / 879卷
关键词：
MIM; SS316L; Tribology; Friction Coefficient; Microstructure;
D O I：
10.4028/www.scientific.net/AMR.879.134
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tribological properties of sintered 316L stainless steel fabricated via injection molding were investigated. Tests were carried out at room temperature comparing metal injection molded dog bone tensile samples at different sintering temperatures. The parameter used for the pin on disk test is a 10kN load, 500m sliding distance and a chromium steel ball as a sliding partner. The morphologies and compositions of the worn surfaces were analyzed by SEM, Raman and XPS. The results showed that the wear mechanism and friction coefficient of SS316L depended strongly on the microstructure which was influenced by the sintering temperature.
引用
收藏
页码：134 / 138
页数：5
相关论文
共 50 条
  • [1] Tribological behavior of 316L stainless steel fabricated by micro powder injection molding
    Meng, Junhu
    Loh, Ngiap Hiang
    Tay, Bee Yen
    Fu, Gang
    Tor, Shu Beng
    WEAR, 2010, 268 (7-8) : 1013 - 1019
  • [2] OXIDE FORMATION IN METAL INJECTION MOLDING OF 316L STAINLESS STEEL
    Jang, Jin Man
    Lee, Wonsik
    Ko, Se-Hyun
    Han, Chulwoong
    Choi, Hanshin
    ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (02) : 1281 - 1285
  • [3] Injection molding of 316L stainless steel microstructures
    Z. Y. Liu
    N. H. Loh
    S. B. Tor
    Y. Murakoshi
    R. Maeda
    K. A. Khor
    T. Shimidzu
    Microsystem Technologies, 2003, 9 : 507 - 510
  • [4] Injection molding of 316L stainless steel microstructures
    Liu, ZY
    Loh, NH
    Tor, SB
    Murakoshi, Y
    Maeda, R
    Khor, KA
    Shimidzu, T
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2003, 9 (6-7): : 507 - 510
  • [5] Characterization of Mechanical Properties and Grain Size of Stainless Steel 316L via Metal Powder Injection Molding
    Hwang, In-Seok
    So, Tae-Yeong
    Lee, Do-Hoon
    Shin, Chang-Seop
    MATERIALS, 2023, 16 (06)
  • [6] INVESTIGATIONS ON METAL INJECTION-MOLDING OF 316L STAINLESS-STEEL
    VELTL, G
    HARTWIG, T
    PETZOLDT, F
    KUNZE, HD
    MATERIALS AND MANUFACTURING PROCESSES, 1995, 10 (03) : 425 - 438
  • [7] Investigation of stainless steel 316L/zirconia joint part fabricated by powder injection molding
    Gal, Chang Woo
    Han, Sang Soo
    Han, Jun Sae
    Lin, Dongguo
    Park, Seong Jin
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2019, 16 (01) : 315 - 323
  • [8] Sintering temperature effects on the properties of stainless steel 316L compact fabricated by metal injection moulding
    Manam N.S.
    Harun W.S.W.
    Ibrahim M.H.I.
    Khalil N.Z.
    Samykano M.
    International Journal of Manufacturing Technology and Management, 2019, 33 (1-2): : 37 - 52
  • [9] Oxidation of injection molding 316L stainless steel at high temperature
    Sobral, AVC
    Hierro, MP
    Pérez, FJ
    Ristow, W
    Franco, CV
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2000, 51 (11): : 791 - 796
  • [10] Injection molding, debinding and sintering of 316L stainless steel microstructures
    Fu, G
    Loh, NH
    Tor, SB
    Tay, BY
    Murakoshi, Y
    Maeda, R
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2005, 81 (03): : 495 - 500
12345